• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.732-743
• /
• 1995

The purpose of this study was to evaluate the adaptation of light cured dentin bonding agents to tooth structure by measuring contraction gaps on interfaces between cavity wall and composite resin under SEM study. In this study, class V cavities with cementum margin were prepared on the buccal surfaces of 15 extracted human premolar teeth and teeth were randomly assigned 3 groups of 5 teeth each. The cavities were filled with three dentin bonding agents and two composite resins were investigated for this study: three dentin bonding agents; Scotchbond 2, Scotchbond Multi-Purpose. All-Bond 2, two composite resins; Silux Pius, Z-100. Group 1 : Scotchbond 2 + Silux Plus Group 2 : Scotchbond Multi~Purpose + Z-100 Group 3 : All-Bond 2 + Z-100 The restored teeth were stored in 100% relative humidity at $37^{\circ}C$ for 7 days. And then, the roots of the teeth were removed with the tapered fissure bur and the remaining crowns were sectioned occlusogingivally through the center of restorations. Adaptation at tooth-restoration interface was assesed occlusally, gingivally, and axially by scanning electron microscope. The results were as follows : 1. In Group 1, the adaptation to dentinal wall of Scotchbond 2 was poor, but the adaptation to enamel wall of Scotchbond 2 was excellent. 2. In Group 2, the adaptation to occlusal was axial wall and gingival wall of Scotchbond Multi-Purpose was excellent. Especially in axially wall, the dentin bonding agents infiltrated into dentinal tubules and there was excellent adaptation to dentinal wall. 3. In Group 3, the adaptation to occlusal wall and axial wall of All-Bond 2 was excellent. But in gingival wall, there was gap formation between composite resin and dentin bonding agent.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.489-504
• /
• 1996

The purpose of this study was to compare the adaptation to the tooth structure of five light cured glass ionomer cements (Fuji II LC. VariGlass VLC, Vitremer, Dyract and Geristore). Human, non-carious fifty extracted permanent premolars stored in normal saline were used. Class V cavity preparations were created on the buccal surfaces. The occlusal margin of each cavity was placed on the enamel and the gingival margin was placed on the cementum/dentin. The teeth were then distributed at random into five groups of 10 teeth each. Group 1: Fuji II LC, Group 2 : VariGlass VLC, Group 3 : Vitremer, Group 4: Dyract, Group 5 : Geristore. The prepared cavities were restored with one of the five light cured glass ionomer cements. The manipulation of each material was handled according to the manufacturer's instructions. All samples were placed in incubator of 100% relative humidity at $37^{\circ}C$ for 24 hours. The roots of the teeth were removed with the tapered fissure bur and the remaining crowns were sectioned buccolingually through the center of restorations. The cut interfaces were gradually hand polished on sandpapers from 300 up to 1200 grit. The adaptation at the tooth/cements interface was assessed by SEM (JSM-840A, JEOL Ltd.). The results of this study were as follows : 1. Group 2 revealed the best adaptation and groups 1, 4 and 5 revealed similar adaptation pattern to the cavity walls. Group 3 revealed the worst adaptation to the cavity walls. 2. Enamel margins showed better adaptation than dentin/cementum margins with each material except group 3. 3. The hybrid layers were observed between the glass ionomer cement and dentin in groups 2, 4 and 5.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.3 no.2
• /
• pp.87-90
• /
• 2007

It's important that detect early caries of deciduous and permanent teeth to prevent dental caries and prevserve teeth, especially on proximal surface of deciduous teeth. The reason is that their prominent pulp horn lead to pulp treatment easily due to rapid caries progression. There are conventional exploring, visual inspection and radiographic exam for early caries detection. But, the standard method for diagnosing dental caries is subject and cavitation may be accelerated during exploring procedure. Caries can be diagnosed up to 40% mineral loss with radiograph. $DIFOTI^{(R)}$ (Digital Imaging Fiber-Optic TransIllumination) is diagnostic imaging system for early caries detection using fiber-optic illumination. It is possible that remineralize the tooth surface without tooth preparation and conserve the tooth structure by using $DIFOTI^{(R)}$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1983

With electron microscope, author studied on the pulp structure of human primary tooth in shedding stage. Non-carious human primary molar teeth were selected for this study. Using standard methods, specimens were sectioned and examined by light and electron microscope, The results were as follows; 1. In coronal pulp, odontoblasts were replaced by multinucleated odontoclasts, which contained a large number of mitochondria of varying shape and vacuoles in cytoplasm. Where odontoclasts were in contact with tooth surface, the characteristic ruffled border and clear zone were observed. 2. Fibrous tissue with plentiful collagen fibers and fibroblasts was observed adjacent to the dentin in the pulp. Fibroblast contained a number of mitochondria and well-developed rough-surfaced endoplasmic reticulum. 3. Inflammatory cells were observed in the pulp and active fibroblasts could be seen between inflammatory cells. In many cases, cervical epithelium proliferated toward absorbed area. 4. Inflammatory cells consisted of a number of lymphocytes, polymorphonuclear leukocytes, plasma cells and macrophages. Macrophage containing lysosomes in digestive state or phagocyting PMN could be seen. 5. In the primary molar of delayed root resorption, odontoblast layer, zone of Weil and cell-rich zone could be seen at roof of pulp chamber and odontoblast in this area cont과ained some lipid droplets.

• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.712-722
• /
• 2001

The purpose of this study is to classify of the Hair ornaments in old tombs of the Three Kingdom States. Hair ornaments was divided into Combs, Rod-like hairpins, Chae[;釵], Boyo[;步搖] Combs were 2 type in according to the tooth's space, wide-tooth comb[;梳] and fine-tooth comb(;比). The general name of two type was called Jeul(;櫛). Combs were excavated from the only ancient Silla tombs. Rod-like hairpins were called Gha(叉) or Jam(:簪). They were found in most of the old tombs in Goauryeo, Baekje, ancient Silla tombs. The style was L-type and embellished circular head-type. Chae(;釵) was understand Cha(:叉) that had two tongs. Chae(:釵) was generally U-type and rarely hairtweezers -type. Jakchae(;爵釵) was understand distinctive Chae(;釵) hanged with phoenix. This type was excavated from the only Baekje tombs of King of Muryeong. Boyo(;步搖) was originally a hair decoration of the northern nomadic tribes which had been introduced to the Wijin period. Boyo gained its popularity by the women in Dang Dynasty, hair ornaments were considered indicators of status and wealth. Boyo(;步搖) hair accessory features of which are suspended from a elaborate hairpin structure. Such pieces were designed to sway as their wearer walked. The bequest was not found, but we catch the Boyo(; 步搖) that was women'head decoration in painting of old tombs in Goguryeo.

• The Journal of the Korean dental association
• /
• v.51 no.11
• /
• pp.595-603
• /
• 2013

The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction and the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. We know well that a vital abutment is easier than a non-vital one to get the targeted goals for clinical success in connection with esthetics and structure. The creation of "Post and Core" with bonding technique is a decisive factor for a long-term success if the abutment is non-vital tooth with dentinal collapse. I would like to share my clinical experience about "post & core build-up and all-ceramic restoration bonding" out of several success strategies of all-ceramic crown with this presentation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.4
• /
• pp.313-320
• /
• 2002

The purpose of the present study was to evaluate the marginal discrepancy and topography of artificial crown on teeth extracted due to severe periodontal disease. Twenty specimens were invested into metamethylacrylate resin and cutted into vertical slices along with the long axis of tooth. The selected marginal discrepancy between the outer edge of the crown and the finishing line of abutment was examined by stereo- microscope(Olympus, PM-VSP-3, Japan) at magnification of up to 10, and the topography of finishing margin on crown was observed by stereomicroscopeat magnification of up to $70{\times}$. The results were as follows. (1) The mean marginal discrepancy between extracted tooth and artificial crown were $50.82{\mu}m$. (2) There was a considerable difference in the microstructure of finishing margins among specimens. Microscopic Structure on finishing margin showed indefinite line, poor fit (open, underextended and overextended), distorted margin, and surface roughness. This study suggested that there could be necessary to consider the response of periodontium to the emergence profile of natural tooth and precision of marginal geometry while establishing treatment planning for the reconsruction of the artificial crown.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.133-140
• /
• 2017

Split magnetic fluid sealing is a combination of magnetic fluid rotary and plane sealing. Using the theory of equivalent magnetic circuit design as basis, the author theorized the pressure resistance performance of magnetic fluid plane sealing. To determine the pressure resistance of magnetic fluid plane sealing, the author adopted the method of finite element analysis to calculate the magnetic field intensity in the gap between plane sealing structures. The author also analyzed the effect of different sealing gaps, as well as different ratios between the sealing gap and tooth and solt width, on the sealing performance of split magnetic fluid. Results showed that the wider the sealing gap, the lower the sealing performance. Tooth width strongly affects sealing performance; the sealing performance is best when the ratio between tooth width and sealing gap is 2, whereas the sealing performance is poor when the ratio is over 8. The sealing performance is best when the ratio between the solt width and sealing gap is 4, indicating a slight effect on sealing performance when the ratio between the solt width and sealing gap is higher. Theoretical analysis and simulation results provide reference for the performance evaluation of different sealing equipment and estimation of critical pressure at interface failure.

• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2001

Dental Caries which has high prevalence rate, accounts for majority of dental diseases. Many treatment and preventive treatment has been developed, thereby reducing the prevalence rate, but in our country, fluoridization has not spread widely yet, so prevention has not been done satisfactorily. When dental caries progresses, irreversible damage of tooth structure occurs. In initial dental caries, demineralizing tooth structure can be remineralized, so restorative treatment is unnecessary. In this study, 20 teeth restored with composite resin without fluoride release were used and divided into two groups. Incipient dental caries were artificially made and demineralization procedure was done for 1 and 2 weeks, for each group. Changes in mineral contents around the margins were analysed with confocal laser scanning microscope. The results were as follow. 1. Both total fluorescence of the lesion and average fluorescence of the lesion of remineralized samples decreased compared to demineralizing state. (p＜0.01) 2. Confocal laser scanning microscopy can be used in quantitative analysis of mineral change. In result, confocal laser scanning microscopy can be used in quantitative analysis of mineral change and it could be used in many different fields of dentistry in the future.