• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• 대한소아치과학회지
• /
• 제32권3호
• /
• pp.409-415
• /
• 2005

영구 전치의 매복은 제 3 대구치나 견치에 비해서 드물게 나타나지만 학령기 아동에서 관찰할 수 있다. 매복치아의 원인은 외상, 공간 부족, 치아의 맹출 경로상에 위치하는 과잉치, 유치의 치근단 감염 등 다양하다. 매복된 치아는 부정교합과 인접치아의 치근 흡수, 낭종 등의 병적 변화를 유발할 수 있으므로 임상적 검사와 방사선학적 검사를 통해 정확한 위치를 확인하고, 적절한 치료계획을 통해 정상 맹출을 유도하여야 한다. 매복된 치아가 병적 변화를 일으킨 경우나 인접치에 손상을 주었을 경우에 발치를 시행하게 된다. 그러나 교정적 견인을 통해 기능과 심미성을 회복시켜 줄 수 있으므로 조기 발견과 발견시의 올바른 진단과 치료 계획을 수립하는 것이 중요하다. 교정적 견인시에는 매복치를 배열할 공간의 확보와 고정원에 대한 고려가 선행되어야 한다. 견인시 적절한 방향의 힘을 통해서 치근의 흡수 등의 부작용이 일어나지 않도록 해야 한다. 본 증례는 매복된 전치들을 forced eruption을 통해서 정상적인 맹출 방향으로 유도한 치험례이다.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.769-779
• /
• 1995

The understanding the nature of occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have repored contact locations with respect to the tooth position. However, there are few report the variation of the occlusal contact point with change in each head position. This study analysed the number of occlusal contact point with change in each head position. 30 subject(male 17, female 13), who ahad natural occlusion and no symptoms of temporomandibular disorder, were selected. The numbers and patterns of tooth contact were recorded by silicone bite registration on stone model at four different head positions with head anguration gauge(from the supine to the upright position). The results obtained were as follows : 1. The numbers of total occlusal contact point on teeth increased to average 25, 29, 35, 42 points as head angulation was changed from the supine to the upright position against the ala-tragus line, and there was significant difference(P<0.05). 2. In the 19 subject(65%)of total 30 subject, the perforated point of the silicone bite indicated that the locus for the prime contact point moved mesially as the head angulation was changed from the supine to the upright position. 3. On the basis of the fact that the anterior occlusal contact point increase as head angulation changed from the supine to the upright position, we could find that the mandibular position is moved anteriorly.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.549-554
• /
• 1998

저자는 매복된 상악 정중 과잉치를 주소로 내원한 환아를 3차원 전산화 단층촬영술을 이용해 매복된 과잉치의 위치를 파악하였으며 다음의 결론을 얻었다. 1. 인접한 영구치에 대한 위해한 영향을 주지 않기 위해 상악 정중 매복 과잉치의 정확한 위치 판별이 요구된다. 2. 3차원 전산화 단층촬영법은 매복 과잉치의 위치판별에 있어서 객관적인 중요한 정보를 제공한다.

• 대한소아치과학회지
• /
• 제29권4호
• /
• pp.607-617
• /
• 2002

연령과 치아 발육상태 단계와의 상관관계, 치아의 발육에 따른 치아의 이동상태를 평가하기 위하여 최근 5년 이내에 경북대학교 병원에 내원한 아동(남아 446명, 여아 326명)의 파노라마 방사선사진을 대상으로 하여, Moorrees의 기준에 의하여 하악 영구치아의 발육단계를 평가한 후, 발육단계와 연령, 치조골내 치아의 위치를 평가하여 다음과 같은 결론을 얻었다. 치아의 발육시기는 치관이 완료될 때까지 남, 여의 차이가 없었으나, 치근형성이 되면서 부터는 남아보다 여아에서 더 빨리 발육되는 경향을 나타내었다. 치관형성의 완료시점의 평균연령은 남아 여아 각각에서 중절치 3.71, 4.05세, 측절치 4.44, 4.60세, 견치 5.35, 5.11세, 제1소구치 6.62, 6.36세, 제2소구치 7.36, 7.17세, 제1대구치 3.51, 3.69세, 제2대구치 7.90, 7.64세 이었고, 치근단이 폐쇄되기 전단계인 $A_{1/2}$는 중절치 8.70, 8.18세, 측절치 9.55, 8.99세, 견치 12.48, 11.60세, 제1소구치 12.30, 12.01세, 제2소구치 12.19, 12.26세, 제1대구치 912, 8.87세, 제2대구치 12.59, 12.45세 이었다. 치조골내의 교두점 위치는 치관형성 완료시까지는 거의 변화가 없었으나, 치근이 형성됨에 따라 빠르게 교합평면을 향해 이동하였고, 치근형성 완료단계(Rc)에서 다시 움직임 없이 정체되었다. 치근단의 위치는 치관형성 시작부터 치근 1/4 형성 시까지 일정한 위치에 유지되었으나, 그 후에 급격하게 교합면 쪽으로 이동하였고, 치근 3/4 형성시점부터 비교적 일정한 위치에 유지되었다. 치아의 석회화가 시작되는 초기의 치배 위치는 견치가 가장 하방에 위치하였으며, 그 다음이 제2소구치, 제1소구치, 측절치 제2대구치, 제1대구치 순이었고, 중절치가 가장 상방에 위치하였다.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.43-61
• /
• 1990

