• 전기전자학회논문지
• /
• 제4권2호
• /
• pp.288-294
• /
• 2000

본 논문에서는 동영상 압축 기법을 향상시키기 위하여 효율적인 detail 추출 기법을 제안한다. 기존의 top-hat 변환을 이용한 기법은 고립되어 있고 시각적으로 중요한 detail의 추출에는 효율적이지만, 영역의 경계에서는 비효율적이다. 제안된 기법은 수리형태학적 Laplacian 연산의 영역경계 정보추출의 성질을 이용하여 압축을 향상시키고 저비트율을 제공한다. 실험결과를 통해서 제안된 기법이 기존 기법보다 효율적임을 보이고 수리형태학적 Laplacian 연산 적용의 타당성을 설명한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.431-433
• /
• 2007

본 논문에서는 복잡한 영상, 특히 컨테이너 식별자가 속해 있는 영상에서의 문자영역을 추출하기 위하여 top-hat morphology 기법을 통해 획득된 텍스쳐 정보를 가로 및 세로 가중치를 가지는 클러스터링 기법을 이용하여 추출하는 방법을 제안한다. 실험을 통해 제안한 방법의 성능을 검증하고, 기존에 알려진 텍스쳐와 히스토그램을 이용하는 방법 등과 비교하여 그 성능이 향상됨을 확인한다.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.476-487
• /
• 1997

To resolve several arguments raised for the current analysis of a structure like top hat, which is composed of flange, cylinder and plate, the dynamic response analysis is performed for the full and half models. The dynamic characteristics are investigated for full and half models and the results are compared between them. The responses such as bolt reactions and stresses due to random loading are also obtained using the analysis capabilities between commercial programs which have the routine for the random vibration analysis. Several general purpose structural analysis programs are used to get the response due to the random loadings. Also the application of the random loading and the effect of correlations such as fully correlated, partially correlated and fully uncorrelated cases are studied and the general directions for the generation of design loads due to random loading are suggested.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.223-228
• /
• 1996

To resolve several arguments raised for the current analysis of a structure like top hat, which is composed of flange, cylinder and plate, the dynamic response analysis is performed for the full and half models. The dynamic characteristics are investigated for full and half models and the results are compared between them. The responses such as bolt reactions and stresses due to random loading are also obtained using the analysis capabilities between commercial programs which have the routine for the random vibration analysis. Several general purpose structural analysis programs are used to get the response due to the random loadings. Also the application of the random loading and the effect of correlations are studied and the general directions for the generation of design load due to random loading are suggested.

• 한국광학회지
• /
• 제16권2호
• /
• pp.152-158
• /
• 2005

출력거울로 GRM(Gaussian reflectivity mirror)을 채택한 불안정 공진기를 구성하여 그 Q-스위치 출력의 특성을 분석하였다. 입력 전기에너지가 55J 일 때 1064 nm의 기본파장에서 470 mJ, 532 nm의 제2고조파 파장에서 280 mJ의 출력 에너지를 얻었다. 출력빔의 발산각은 1.7 mrad 이었으며 근접장 영역에서 Top-Hat 형태의 빔을 얻을 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.

• 한국콘텐츠학회논문지
• /
• 제13권12호
• /
• pp.38-47
• /
• 2013

다중 레이어 영상 모델인 Mixed Raster Content 모델 (MRC) 기반의 영상 부호화는 스크린 이미지와 같은 혼합 영상을 전경 레이어, 이진 마스크 레이어, 배경 레이어로 재구성한 뒤, 각 레이어마다 그 레이어의 신호 특성에 적합한 부호화기를 이용하여 영상을 압축하는 기법이다. 문자와 같은 계단 형태의 강한 에지를 갖는 영역의 위치 정보를 마스크 레이어에 저장하고, 그 위치의 색상 신호는 전경 레이어에 저장한다. 그리고 나머지 영역인 배경 영역의 색상 신호는 배경 레이어에 저장한다. 따라서 마스크 레이어가 전경과 배경의 분할 정보를 담게 되며, 이 분할 정보의 정확도에 따라 전체 부호화기의 압축 효율이 직접적인 영향을 받는다. 본 논문은 MRC 기반의 영상 부호화를 위한 새로운 레이어 분할 알고리즘을 제안한다. 제안 방법은 형태학적 필터인 top hat 변환을 이용하여 문자를 배경신호로부터 분할한다. 이때 문자의 경계를 에지 맵으로부터 추정하여 문자 색상과 배경과의 상대적 밝기를 결정하고 이를 통해 형태학적 필터링에 필요한 top hat 변환의 종류를 정확히 선택하도록 하였다. 실험을 통해 제안 방법이 비교 대상 알고리즘에 비해 우수한 분할 성능을 가짐을 보인다.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.17-22
• /
• 2011

Ultimate goals in vehicle design can be summarized as environment-friendliness and safety. Along with these requirements, the importance of natural environment conservation has been focused lately. Therefore, reduced emission from vehicle and improved efficiency has become the top priority projects throughout the world. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a widely application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. This study is to investigate the energy absorption characteristics of CFRP hat-shaped section members under the axial impact collapse test. The CFRP hat-shaped section members which manufactured from unidirectional prepreg sheets were made of 8plies. The axial impact collapse tests were carried out for each section members. The collapse mode and energy absorption characteristics were analyzed for CFRP hat-shaped section member according to the interface numbers(2, 3, 4, 6 and 7).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.379-379
• /
• 2010

Recent technical advances in OLEDs (organic light emitting devices) requires more and more the improvement in low operation voltage, long lifetime, and high luminance efficiency. Inverted top emission OLEDs (ITOLED) appeared to overcome these problems. This evolved to operate better luminance efficiency from conventional OLEDs. First, it has large open area so to be brighter than conventional OLEDs. Also easy integration is possible with Si-based driving circuits for active matrix OLED. But, a proper buffer layer for carrier injection is needed in order to get a good performance. The buffer layer protects underlying organic materials against destructive particles during the electrode deposition and improves their charge transport efficiency by reducing the charge injection barrier. Hexaazatriphenylene-hexacarbonitrile (HAT-CN), a discoid organic molecule, has been used successfully in tandem OLEDs due to its high workfunction more than 6.1 eV. And it has the lowest unoccupied molecular orbital (LUMO) level near to Fermi level. So it plays like a strong electron acceptor. In this experiment, we measured energy level alignment and hole current density on inverted OLED structures for hole injection. The normal film structure of Al/NPB/ITO showed bad characteristics while the HAT-CN insertion between Al and NPB greatly improved hole current density. The behavior can be explained by charge generation at the HAT-CN/NPB interface and gap state formation at Al/HAT-CN interface, respectively. This result indicates that a proper organic buffer layer can be successfully utilized to enhance hole injection efficiency even with low work function Al anode.