• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.409-415
• /
• 2005

Impaction of permanent incisor occurs rare than the canine & third molar. But it's often observed in school age child. The causes of impaction are trauma, space deficiency, mesiodens, infections of root apex, etc. In spite of elimination of cause, normal eruption of impacted tooth is rare. Though eruption is normal, the position of tooth will be incorrect. Because the impacted tooth results in malocclusion, root resorption of adjacent tooth, pathologic cystic change, it should be confirmed the precise position by clinical and radiographic exam and found the correct location by appropriate treatment plan. In case of pathologic change of impacted tooth and injury to adjacent tooth, it will be extracted. But through orthodontic retraction, the function and esthetics of tooth can be restored. It is important that impacted tooth should be detected early and diagnosed correctly, and appropriate treatment plan should be made. Before impacted tooth is retracted, the considerations of space for alignment and anchorage should be preceded and through appropriate force and mechanics, the side effects, for example, a root resorption should be minimized. In this study, we guided impacted tooth to normal position by using a forced eruption.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.769-779
• /
• 1995

The understanding the nature of occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have repored contact locations with respect to the tooth position. However, there are few report the variation of the occlusal contact point with change in each head position. This study analysed the number of occlusal contact point with change in each head position. 30 subject(male 17, female 13), who ahad natural occlusion and no symptoms of temporomandibular disorder, were selected. The numbers and patterns of tooth contact were recorded by silicone bite registration on stone model at four different head positions with head anguration gauge(from the supine to the upright position). The results obtained were as follows : 1. The numbers of total occlusal contact point on teeth increased to average 25, 29, 35, 42 points as head angulation was changed from the supine to the upright position against the ala-tragus line, and there was significant difference(P<0.05). 2. In the 19 subject(65%)of total 30 subject, the perforated point of the silicone bite indicated that the locus for the prime contact point moved mesially as the head angulation was changed from the supine to the upright position. 3. On the basis of the fact that the anterior occlusal contact point increase as head angulation changed from the supine to the upright position, we could find that the mandibular position is moved anteriorly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.549-554
• /
• 1998

The prevalence of the supernumerary tooth is $1{\sim}4%$. It usually occurs in the permanent dentition. It frequently occurs in the maxillary mid palatal area. The presence of the supernumerary tooth causes the following problems ; (1) interfering the eruption of successional tooth, (2) displacing the neighboring teeth, (3) resulting large diastema, (4) forming cystic change. So the supernumerary tooth should be removed as soon as possible. To extract the supernumerary tooth, the exact position must be noticed first. Radiographic techniques that were used in the past are tube shift technique, right angle technique, sterioradiography, using radiopaque contrast media and conventional tomography. But these methods include the subjective opinion of the operator. So, a technique eliminating the operator's opinion and showing the position 3-dimentionally can be used. 3-dimentional computed tomography equipped with dental softwares can show the position of the impacted supernumerally tooth in 3-dimentional position. It has an advantage to eliminate the subjective opinion of the operator. With a fast computer this techenique is done in a relatively short period of time. The rationale of this methods is relatively simple. After tacking X-ray and reconstructing the data 3-dimentionally, sequential removal of the soft tissue and hard tissue(bone) CT number leaves the teeth alone in 3-dimentional position. The image can be seen from anywhere, so the operator can see the image in front, rear, upper, and lower positions. In both cases 1 and 2, the position of the impacted supernumerary tooth is viewed by the 3-dimensional computed tomography. And it made the operator easy to figureout the exact position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.607-617
• /
• 2002

The purposes of this study were to evaluate the timing of tooth calcification and the change of tooth position with tooth developmental stage on the mandibular teeth. Seven hundred seventy two children(male:446, female:326), 3 to 12 years of age were examined radiographically with panoramic film. Dental development was determined by inspecting radiographs and assigning a rating according to consecutive stages defined by Moorrees, and tooth cusp position and root terminus position were measured from the lower border of mandibular body and calculated the position index to evaluate the movement of tooth with developmental stage. The results were as follows. 1. There were no significant differences between boys and girls in the timing of calcification until crown completion, but timing of calcification tend to be faster in girls than in boys after root initiation stage. 2. In terms of mean age, crown completion of central incisor in boys and girls occurred at the age of 3.71, 4.05 years, at 4.44, 4.60 years for the lateral incisor, at 5.35, 5.11 years for the canine, at 6.62, 6.36 years for the first premolar, at 7.36, 7.17 years of second premolar, at 3.51, 3.69 years of first molar, and at 7.90, 7.64 years for the second molar respectively. Apex 1/2 closed stage of central incisor occurred at the age of 8.70 in boys, 8.18 in girls, at 9.55, 8.99 years for the lateral incisor, at 12.48, 11.60 years for the canine, at 12.30, 12.01 years for the first premolar, at 12.19, 12.26 years of second premolar, at 9.12, 8.87 years of first molar, and at 12.59, 12.45 years for the second molar respectively. 3. There was no noticeable movement of cusp tip until crown completion (Crc), but showed rapid movement toward occlusion plane after root initiation(Ri) and again maintain stable position after root completion stage(Rc). 4. Root terminus position was stable until root 1/4 formation stage(R1/4), followed by rapid movement toward occlusal plane and was stable again after root 3/4 formation stage(R3/4). 5. Developmental stage at the time of alveolar bone penetration by cusp tip varied with each of the permanent teeth. 6. Canine tooth follicle was at the lowest position in the mandibular body during the early stage of calcification, followed by second premolar, first premolar, lateral incisor, second molar, first molar and central incisor in order.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.43-61
• /
• 1990

