• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2007

The objective of this research is to provide better knowledge on the behavior of strong axis SRC column-RC beam joint, supported by experimental results, that can be broadly applicable to many structures. For this purpose, firstly literature reviews and field survey were made to classify the most commonly used for these types of joints. Then, experimental program was designed and performed including 6 SRC column-RC beam joint specimens designed with various joint details. Using the experimental results obtained from the quasi-static cyclic tests, structural performances of the joints such as hysteretic curves, maximum strength capacities, strength degradation beyond the maximum strength, ductilities, and energy dissipation capacities were investigated. Test results showed that specimens with wide beam shape (RCW-P, RCW-W, RCW-F) and T beam shape (RCT-W) showed better structural performances than the bracket type specimens (HBR-L, HBR-S). These specimens also revealed to have higher strength capacities than the nominal design strength. However, H beam bracket type specimens (HBR-L, HBR-S) need further study both analytically and experimentally to verify the reason for unexpected structural performances.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.406-414
• /
• 2017

An experimental study in a recirculating water channel was carried out to investigate the effect of large coherent structures to the skin friction on a flat plate. Particle Image Velocimetry (PIV) technique was used to quantify characteristic features of coherent structures growing to the boundary layer. In the PIV measurement, it is difficult to calculate the friction velocity near the wall region due to laser deflection and uncertainty so that Clauser fitting method at the logarithmic region was adopted to compute the friction velocity and compared with the one directly measured by the dynamometer. With changing the free-stream velocity from 0.5 m/s to 1.0 m/s, the activity of coherent structures in the logarithmic region was increased over three times in terms of Reynolds stress. The flow field was separated by Variable Interval Time Averaging (VITA) technique into the weak and the strong structure case depending on the existence large coherent structures in order to validate its effectiveness. The stream-wise velocity fluctuation was scanned through at the boundary thickness whether it had a large deviation from background flow. With coherent structures connected from near-wall to the boundary layer, mean wall shear stress was higher than that of weak structure case. Proper Orthogonal Decomposition (POD) analysis was also applied to compare the energy budget between them at each free-stream velocity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.2
• /
• pp.155-159
• /
• 1971

1. Based upon an fertilizer experiment done in a farmer's field, with a medium maturity variety, Jinheung, (in 1969) a method of determination of nitrogen to be additionally given, at tillering and reproductive stages was studied. In this experiment, four kilograms of nitrogen per 0.1 ha was applied as basal dressing to all experimental treatments at transplanting time. 2. The application of nitrogen at the reproductive stage of paddy increased the yield remarkably and cut down the amount of nitrogen to be given at the tillering stage. The yield of paddy, 670kg/0.1 ha obtained by the application of 6.82kg N/0.1 ha at the reproductive stage far exceeded the yield, 644kg/0.1ha obtained when over 8kg N/0.1ha of N is applied at tillering stage alone. This emphasizes the importance of nitrogen top dressing at the reproductive stage. 3. As the amount of nitrogen to be given at both stages, reproductive and tillering, would be the reflection of soil fertility of the field, a correlative study between the amount of nitrogen to be given at both stages and soil analysis is suggested to be undertaken. 4. A study on the relationship between the amount of fertilizer to be given at stages different growth and yield components is suggested to be undertaken for the purpose of establishing a better fertilizer use technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.197-206
• /
• 2004

The ground anchor support system may not be occasionally used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then could play important roles to reduce deformations mainly in the upper part of the nailed-soil excavation system as well as to improve local stability. In this study, a newly modified soil nailing technology named as the PSN (Pretension Soil Nailing), is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the PSN system. Also, proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear, Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretension of the soil nails are examined in detail throughout an illustrative example and the $FLAC^{2D}$ program analysis. And a numerical approach is proposed PSN system using the shear strength reduction technique with the $FLAC^{2D}$ program.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.38-46
• /
• 1999

Canopy structure conductances of a Norway spruce forest in the Solling Hills(Central Germany) and Central Forest Biosphere Reserve(320km to the north-west from Moscow) were derived from LE(latent heat flux) and H(sensible heat flux) fluxes measured(by Eddy correlation technique and energy balance method) and modelled(by one dimensional non-steady-state) SVAT(soil-vegetation-atmosphere-transfer) model(SLODSVAT) using a rearranged Penman-Monteith equation("Big-leaf" approximation) during June 1996. They were compared with canopy stomatal conductances estimated by consecutive intergrating the stomatal conductance of individual needles over the whole canopy("bottom-up" approach) using SLODSVAT model. The result indicate a significant difference between the canopy surface conductances derived from measured and modelled fluxes("top-down" approach) and the stomatal conductances modelled by the SLODSVAT("bottom-up" approach). This difference was influenced by some nonphysiological factors within the forest canopy(e.g. aerodynamic and boundary layer resistances, radiation budget, evapotranspiration from the forest understorey). In general, canopy surface conductances derived from measured and modelled fluxes exceeded canopy stomatal conductance during the whole modelled period, The contribution of the understorey's evapotranspiration to the total forest evapotranspiration was small (up to 5-9% of the total LE flux) and was not depended on total radiation balance of forest canopy. Ignoring contribution of the understorey's evapotranspiration resulted in an overestimation of the canopy surface conductance for a spruce forest up to 2mm/s(about 10-15%).

