• Earthquakes and Structures
• /
• v.8 no.4
• /
• pp.935-956
• /
• 2015

Structural Health Monitoring (SHM) of steel towers has become a hot research topic. From the literature, it is impractical and impossible to develop a "general" method that can detect all kinds of damages for all types of structures. A practical method should make use of the characteristics of the type of structures and the kind of damages. This paper reports a feasibility study on the use of measured modal parameters for the detection of damaged braces of tower structures following the Bayesian probabilistic approach. A substructure-based structural model-updating scheme, which groups different parts of the target structure systematically and is specially designed for tower structures, is developed to identify the stiffness distributions of the target structure under the undamaged and possibly damaged conditions. By comparing the identified stiffness distributions, the damage locations and the corresponding damage extents can be detected. By following the Bayesian theory, the probability model of the uncertain parameters is derived. The most probable model of the steel tower can be obtained by maximizing the probability density function (PDF) of the model parameters. Experimental case studies were employed to verify the proposed method. The contributions of this paper are not only on the proposal of the substructure-based Bayesian model updating method but also on the verification of the proposed methodology through measured data from a scale model of transmission tower under laboratory conditions.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.502-507
• /
• 2003

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in-pool type, is under normal operation since it reached the initial critical in February 1995. The HANARO is used for fuel performance tests, radio isotope productions, reactor material performance tests, silicone semiconductor productions and etc. Specially, the HANARO is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading those at a flow tube (OR-5). The target should be sufficiently cooled in the flow tube without an interference with the cooling of the others and an induction of extremely vibration. This topic is described an analectic analysis for the cooling characteristics of the fission moly-99 target to find the minimum cooling water. It was confirmed through the analysis results that the minimum cooling water, about 2.717 kg/s flew through the flow tube under the worst case that the guide tube got no perforating holes for cooling water to pass through the holes and that the target was safely cooled under about seventy percent (70%) of the maximum allowable temperature of the target.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.2
• /
• pp.33-50
• /
• 2014

Objective : The purpose of this study is to analyze research trends on laser output used for treatment of hair loss. Methods : We searched papers using Pubmed, NDSL, KISS, and RISS. First search used the keyword "Laser, Alopecia" in Pubmed. Inclusion criteria were last 15 years, English, related to output. Finally we searched papers using the keyword "Laser and Alopecia" in NDSL, KISS, and RISS. Inclusion criteria were the same as first research except for English. Results : A total of 43 studies were found, 28 studies were excluded and 15 studies were selected and analyzed. And of the 15 studies, 7 studies were foreign papers and 8 studies were domestic papers on clinical application of laser status. Mainly Used type of laser was a diode laser. As a result, we found that treatment group had more improvement than control group. The range of the laser-output was 1mW-150W in Alopecia laser therapy. Conclusions : Low-level (LLLT) as well as High-level laser therapy (HLLT) can be effectively used as an alternative to the treatment of alopecia. Thus, further attention and studies are needed on this topic in order to reduce the side effects and demonstrate the effectiveness clearly.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.533-548
• /
• 2012

Dynamic analysis of concrete gravity dam-reservoir systems is an important topic in the study of fluid-structure interaction problems. It is well-known that the rigorous approach for solving this problem relies heavily on employing a two-dimensional semi-infinite fluid element. The hyper-element is formulated in frequency domain and its application in this field has led to many especial purpose programs which were demanding from programming point of view. In this study, a technique is proposed for dynamic analysis of dam-reservoir systems in the context of pure finite element programming which is referred to as the wavenumber approach. In this technique, the wavenumber condition is imposed on the truncation boundary or the upstream face of the near-field water domain. The method is initially described. Subsequently, the response of an idealized triangular dam-reservoir system is obtained by this approach, and the results are compared against the exact response. Based on this investigation, it is concluded that this approach can be envisaged as a great substitute for the rigorous type of analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.659-666
• /
• 2009

Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.183-192
• /
• 2014

With the rapid mobile phones and global diffusion of mobile marketing it is very important to understand cross-national consumer attitude and behavioral intentions toward mobile marketing as a promotional channel. Some areas of mobile advertising still need more investigation. Especially, the topic about consumer attitude toward mobile advertising has been received a considerable amount of attention. Based on the Technology Acceptance Model (TAM), this study investigates the relationship between characteristic of mobile advertising and purchase intention toward mobile advertising, and analyzes moderating effect of country type. The result of this study could help researchers and practitioners to understand which factors should be managed to increase the effectiveness of mobile advertising.