The laser reflexion method is a new technique which permits precise contactless measurement and observation of tooth mobility as well as tooth movement. The purposes of this study were to clarify the reliability of the laser reflexion method in clinical application and to measure the abutment tooth movement according to clasp design. This study was designed to determine 1) How much a bending movement of the impression plate stand affects the position of the reflexion pattern and how precise the patient bites into plate 2) Which clasp design causes greater movement of the abutment tooth. Under medium and maximum bite forces, tests were performed on central loading position which was 13mm distal to terminal abutment tooth of distal extension removable partial denture. The movement in the mesiodistal and buccolingual directions was measured. The Duncan's New Multiple-Range test was used to compare the means for the four castings under each direction-load combination; and the paired sample t-test was for medium and maximum bite forces. From this experiment, the following results were obtained. 1. The Roach clasp, the combination clasp, the RPI clasp, and the Akers clasp did not significantly differ in their effects on buccolingual movement of the abutment tooth. 2. The direction of abutment tooth movement was not significantly altered by clasp design and all abutment tooth movements were oriented distobuccally. 3. Under medium bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the combination clasp and the RPI clasp. Under maximum bite force, the Akers clasp caused greater distal movement of the abutment tooth than did the RPI clasp. 4. The testing apparatus and procedures used in this study(laser reflexion method) proved to be reliable in clinical application.

• Imaging Science in Dentistry
• /
• v.35 no.1
• /
• pp.25-31
• /
• 2005

Purpose : To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Materials and Methods : Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occlusion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. Results : With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. Conclusion : It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

• Journal of Periodontal and Implant Science
• /
• v.50 no.3
• /
• pp.146-158
• /
• 2020

Purpose: The aim of this study was to investigate and identify the main causes of periodontal tissue change associated with labial gingival recession by examining the anterior region of patients who underwent orthodontic treatment. Methods: In total, 45 patients who had undergone orthodontic treatment from January 2010 to December 2015 were included. Before and after the orthodontic treatment, sectioned images from 3-dimensional digital model scanning and cone-beam computed tomography images in the same region were superimposed to measure periodontal parameters. The initial labial gingival thickness (IGT) and the initial labial alveolar bone thickness (IBT) were measured at 4 mm below the cementoenamel junction (CEJ), and the change of the labial gingival margin was defined as the change of the distance from the CEJ to the gingival margin. Additionally, the jaw, tooth position, tooth inclination, tooth rotation, and history of orthognathic surgery were investigated to determine the various factors that could have affected anterior periodontal tissue changes. Results: The mean IGT and IBT were 0.77±0.29 mm and 0.77±0.32 mm, respectively. The mean gingival recession was 0.14±0.57 mm. Tooth inclination had a significant association with gingival recession, and as tooth inclination increased labially, gingival recession increased by approximately 0.2 mm per 1°. Conclusions: In conclusion, the IGT, IBT, tooth position, tooth rotation, and history of orthognathic surgery did not affect labial gingival recession. However, tooth inclination showed a significant association with labial gingival recession of the anterior teeth after orthodontic treatment.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.51-59
• /
• 2002

The aim of the present study was to investigate the distribution of periodontally hopeless teeth in patients who had not been treated. Five hundred nineteen teeth of 163 patients who had visited at the Department of Periodontology, Chonbuk National University Hospital during the period from January 1999 to July 2001 were selected as a periodontally hopeless tooth. Selection criteria were as follows: 1) probing pocket depth more than 8mm, 2) tooth mobility of degree III, 3) radiographic bone loss more than 75%. The contralateral tooth to a hopeless tooth (experimental tooth) was designated as a control tooth. Between the experimental and control tooth, differences in probing pocket depth, tooth mobility and amount of radiographic bone loss were examined as well as correlation. The results showed that hopeless teeth were most frequently found in the maxillary first molar position and least frequently in the maxillary canine position. Differences between experimental and control teeth were 2mm in probing depth, 1 degree in tooth mobility, and 20% in amount of bone loss (p<0.01). The periodontal conditions between the experimental and control teeth showed correlation in general, however, statistical significances were found in posterior teeth positions. Within limitations of this study, it can be concluded that local factors may play a role in deterioration of periodontal disease along with symmetrical character of periodontal disease.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.303-312
• /
• 2023

Purpose: This study investigated the prevalence of developmental and acquired pathologic conditions associated with impacted third molars (3Ms) in a Southern Brazilian population and evaluated whether demographic and tooth characteristics were correlated with the presence of bone or tooth lesions. Materials and Methods: Panoramic radiographs were assessed for developmental (bone-related) or acquired (tooth-related) pathoses associated with impacted upper or lower 3Ms. Data on tooth positioning, tooth development, and patient demographics were collected. A trained, calibrated postgraduate student evaluated all images. Binary and multivariate logistic regression models were used to assess associations between outcomes and the demographic and radiographic variables. The threshold for statistical significance was set at 5% (P<0.05). Results: The sample comprised panoramic radiographs from 2054 patients, predominantly female (59.2%), with a mean age of 27.2±11.5 years. Overall, 4066 impacted 3Ms were evaluated, revealing 471 (11.6%) developmental and 710 (17.5%) acquired pathoses. Among the developmental pathoses, 460 (95.2%) were indicative of dentigerous cysts. Male sex, lower 3M location, vertical or distoangular positioning, and incomplete root formation were associated with an elevated likelihood of developmental pathology. Lower tooth position, complete root formation, and partial eruption were linked to an increased probability of an acquired pathology in the third or second molar. Conclusion: The prevalence of pathologic conditions associated with impacted 3Ms was low. Male sex, lower 3M placement, horizontal or distoangular positioning, and incomplete root formation were associated with developmental pathoses, while lower tooth position, complete root formation, and partial eruption were related to acquired pathoses.