• 제목/요약/키워드: Topdressing

검색결과 50건 처리시간 0.02초

잔디 재배지에서 배토와 경운처리에 의한 잔디생육 및 토양환경 개선 (Improvement of Growth and Soil Environment by Topdressing and Tillage in Zoysiagrass (Zoysia japonica) Cultivation Field)

  • 한정지;최수민;이광수;박용배;배은지
    • Weed & Turfgrass Science
    • /
    • 제5권3호
    • /
    • pp.165-169
    • /
    • 2016
  • 잔디 뗏장의 효율적인 생산을 위한 토양 관리 시스템을 구축하기 위해 토양관리에 따른 잔디의 생육에 대한 연구를 수행하였다. 토양관리는 4가지 방법 (1) 답압 처리구 (2) 배토 처리구 (3) 배토 +답압 처리구 (4) 배토 +경운 +답압 혼합 처리구로 실시하였다. 토양의 물리성은 배토 +경운 +답압 혼합 처리구가 답압과 배토 +답압 처리구에 비해 용적비중과 공극률, 고상비 등이 통계적으로 유의하게 개선되었으나, 배토 처리구와는 통계적으로 유의한 차이가 없었다. 토양 관리방법에 따른 잔디생육의 특성을 조사한 결과, 답압작업에 비해 배토만 하거나 배토와 함께 토양 경운의 방법을 추가하였을 때 식물체의 생육이 향상되는 결과를 나타내었다. 따라서 잔디 연작 재배지의 경우 토양 물리성 개선을 위한 배토, 경운, 답압등의 토양 갱신작업을 통해 잔디의 적정밀도 유지와 양질의 잔디를 생산할 수 있도록 해야 할 것이다.

Nitrogen Management with Split Application of Urea for Direct-Seeding Rice in Wet Paddy

  • Lee, Ho-Jin;Seo, Jun-Han;Lee, Jung-Sam;Jung, Yong-Sang;Fred E. Below
    • 한국작물학회지
    • /
    • 제43권1호
    • /
    • pp.49-53
    • /
    • 1998
  • Direct-seeding has major advantages such as labor and cost saving by eliminating preparation of seed bed and transplanting. But, it required increased input of fertilizers and pesticides because of the extended paddy period. Direct seeding in wet paddy (DSWP) gives faster growth and more uniform seedling emergence than direct-seeding in dry paddy. This research had an objective to develop an efficient N management practices for DSWP with split application of N fertilizer. A paddy field experiment was conducted to evaluate effects of starter N and N-topdressing which was delayed N application until 5-leaf stage, with comparison to transplanting (TP). Total amount of N application were two levels; 110kg and 77kg/ha. The N applications were split four times during rice growth stages; starter, topdressing at 5-leaf stage, top dressing at tillering stage, and topdressing at panicle initiation stage. DSWP had more tillers/$m^2$ than TP, but with the delayed heading. The DSWP plots which received N-topdressing at 5-leaf stage without starter N had higher leaf area index (LAI) and leaf greenness than the TP plot. Also, these DSWP plots had high leaf-N concentration at the heading stage, as calculated from leaf chlorophyll meter readings. Rice yield in DSWP with N-topdressing at 5-leaf stage was significantly higher than that in TP and in DSWP with starter N. Energy and N use efficiency were improved in DSWP with N-topdressing at 5-leaf stage. But, there were no significant differences in grain yield between the two levels of total amounts of N applications, 77kg and 110kg/ha. We concluded that starter N could not be used effectively by rice seedlings, but topdressing N at 5-leaf stage was an efficient N management for rice growth and yield in DSWP system.

  • PDF

수도(水稻) 가리시비(加里施肥) 효율향상(効率向上)을 위(爲)한 추비방법(追肥方法) (Topdressing method of Potassium for the better efficiency in rice)

  • 오왕근;유인수;박훈;김우진
    • 한국토양비료학회지
    • /
    • 제8권4호
    • /
    • pp.199-217
    • /
    • 1975
  • For the establishment of efficient method of potassium topdressing on rice the optimum time and amount were investigated and discussed on the basis of available data from nutriophysiological studies, soil characteristics and fertilizer trials in fields. The followings were pointed out. 1. According to yield rice plants require more potassium around heading under water culture. 2. Potassium involves in harvest index, filled grain ratio, grain weight and number of spikelets per panicle. 3. Potassium is lost after heading in most fields in spite of highest requirement during this period. 4. The higher $K_2O/N$ ratio in straw at harvest is, the higher the yield. 5. Relatively low efficiency of potassium fertilizer under the field condition may be due to improper application method rather than natural supply from soil and irrigation water. 6. Appropriate topdressing time appears at in effective tillering stage for the prevention of nitrogen excess and at 15 to 20 days after transplanting, ear formation stage and 5 days after heading for the prevention of soil reduction damage. Two times of topdressing for clayey soil and three times for sandy soil seems reasonable in practice together with nitrogen topdressing, 7. The reasonable ratio basal to topdressing of potassium fertlizer seems to be 2/3 and $N/K_2O$ ratio of fertilization for ear formation stage appeared also as 2/3.

