• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.166-176
• /
• 1990

Experimental study was made to find the effective ways for cooling of engine room in a power car through natural ventilation, forced ventilation and wind tunnel test of 1:10 model. Through the measurements of inner temperature of engine room and pressure distribution of model surface for the various opening combinations and the fan locations, the following results are obtained. For natural ventilation, side and top opening combination is more effective than the side openings only and optimal opening combination is all side openings with top center opening. For forced ventilation with fan on the roof, the combination of all sides and top opening is more effective than the combination of side and top opening, and the optimal location of fan is top center. When the model is located in the air stream, the combination of side and top opening is more effective than the side openings only, and the optimal location of top opening is the front opening. With both air stream and forced ventilation, the optimal location of fan is the side region, and the direction of side grill installation is found to have negligible effect on the room ventilation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.60-66
• /
• 2004

The effects of roll diameter, winding time, winding methods and relative humidity on curl In newsprints(46$g/m^2$, 54 $g/m^2$, and 54 $g/m^2$ SNC) are examined. The larger MD curl appears at smaller roll diameter, with the extension of winding time, and at the treat ment of soft nip calendering. The MD curl shows the back side curl at winding methods with top side as outer side(TSO), and the top side curl with top side as inner side(TSI). While the CD curl in newsprints( 46 $g/m^2$, and 54 $g/m^2$ SNC) treated with calender is hardly influenced by the storage times, roll diameter, and winding methods. However the CD curl in newsprint(54 $g/m^2$) gradually increases to a two weeks, and then hold constant regardless of roll diameter and winding methods.. The CD curl shows always the top side curl regardless of winding methods. At high relative humidity, the CD curl largely reduces, but the MD curl is not nearly changed. Especially, the CD curl in news-prints(54 $g/m^2$ SNC) is little affected by the changes of relative humidity.

• Korean Journal of Community Nutrition
• /
• v.13 no.3
• /
• pp.346-358
• /
• 2008

The purpose of this study is to find differences in dietary patterns through menu analysis by economic status. The data was obtained from the 1998 and 2001 National Health and Nutrition Survey of Korea. The main variables were economic status, sex, and area by urbanization. The economic status was classified into low, middle, high, and top classes using a poverty line based on the 1998 and 2001 minimum standard cost of living. The areas were divided into metropolis, small city, and rural areas. The dishes of 3 meals were classified into 29 categories by cooking method. The most frequent pattern was "rice + soup + kimchi". The frequency of this Korean basic dietary pattern was the lowest in the top income class and metropolis areas, while the highest in the low income class and rural areas. The frequency of Korean recommended dietary pattern, that is, "rice + soup or stew + kimchi + side dish" was the highest in the top income class. The metropolis group preferred side dishes using meat and a cooking method that saved time, but the rural group preferred side dishes using vegetables and cooking methods that take a longer time. In comparison of dietary pattern between male and female by economic status, the higher economic status, the male's dietary patterns showed more side dishes than those of female. But the main side dish was kimchi in male low class. Consequently, the major dietary pattern in Korea is rice-style, though the western pattern is increasing in the top income class, especially in metropolis areas. Therefore, to make a better dietary pattern, we should develop and spread low-priced recipes of various side dishes and teach financial skills such as ability to make a food budget for lower income classes. Also, we should emphasize the importance of the balance between meat and vegetables and traditional diet and western diet for the top income class, especially in the metropolis areas.

• Journal of Navigation and Port Research
• /
• v.35 no.2
• /
• pp.113-119
• /
• 2011

This paper is a part of the development on the safe navigation model of tugs and barges in Korea waters. desk-top tug-barge simulator is to train the crew of tugs and barges, especially tugs' crew. It is connected with steering and engine telegraph console and winch control console, and can describe three types of operation mode for a tug-barge working unit, towing mode, side by side and push mode. It can also record and assess each simulation run. The evaluation module can confirm the result of a finished simulation run and help trainees to find and correct their faults, and it is composed of result evaluation and process evaluation.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.18 no.3
• /
• pp.217-223
• /
• 2014

Objectives This study is on the implementation of the electric cauterizer with the hole for acupuncture to achieve the superposition effect of acupuncture-moxibustion therapies. Methods In this paper, we especially made a hole across the heat terminal of the electric cauterizer for acupuncture. Before the cauterization, the doctor treats a patient with needle. And after acupuncture, the heat terminal is to be superposed upon the needle along the hole to add the cauterization. Results There are 2 coupling methods that the heat terminal is to be superposed with the needle; one is the top-coupling and the other is side-coupling. The top-coupling means that the heat terminal is to be superposed upon the needle along the top of the needle, and side-coupling means that the heat terminal is to be superposed to the needle along the side of the needle. Conclusion This study was aimed to implement the electric cauterizer with the hole for acupuncture to achieve the superposition effect of acupuncture-moxibustion therapies. Not electric acupuncture but manual acupuncture is adopted. The electric cauterizer generates the heat $38{\sim}45^{\circ}C$. This heat is safe for skin not to burn. The electric cauterizer constitutes the smokeless moxa- pad which effects the skin DDS.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.10-17
• /
• 2009