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2012

For a methanol separation column of the BPA (Bisphenol A) plant, HAZOP (hazard and operability) assessment was performed and damage ranges were predicted from the accident scenarios for the fire and the explosion. As a result, the damage range of the jet fire was 20 m in the case of rupture of the discharge pipe (50 mm diameter) of safety valve, and that of the flash fire was 267 m in the case of catastrophic rupture. Also, the damage ranges of the unconfined vapor cloud explosion (UVCE) for the rupture of the discharge pipe and for the catastrophic rupture were 22 m and 542 m, respectively. For the worst case of release scenarios, safety measures were suggested as follows: the pressure instruments, which can detect abnormal rise of the internal pressure in the methanol separation column, should be installed by the 2 out of 3 voting method in the top section of the column. Through the detection, the instruments should simultaneously shut down the control and the emergency shut-off valves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.1116-1133
• /
• 2016

This study examines the historical background of Goryeo and its relationship with Song and Yuan. In addition, it observes the shape of dress styles for the king, queen, officers, maids in waiting, and commoners after classifying them with a focus on the dress style of normal people appearing in Buddhist paintings. This study then investigates structures by tracing Goryeo's unique identity and its characteristic by a comparison and analysis of dressing style elements of Goryeo with Song and Yuan. The results shows that the Song's system was used exclusively for the dress style of the king and government officers of Goryeo after Goryeo's submission period by Yuan. There were no clear appearances of a Mongol style dress but only changes in head styles of cutting hair around the head and twisting the rest in a top down and long method. In addition, Song's style Bokgeon was shown by the king to his lower level officers. This was because the king and his officers of Yuan were in accordance with Song's system in officer's dress, hat and head style, armor, and horseback riding equipment. Second, there is doubt if they inherited a traditional form and style of the dress rather than followed the dress style of Yuan because the shape of Yuan's basic dress style Deel is very similar to the dress shape of early Buyeo people's Po in the $3^{rd}$ to $4^{th}$ centuries. Third, the shape of the Chaksu and Gung-go had been kept as it was in the dress style of ordinary men, and because the shape of the double collar had already appeared in the period of Samguk, which appeared in all classes of Yuan. There is no reason to adopt double collar shape that appeared. The general Pyeonbokpo of the country had to be influenced by Yuan. Forth, the dress style of queen and her maids in waiting were mentioned in documents; however, there was no shape of a dress like Boktag and Deel in the relics, which are the characteristic of Yuan's woman dress style. Fifth, the shape worn national style Yu and Sang had been kept in an ordinary woman's dress style; however, the two style system of high and lower class in Yuan's ordinary woman dress style appeared newly and is considered an influence of Goryeo.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.11-21
• /
• 2022

All-solid-state batteries are one of the promising candidates for next-generation batteries and are drawing attention as a key component that will lead the future electric vehicle industry. This study analyzes 10,280 comments on Reddit, which is a global social media, in order to identify policy issues and public interest related to all-solid-state batteries from 2016 to 2021. Text mining such as frequency analysis, association rule analysis, and topic modeling, and sentiment analysis are applied to the collected global data to grasp global trends, compare them with the South Korean government's all-solid-state battery development strategy, and suggest policy directions for its national research and development. As a result, the overall sentiment toward all-solid-state battery issues was positive with 50.5% positive and 39.5% negative comments. In addition, as a result of analyzing detailed emotions, it was found that the public had trust and expectation for all-solid-state batteries. However, feelings of concern about unresolved problems coexisted. This study has an academic and practical contribution in that it presented a text mining analysis method for deriving key issues related to all-solid-state batteries, and a more comprehensive trend analysis by employing both a top-down approach based on government policy analysis and a bottom-up approach that analyzes public perception.

• Korean Journal of Environmental Biology
• /
• v.27 no.2
• /
• pp.183-190
• /
• 2009

Characterization of the analysis of forest vegetation, soil environmental conditions and water quality were performed from March 2003 to March 2007. The two basins were characterized by cultivated area (Kaesim reservoir) and mountain area (Jangchan reservoir), and divided into eleven small basins, where dynamics of pollutants, forest vegetation and soil environmental conditions were surveyed. The vegetation can be divided into 10 types by $Z\ddot{u}rich$-Montpellier school's method. Pearson coefficients between vegetation type and water quality were correlated with dissolved oxygen (DO) in the Quercus variabilis community at the 5% level and total phosphorus (TP) in the Larix leptolepis plantation at the 1% level. Especially total phosphorous and total nitrogen increased in small basins where the proportion of cultivated and residential area increased. The analysis of influences of pollutant discharge on water quality showed that pollutant charge was very low in forest land area ($Y_{T-P}$=-0.0017X+0.2215, r=0.16, $Y_{COD}$=- 0.0395X+8.5051 r=0.47). The soil types of western area were comparatively simple, but those of eastern area were complicated with regosols, red-yellow soils, lithosoles, etc. The pH, total solid (TS) and volatile substance (VS) of the forest and agricultural land soils collected in each site were 5.4~6.9, 75.8~80.2%, and 3.80%~5.80%, respectively. According to the analytical result of soil environmental conditions, heavy metal contents fell short to the mean value of natural conditions. Runoff amount (Y) and depth of topsoil (X) were negatively correlated, $Y_{ron}=-1.0088X_{top}+35.378$ (r=0.68). The correlation was much lower in up-stream but much higher in down-stream, because permeation into soil particle was larger on down-stream due to its more or less gentle slope. Pearson coefficients between soil pH and water pH were statistically significant at 1% level.