• Carbon letters
• /
• 제13권4호
• /
• pp.248-253
• /
• 2012

Dielectrophoretic filtering and alignment of single-walled carbon nanotubes (SWCNTs) were tested using deuterium oxide as a solvent. A solution of deuterium oxide-SWCNTs was dropped on top of a silicon chip and an ac electric field was applied between pre-defined electrodes. Deuterium oxide was found to be a better solvent than hydrogen oxide for the dielectrophoresis process with higher efficiency of filtering. This was demonstrated by comparing Raman spectra measured on the initial solution with those measured on the filtered solution. We found that the aligned nanotubes along the electric field were not deposited on the substrate but suspended in solution, forming chain-like structures along the field lines. This so-called pearl chain formation of CNTs was verified by electrical measurements through the aligned tubes. The solution was frozen in liquid nitrogen prior to the electrical measurements to maintain the chain formation. The current-voltage characteristics for the sample demonstrate the existence of conduction channels in the solution, which are associated with the SWCNT chain structures.

• 산업기술연구
• /
• 제34권
• /
• pp.39-43
• /
• 2014

This paper represents a highly porous MWCNT film electrode with interconnected open pores and demonstrated the possibility of using an MWCNT network film as the top electrode for polyimide capacitive humidity sensors. Polyimide humidity sensors with MWCNT electrodes exhibited about 6 times faster response than equivalent Cr electrode sensors. This result may be due to their percolated pore structures, which make water molecules accessible to all polyimide surfaces. The much faster response times of MWCNT electrode sensors is attributed to the percolated pore network, which allows more water molecules to be accessible to polyimide surfaces.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.257-263
• /
• 2015

In this study, organic field-effect transistors (OFETs) using a copper phthalocyanine (CuPc) material as an active layer and SiO₂ as a gate insulator were fabricated with varying active layer thicknesses and channel lengths. Further, using a thermal evaporation method in a high-vacuum system, we fabricated a CuPc FET device of the top-contact type and used Au materials for the source and drain electrodes. In order to discuss the channel formation and FET characteristics, we observed the typical current-voltage characteristics and calculated the threshold voltage of the CuPc FET device. We also found that the capacitance reached approximately 97 pF at a negative applied voltage and increased upon the accumulation of carriers at the interface of the metal and the CuPc material. We observed the typical behavior of a FET when used as an n-channel FET. Moreover, we calculated the threshold voltage to be about 15-20 V at V_DS = -80 V.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.619-621
• /
• 2008

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. The CuPc FET device was made a top-contact type and the substrate temperature was room temperature. The source and drain electrodes were used an Au and Al materials. The CuPc thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with different electrode materials.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.561-563
• /
• 2012

In this work, tunable capacitors using a finger-type electrode are designed and characterized for frequency-agile RF circuit applications. Their top electrodes with different area and line width are designed in types of the finger for a long conducting perimeter which results in enhanced fringing-electric fields in order to improve their tunability. The tunable varactors were fabricated on a quartz substrate employing a multi-layer dielectric of a para/ferro/para-electric thin film. Compared to the conventional capacitor, finger-type capacitors are characterized in terms of effective capacitance and tunablility. Their effective capacitance and tunability with the long perimeter increase 24~40% and 7~12%, respectively, due to enhanced fringing electric fields from 1 to 2.5 GHz, compared to the conventional ones.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.407-410
• /
• 2005

We report on a high speed flexible display based on a deformed helix ferroelectric liquid crystal (DHFLC) in a vertically aligned configuration. The mechanical stability of the flexible DHFLC display was achieved using a periodic array of columnar spacers formed directly on the top sides of in-plane electrodes by the photolithography technique. Several unique features of display performances such as flexibility, uniform alignment, fast response, and gray scale capability were obtained.

• 센서학회지
• /
• 제16권6호
• /
• pp.449-456
• /
• 2007

The work described in this study concerns the development of a disposable amperometric sensor for the electrochemical detection of a well-known aqueous pollutant, free available chlorine (FAC). The FAC sensor developed used screen printed carbon electrodes (SPCEs) coupled with immobilised syringaldazine, commonly used as an indicator in photometric FAC detection, which was directly immobilised on the surface of SPCEs using a photopolymer PVA-SbQ. To enable in-field analysis of FAC, a prototype hand-held electrochemical analyzer has been developed to withstand the environment with its rugged design and environmentally sealed connections; it operates from two PP3 (9 volt) batteries and is comparable in accuracy and sensitivity to commercial bench top systems. The sensitivity of the FAC sensor developed was $3.5{\;}nA{\mu}M^{-1}cm^{-2}$ and the detection limit for FAC was found to be $2.0{\;}{\mu}M$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.67.2-67.2
• /
• 2012

Graphene is expected to have a significant impact in various fields in the foreseeable future. For example, graphene is considered to be a promising candidate to replace indium tin oxide (ITO) as transparent conductive electrodes in optoelectronics applications. We report the tunability of the wavelength of localized surface plasmon resonance by varying the distance between graphene and Au nanoparticles [1]. It is estimated that every nanometer of change in the distance between graphene and the nanoparticles corresponds to a resonance wavelength shift of ~12 nm. The nanoparticle-graphene separation changes the coupling strength of the electromagnetic field of the excited plasmons in the nanoparticles and the antiparallel image dipoles in graphene. We also show a hysteresis in the conductance and capacitance can serve as a platform for graphene memory devices. We report the hysteresis in capacitance-voltage measurements on top gated bilayer graphene which provide a direct experimental evidence of the existence of charge traps as the cause for the hysteresis [2]. By applying a back gate bias to tune the Fermi level, an opposite sequence of switching with the different charge carriers, holes and electrons, is found [3]. The charging and discharging effect is proposed to explain this ambipolar bistable hysteretic switching.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1261-1268
• /
• 2001

Effective material properties of active fiber composites with interdigitated electrodes are derived as a function of the fiber volume fraction. For the purpose of applying the rule of mixture, three unit cell models are introduced; each for the deformation and stress continuities in the out of plane and in-plane directions, and the continuity of the electrical displacement in the longitudinal direction. Derived effective material properties are compared with the results by the finite element method; good agreements are observed between them. As an application, the electromechanical behavior of the angle ply laminates with the active fiber layers bonded on the top and bottom surfaces are investigated; the angle of piezoelectric fiber to maximize the twisting curvature is obtained using the present model.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.621-625
• /
• 2001

본 논문에서는 압전박막 및 이들의 FBAR 소자 응용에 대한 연구를 발표 한다. FBAR 소자는 상부 및 하부 전극 사이에 압전체가 삽입되어 있는 공진부와 SiO$_2$/W 이 여러층으로 적층되어 있는 음향반사층부분 크게 두 부분으로 구성되어 있다. 시뮬레이션 및 측정을 통하여 제작된 여러가지 FBAR 소자들을 평가하였다. 실험결과 우수한 삽입손실, 반사손실 및 품질계수가 얻어졌다. 따라서 FBAR 기술은 RF 대역 필터 응용을 위해서 대단히 유망한 기술로 생각된다.