Wyner-Ziv video coding is a new video compression paradigm based on distributed source coding theory of Slepian-Wolf and Wyner-Ziv. Wyner-Ziv coding enables light-encoder/heavy-decoder structure by shifting complex modules including motion estimation/compensation task to the decoder. Instead of performing the complicated motion estimation process in the encoder, the Wyner-Ziv decoder performs the motion estimation for the generation of side information in order to make the predicted signal of the Wyner-Ziv frame. The efficiency of side information generation deeply affects the overall coding performance, since the bit-rates of the Wyner-Ziv coding is directly dependent on side information. In this paper, an improved side information generation method using field coding is proposed. In the proposed method, top fields are coded with the existing SI generation method and bottom fields are coded with new SI generation method using the information of the top fields. Simulation results show that the proposed method improves the quality of the side information and rate-distortion performance compared to the conventional method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.110-113
• /
• 2010

해양플랜트 구조물은 대양에서 파력을 비롯한 바람 등과 같이 자연에 의해 발생하는 다양한 외력을 구조물 사용기간 동안 지속적으로 랜덤하게 받게 되므로 이로 인한 피로현상이 발생하게 된다. 특히 용접부로 이루어진 격점부는 복잡한 기하형상의 영향으로 피로에 대해 취약구조가 되므로 피로강도향상은 해양플랜트 구조의 안전성에 중요한 요인이 된다. 본 연구에서는 격점부에 대한 구조상세에 관련한 설계기준 및 평가방법을 조사하였으며, 고정식 Jacket 구조물을 대상으로 프레임요소를 사용하여 구조해석을 실시하여 공용하중에 대한 구조거동을 분석하였다. 또한 격점부의 강도평가방법 및 연결부 피로강도를 개선하기 위하여 프레임요소의 구조해석을 토대로 복잡한 기하형상을 가진 KT형 관이음부(Tubular Joints)에 대해 상세해석을 실시하였다.

• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.337-342
• /
• 2019

This paper presents an experimental investigation of friction and wear characteristic with respect to patterns occurring on the surface of 3D printed polymer products by fused deposition modeling method. The purpose of this study was to investigate the effect of the patterns and sliding directions on the tribological properties of 3D printed polymer surface. A cubic specimen was printed using polylactic acid filament as the printing material. Friction tests were conducted for different directions with respect to the patterns that were generated on the top and the side surfaces of the specimen, by using a ball-on-reciprocating type tribotester. SUJ2 bearing ball of which the diameter was 11 times greater than the width of the largest pattern was used as the counter surface to assess the frictional behavior. Friction tests were conducted on the top and the side surfaces with respect to the patterns in 3 (0°, 45°, 90°) different directions respectively. Coefficient of friction increased as cycles increased in all cases. The results of the tests showed that the lowest coefficient of friction was measured with the 45° sliding direction on the side surface. The wear rate was the lowest at 45° sliding direction on the side surface, while it was the highest at 0° sliding direction on the top surface. Coefficient of friction of about 0.45 was determined to be the converging value on the top compared to the side surface.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.73-79
• /
• 2004

Mountain side ditch is constructed at the top of cutting slopes around road and it drains the surface water that flowed from upper part. Mountain side ditch is constructed to keep away the influx of the surface water into cutting faces. However, if Mountain side ditch is constructed on the top of cutting slopes, it is cause of trouble. For example, difficulty of quality control and lack of drainage faculty. Therefore, the faculty and establishment propriety of mountain side ditch are evaluated seriously, according to the condition of ground, topography and rainfall in this paper. Results from the study for the numerical analysis of effect of mountain side ditch indicate that safety factor is enlarged about 3% at rainfall.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.86-93
• /
• 2009

Elastomeric O-rings have been the most common seals due to their excellent sealing capacity, and availability in costs and sizes. One of the critical applications of O-ring seals is solid rocket motor joint seal where the operating hot gas must be sealed during the combustion. This has long been a design issue to avoid the system failure. For laterally constrained, squeezed and pressurized condition, deformed shape of O-ring was measured by computed tomography method and CCD laser sensor, compared with numerical calculations. As clearance gap changes, sealing performance had been evaluated on peak contact stresses at top, bottom and side contact surfaces. As clearance gap increases, peak contact stresses and contact widths in top and side contact surfaces increase, and the asymmetry of stress distributions is promoted due to pressure increase. It is suggested that peak stress of bottom contact surface can be approximated by simple superposition of peak ones due to squeeze and pressure. Under pressurized condition, sealing performance is dependent on not peak stresses of bottom and side contact surfaces but that of top.