  • PDF

배토처리의 높이가 한국잔디의 생육에 미치는 영향 (Effect of Topdressing Height on The Growth of Zoysiagrass (Zoysia japonica))

  • 배은지;이광수;박남창;허무룡
    • 농업생명과학연구
    • /
    • 제46권2호
    • /
    • pp.83-89
    • /
    • 2012
  • 본 연구는 배토작업에 따른 한국잔디의 적정 밀도와 질을 유지하기 위한 배토의 효과를 알아보기 위해 수행되었다. 배토를 하지 않은 처리구와 배토높이 2, 4, 8과 16 mm 처리구를 비교한 결과, 초장, 지상부, 포복경과 지하부의 생체중과 건물중, 포복경과 지상부의 개수는 배토높이가 높아질수록 증가하는 경향을 보였고, 엽록소와 카로티노이드 함량 또한 증가하였다. 지상부와 지하부의 전량질소, 전량인산, 전량가리, 전량고토, 전량석회도 배토를 하지 않은 처리구보다 배토높이가 높아질수록 증가하는 경향을 나타내었다. 배토를 하지 않은 처리구보다 배토처리구에서 산도가 증가하는 것으로 보아 알칼리화 되는 것으로 나타났고, 유기물 함량, 전질소, 치환성양이온($K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$) 농도는 증가하는 경향을 보였으나 유효인산은 감소하였다. 배토처리를 하지 않은 처리구보다 배토처리구에서 잔디의 생육이 증가하고, 밀도율이 높았으며, 토양 화학성도 양호하게 변화하였다. 배토높이에 따른 효과는 8 mm에서 토양내 유기물 함량과 전질소가 가장 높았고, 생육이 향상되는 것으로 보아 한국잔디에 대한 적정 배토높이인 것으로 판단된다.

한국의 골프 코스 그린의 관리 및 스피드 특성과 상관에 관한 연구 (Characteristics and Correlation between Green Management Practices and Speed in Korean Golf Courses)

  • 이상재;심경구;허근영
    • 한국조경학회지
    • /
    • 제28권4호
    • /
    • pp.29-43
    • /
    • 2000
  • This study is carried out to investigate the cahracteristics of green management practices and green speed(i.e., ball-roll distance) on 129 Golf Courses in Korea, and to explain the effects of managemet practices that affect green speed. Data collected from green-keepers were subjected to frequency, correlation analysis, and multi-regression analysis using SPSSWIN(Statistical Package for the Social Science). The results are as follows. 1. In spring mowing height, 3.5-4 mm appeared the highest frequency(44.4%) and 4-4.5mm mowing height appeared the high frequency(41.0%). In summer mowing height, 4.5-5mm appeared the highest frequency(51.3%). In fall mowing height, 4-4.5mm appeared the highest frequency(41.0%). 2. In N-fertilizing amount of February and November, 0(zero) g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of June and July 0-2 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of March, May, August, and September 2-4 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of October 2-4 or 6-8 g/$m^2$ appeared the highest frequency. 3. In spring topdressing times, 3-6 times appeared the highest frequency(52.6%). In spring topdressing amount, more than 2mm appeared the highest frequency(35.9%). In summer topdressing tierms, 0-3times appeared the highest frequency(71.8%). In summer topdressing amount, 0.5-1mm appeared the highest frequency(46.2%). In fall topdressing times, 0-3times appeared the highest frequency(47.4%). In fall topdressing amount, more than 2mm appeared the highest frequency(35.9%). 4. In spring irrigation tiems, 3-4times/a week appeared the highest frequency (30.6%). In spring irrigation amount, the irrigation below 5mm/day under appeared the highest frequency(38.7%). In summer irrigation times, 4-7times/ a week appeared the highest frequency(38.9%). In summer irrigation amount, 5-10mm/a day appeared the highest frequency(45.2%). In fall irrigation times, 2-3times/a week appeared the highest frequency(36.1%). In fall irrigation amount, the irrigation below 5mm/a day under appeared the highest frequency(45.2%). 5. In spring aeration times, 2 times appeared the highest frequency(55.2%). In spring aeration depth, 5-10mm appeared the highest frequency(81.6%). In fall aeration times, 1 time appeared the highest frequency(82.5%). In fall aeration depth, 5-10mm appeared the highest frequency(86.8%). 6. In spring green speed, 1.98-2.28 or 2.59-2.89mm appeared the highest frequency(32.7%). In summer green speed, 1.98-2.28mm appeared the highest frequency (46.9%). In fall green speed, 1.98-2.28mm appeared the highest frequency(38.8%). 7. The factors which affect green speed were mowing height, N-fertilizing, season, topdressing, irrigation, and aeration. Vertical mowing did not affect green speed. The order of the relevant important factors was mowing height >: N-fertilizing > season > topdressing > irrigation > aeration. Mowing height and N-fertilizing were the most important factors in green speed. As mowing height decreased, green sped always increased. As total N-fertilizing amount decreased, green speed increased. In summer, green sped decreased remarkably. As topdressing times increased and the topdressing amount decreased, green sped increased. As irrigation times increased and irrigation amount decreased, green speed increased.