The laser reflexion method is a new technique which permits precise contactless measurement and observation of tooth mobility as well as tooth movement. The purposes of this study were to clarify the reliability of the laser reflexion method in clinical application and to measure the abutment tooth movement according to clasp design. This study was designed to determine 1) How much a bending movement of the impression plate stand affects the position of the reflexion pattern and how precise the patient bites into plate 2) Which clasp design causes greater movement of the abutment tooth. Under medium and maximum bite forces, tests were performed on central loading position which was 13mm distal to terminal abutment tooth of distal extension removable partial denture. The movement in the mesiodistal and buccolingual directions was measured. The Duncan's New Multiple-Range test was used to compare the means for the four castings under each direction-load combination; and the paired sample t-test was for medium and maximum bite forces. From this experiment, the following results were obtained. 1. The Roach clasp, the combination clasp, the RPI clasp, and the Akers clasp did not significantly differ in their effects on buccolingual movement of the abutment tooth. 2. The direction of abutment tooth movement was not significantly altered by clasp design and all abutment tooth movements were oriented distobuccally. 3. Under medium bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the combination clasp and the RPI clasp. Under maximum bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the RPI clasp. 4. The testing apparatus and procedures used in this study(laser reflexion method) proved to be reliable in clinical application.

• Imaging Science in Dentistry
• /
• 제35권1호
• /
• pp.25-31
• /
• 2005

Purpose : To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Materials and Methods : Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occlusion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. Results : With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. Conclusion : It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

• Journal of Periodontal and Implant Science
• /
• 제50권3호
• /
• pp.146-158
• /
• 2020

Purpose: The aim of this study was to investigate and identify the main causes of periodontal tissue change associated with labial gingival recession by examining the anterior region of patients who underwent orthodontic treatment. Methods: In total, 45 patients who had undergone orthodontic treatment from January 2010 to December 2015 were included. Before and after the orthodontic treatment, sectioned images from 3-dimensional digital model scanning and cone-beam computed tomography images in the same region were superimposed to measure periodontal parameters. The initial labial gingival thickness (IGT) and the initial labial alveolar bone thickness (IBT) were measured at 4 mm below the cementoenamel junction (CEJ), and the change of the labial gingival margin was defined as the change of the distance from the CEJ to the gingival margin. Additionally, the jaw, tooth position, tooth inclination, tooth rotation, and history of orthognathic surgery were investigated to determine the various factors that could have affected anterior periodontal tissue changes. Results: The mean IGT and IBT were 0.77±0.29 mm and 0.77±0.32 mm, respectively. The mean gingival recession was 0.14±0.57 mm. Tooth inclination had a significant association with gingival recession, and as tooth inclination increased labially, gingival recession increased by approximately 0.2 mm per 1°. Conclusions: In conclusion, the IGT, IBT, tooth position, tooth rotation, and history of orthognathic surgery did not affect labial gingival recession. However, tooth inclination showed a significant association with labial gingival recession of the anterior teeth after orthodontic treatment.

• Journal of Periodontal and Implant Science
• /
• 제32권1호
• /
• pp.51-59
• /
• 2002

The aim of the present study was to investigate the distribution of periodontally hopeless teeth in patients who had not been treated. Five hundred nineteen teeth of 163 patients who had visited at the Department of Periodontology, Chonbuk National University Hospital during the period from January 1999 to July 2001 were selected as a periodontally hopeless tooth. Selection criteria were as follows: 1) probing pocket depth more than 8mm, 2) tooth mobility of degree III, 3) radiographic bone loss more than 75%. The contralateral tooth to a hopeless tooth (experimental tooth) was designated as a control tooth. Between the experimental and control tooth, differences in probing pocket depth, tooth mobility and amount of radiographic bone loss were examined as well as correlation. The results showed that hopeless teeth were most frequently found in the maxillary first molar position and least frequently in the maxillary canine position. Differences between experimental and control teeth were 2mm in probing depth, 1 degree in tooth mobility, and 20% in amount of bone loss (p<0.01). The periodontal conditions between the experimental and control teeth showed correlation in general, however, statistical significances were found in posterior teeth positions. Within limitations of this study, it can be concluded that local factors may play a role in deterioration of periodontal disease along with symmetrical character of periodontal disease.

• Imaging Science in Dentistry
• /
• 제53권4호
• /
• pp.303-312
• /
• 2023

Purpose: This study investigated the prevalence of developmental and acquired pathologic conditions associated with impacted third molars (3Ms) in a Southern Brazilian population and evaluated whether demographic and tooth characteristics were correlated with the presence of bone or tooth lesions. Materials and Methods: Panoramic radiographs were assessed for developmental (bone-related) or acquired (tooth-related) pathoses associated with impacted upper or lower 3Ms. Data on tooth positioning, tooth development, and patient demographics were collected. A trained, calibrated postgraduate student evaluated all images. Binary and multivariate logistic regression models were used to assess associations between outcomes and the demographic and radiographic variables. The threshold for statistical significance was set at 5% (P<0.05). Results: The sample comprised panoramic radiographs from 2054 patients, predominantly female (59.2%), with a mean age of 27.2±11.5 years. Overall, 4066 impacted 3Ms were evaluated, revealing 471 (11.6%) developmental and 710 (17.5%) acquired pathoses. Among the developmental pathoses, 460 (95.2%) were indicative of dentigerous cysts. Male sex, lower 3M location, vertical or distoangular positioning, and incomplete root formation were associated with an elevated likelihood of developmental pathology. Lower tooth position, complete root formation, and partial eruption were linked to an increased probability of an acquired pathology in the third or second molar. Conclusion: The prevalence of pathologic conditions associated with impacted 3Ms was low. Male sex, lower 3M placement, horizontal or distoangular positioning, and incomplete root formation were associated with developmental pathoses, while lower tooth position, complete root formation, and partial eruption were related to acquired pathoses.