• International Journal of Knowledge Content Development & Technology
• /
• v.9 no.1
• /
• pp.19-42
• /
• 2019

This study examined activities involving the finding, organizing, managing, and re-finding of information by knowledge workers in Kuwait. This research also conducted a review of the tools needed for effective personal information management (PIM) and assessed perceptions about improving PIM through Internet use. Data were collected through semi-structured interviews conducted among 26 graduates of the Department of Information Studies at Kuwait University. These participants are currently employed in different sectors engaged in a variety of information-related activities. This study's findings indicated that participants gathered different types of information from a variety of sources. This information was stored using several devices and services, including desktop computers, shared drives, clouds, bookmarked websites, e-mail correspondence, and favorites lists. Participants organized information in personal folders according to categories such as subject/topic, time, project, document type, and geographical region. Preferred methods for information re-finding included searching by keyword and browsing through folders. Interviewees reported problems of information overload, fragmentation, and anxiety. Most were active in social media via mobile device, while some of them used Siri or Ask Google to retrieve information. Tools used for PIM included calendars, tasks, schedules, e-mail management tools, clouds, and social networking tools. Participants reported that the Internet helped with personal information management practices, but that some privacy issues arose in this context.

• Advances in concrete construction
• /
• v.7 no.1
• /
• pp.39-50
• /
• 2019

This study presents a comprehensive experimental investigation on mostly encountered types of Reinforced Concrete Haunched Beams (RCHBs) where three modes of RCHBs investigated; the diversity of studied beams makes it a pioneer in this topic. The experimental study consists of twenty RCHBs and four prismatic beams. Effects of important parameters including beam type, the inclination angle, flexure and compressive reinforcement, shear reinforcement on mechanical behavior and failure mode of each mode of RCHBs were examined in detail. Furthermore crack propagation at certain load levels were inspected and visualized for each RCHB mode. The results confirm that RCHBs have different behavior in shear as compared to the prismatic beams. At the same time, different mechanical behavior was observed between the modes of RCHBs. Therefore, RCHBs were classified into three modes according to the inclination shape and mode of failure (Modes A, B and C). However, it was observed that there is no significant difference between RCHBs and prismatic beams regarding flexural behavior. Moreover, a new and unified formula was proposed to predict the critical effective depth of all modes of RCHBs that is very useful to predict the critical section for failure.

• International Journal of High-Rise Buildings
• /
• v.7 no.4
• /
• pp.313-325
• /
• 2018

Concrete-filled steel tubular (CFST) members are commonly used as composite columns in modern construction. However, the current guidelines for members' fire design (EN1994-1-2) have been proved to be unsafe in case the relative slenderness is higher than 0.5. In addition, the simplified design methods of Eurocode 4 are limited to circular and square CFST columns, while in practice columns with rectangular and elliptical hollow sections are being increasingly used because of their architectural aesthetics. In the last years a large experimental research has been carried out at Coimbra University on the topic. They have been tested concrete filled circular, square, rectangular and elliptical hollow columns with restrained thermal elongation. Some parameters such as the slenderness, the type of cross-section geometry as well as the axial and rotational restraint of the surrounding structure to the column have been tested in order to evaluate their influence on the fire resistance of such columns. In this paper it is evaluated the influence of the boundary conditions (pin-ended and semi-rigid end-support conditions) on the behavior of the columns in case of fire. In these tests it could not be seen a marked effect of the tested boundary conditions but it is believed that the increasing of rotational stiffness increases the fire resistance of the columns.

• Journal of Information Science Theory and Practice
• /
• v.6 no.4
• /
• pp.54-64
• /
• 2018

This study aims to understand the information needs of Korean immigrant mothers in the United States for their high school children's college preparation. A content analysis was conducted for the messages posted to a "motherhood" forum on the MissyUSA website. In total, 754 posts were analyzed in terms of a child's grade, college preparation stage, type of post, and topic of post. The study found that there is a range of information needed at different stages in a child's education. Many of the demonstrated information needs showed similarities to those of other immigrant groups, but there were also community-specific themes, such as an emphasis on STEM (science, technology, engineering, and math) and standardized tests. The forum was mainly used for factual questions, not emotional support. We concluded that the findings of the study would help researchers in understanding immigrant information needs for the college application process and how information professionals and educators could combine the needs of different ethnic groups to create customized services for them.