  • PDF

양파(Allium cepa L,) 멀칭재배시 질소비료 추비방법이 생육, 수량 및 저장성에 미치는 영향 (Effect of Topdressing Methods of Nitrogen Fertilizer on Growth, Yield and Storage of Onion(Allium cepa L.) in Mulch-Cropping System)

  • 김우일;서전규
    • 한국식품저장유통학회지
    • /
    • 제5권2호
    • /
    • pp.127-132
    • /
    • 1998
  • In order to fad out an efficient way of topdressing nitrogen fertilizer in mulch-cropping system of onion(Allium cepa L.), solid, slow-release, and liquid forms of nitrogen fertilizers were allied to cv. 'Changnyungdaego' various number of times at different time, with 5 topdress applications of solid fertilizer serving as a control. Whole basal application of conventional solid fertilizer and 2 slow-release fertilizers were labor-saving and showed improved storage quality of bulbs, but resulted in poor plant growth and considerably low yield due to fertilizer shortage from early April. This suggests that topdress application is necessary. Liquid form of nitrogen fertilizer was more effective for plant growth and yield and saving labor than the solid form. Early applications was effective for increasing yield and storage quality of onion bulbs harvested. Thus two applications of liquid form of nitrogen fertilizer in February and March at rome month interval are recommended in mulch crowing system of onion.

  • PDF

질소 시비조건에 따른 벼 품종의 미질과 식미특성 반응 (Varietal Response to Grain Quality and Palatability of Cooked Rice Influenced by Different Nitrogen Applications)

  • 김정일;최해춘;김광호;안종국;박노봉;박동수;김춘송;이지윤;김제규
    • 한국작물학회지
    • /
    • 제54권1호
    • /
    • pp.13-23
    • /
    • 2009
  • 질소수비 및 실비 시용량을 증시하여 미립내 단백질함량을 증가시킴으로써 이에 따른 식미저하와 쌀의 구조적 특성의 품종별 반응을 정밀하게 분석 검토하였으며, 그 결과를 요약하면 다음과 같다. 1. 현미 단백질함량은 질소 수비 실비의 증량에 따라 표준구(N6) 대비 $35{\sim}47%$까지 증가하였으며 식미가 낮은 품종일수록 증가 정도가 컸고, 동일한 질소 15kg/10a 수준으로 1,2차 수비가 충분히 준 조건에서도 1차 추비에 비해 실비를 준 경우 유메히까리와 레이호우는 현미 단백질함량이 유의하게 증가하였다. 2. 아밀로스함량은 질소 수비 실비의 증시에 따라 대체로 단백질함량과 반대로 변화정도는 품종간 차이보다 미미하지만 감소하는 경향을 나타내었다. 3. 식미 관능총평은 히노히까리 > 유메히까리 > 레이호우 순으로 높았는데 N 12 kg/10a 이상에서 질소 수비 실비 증시에 따라 유의하게 감소하는 경향을 보였으며 식미가 낮은 품종일수록 저하 정도가 컸고, 모든 식미관능 특성이 아밀로스함량보다 단백질함량 변화에 따라 크게 좌우되었으며 식미가 양호한 품종보다 식미가 낮은 품종에서 단백질함량 변화의 영향이 컸다. 4. 미립의 층위별 분포를 보아 외층에서 내층으로 갈수록 단백질함량은 현저히 감소하였고 아밀로스함량은 증가하였다. 식미가 양호한 품종이 낮은 품종에 비해 단백질함량의 분포가 겨층에서 높은 반면 백미층에서 크게 낮았으며 특히 아밀로스함량의 백미 외층 분포비율이 낮았다.

벼 휴립건답직파 절수재배에 알맞은 질소 분얼비 시비량 (Optimum N Topdressing for Tillering in Ridge Direct Seeding on Dry Paddy of Rice as an Irrigation Water-Saving Cultural System)

  • 최원영;김상수;송동석;최선영
    • 한국농림기상학회지
    • /
    • 제3권2호
    • /
    • pp.75-80
    • /
    • 2001
  • 본 연구는 벼 휴립건답직파 절수재배시 적정 질소 분얼비 시비량을 알아보고자 전북통(미사질양토)에서 동진벼를 공시하여 파종량을 60kg/ha과 100kg으로 하고 질소 분얼비 시비량을 ha당 48kg(표준구), 60kg, 72kg, 84kg 및 96kg을 시비하여 시험한 결과를 요약하면 다음과 같다. 엽면적지수와 지상부 건물중은 분얼비 시비량이 많을수록 약간 높았고, 파종량간에는 100kg/ha이 60 kg/ha보다 높았다. 시비절소 이용율은 표준 분얼비 대비 50~75%증시에서 높았고 100% 증시에서는 낮았으며, 질소 시비효율은 표준 시비량에서 높았다. 분얼비 시비량 및 파종량간에 출수기는 같았고 m$^2$당 수수와 당 립수는 분얼비 75% 증시(84kg/ha)에서 많았으며, 등숙비율과 현미 천립중은 비슷하였다. 쌀 수량은 (60kg/ha 파종시 질소 분얼비 48kg/ha 시용) 보다 50~75% 증시(84kg/ha)한 처리에서 파종량 60kg/ha에서는 5%, 100kg/ha에서는 16~17% 증수되었다. 따라서 벼 휴립건답직파 절수재배에 알맞은 질소 분얼비는 표준 대비 50~75% 증시한 72~84kg/ha이 적당할 것으로 판단된다.

  • PDF

Using Chlorophyll(SPAD) Meter Reading and Shoot Fresh Weight for Recommending Nitrogen Topdressing Rate at Panicle Initiation Stage of Rice

  • Nguyen, Hung The;Nguyen, Lan The;Yan, Yong-Feng;Lee, Kyu-Jong;Lee, Byun-Woo
    • Journal of Crop Science and Biotechnology
    • /
    • 제10권1호
    • /
    • pp.33-38
    • /
    • 2007
  • Nitrogen management at the panicle initiation stage(PI) should be fine-tuned for securing a concurrent high yield and high quality rice production. For calibration and testing of the recommendation models of N topdressing rates at PI for target grain yield and protein content of rice, three split-split-plot design experiments including five rice cultivars and various N rates were conducted at the experimental farm of Seoul National University, Korea from 2003 to 2005. Data from the first two years of experiments were used to calibrate models to predict grain yield and milled-rice protein content using shoot fresh weight(FW), chlorophyll meter value(SPAD), and the N topdressing rate(Npi) at PI by stepwise multiple regression. The calibrated models explained 85 and 87% of the variation in grain yield and protein content, respectively. The calibrated models were used to recommend Npi for the target protein content of 6.8%, with FW and SPAD measured for each plot in 2005. The recommended N rate treatment was characterized by an average protein content of 6.74%(similar to the target protein content), reduced the coefficient of variation in protein content to 2.5%(compared to 4.6% of the fixed rate treatment), and increased grain yield. In the recommended N rate treatments for the target protein content of 6.8%, grain yield was highly dependent on FW and SPAD at PI. In conclusion, the models for N topdressing rate recommendation at PI were successful under present experimental conditions. However, additional testing under more variable environmental conditions should be performed before universal application of such models.

  • PDF

폐타이어 칩이 한국들잔디의 내답압성에 미치는 영향 (Effect of Crumb Rubber on the Wear Tolerance of Korean Lawngrass)

  • Lee, Chung-Hwan;Kim, Ki-Sun
    • 아시안잔디학회지
    • /
    • 제17권1호
    • /
    • pp.19-33
    • /
    • 2003
  • 본 실험은 답압에 의한 스트레스를 경감시킬 목적으로 폐타이어 칩을 한국잔디 식재 토양내 혼합 및 표면 배토시 그 효과를 평가하고자 실시하였다. 일반적으로 잔디는 답압이 진행됨에 따라 잔디 마모와 토양 물리성이 나빠져서 생육은 감소하지만 폐타이어 칩을 토양내에 처리함으로써 토양경도, 표면 경도 등 토양 물리성을 향상시키므로 생육을 향상시킬 수 있었으며, 토양 혼합처리는 가는 입자 20% 처리구에서 좋은 토양 물리성을 보였다. 배토처리시에는 무처리구와 비교시 표면의 높은 온도와 더불어, 피복효과와 마모를 가장 많이 받는 줄기 밑부분을 보호해 줌으로써 잔디 생육을 향상시킬 수 있었으며, 굵은 입자 10cm 처리구에서 표면온도가 높았다. 무기질인 폐타이어 칩을 소량으로 토양 혼합 및 배토처리함으로써 장기적인 효과가 예상되므로 향후 잔디면 조성 및 관리시에 이용할 만한 가능성이 있다고 생각된다.