• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.8-15
• /
• 2002

This paper proposes a case study to treat planning and scheduling in factory of supply chain. In fact, the planning and the scheduling of a factory are not easily solved because of constraints of facility resources, material requirements, allowed planning times, and so on. However many packages are developed by vendors in Advanced Planning and Scheduling(APS) aspects to solve these problems. Therefore, in this paper, we analyze problems of an electronic company and apply the tool, Factory Planner(FP), to solve problems. The FP, which was developed by if technologies, is very popular planning and scheduling tool in the world. Also, the tool is successfully applied to many fields.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.265-272
• /
• 2015

The competition between companies for prior occupation of the market is becoming fierce. In this highly competitive situation, it is important for companies to differentiate themselves if they are going to have a chance at success. And the competition to create the best solution method possible is higher than ever. Increased competition is forcing companies to lower costs and improve efficiency. A supply chain management(SCM) has become one of the most important solution methods of competitive advantage. This study has developed a simulator for the supply chain network problem. The simulator is designed to simulate the conditions of an actual supply chain network considering uncertainties. The simulator developed using commercial simulation tool ARENA and the results of computational experiments for a simple example were given and discussed to validate the developed simulator. Further research is needed, but using the simulator could become a useful tool for decision making in the supply chain network area.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.34-42
• /
• 2004

A new polishing technique for three dimensional micro/meso-scale parts is suggested using a micro quill and a magnetic chain structure. The principle of this method is to polish the target surface with the collected magnetic brushes at a micro tool by the non-uniform magnetic field generated around the tool. In a typical magnetic abrasive finishing process magnetic particles and abrasive particles are unbonded each other. But, to finish the three dimensional small parts bonded magnetic abrasive have to be used. Bonded magnetic abrasives are made from direct bonding, and their polishing characteristics are also examined. Alumina, silicon carbide and diamond micro powders are used as abrasives. Base metal matrix is carbonyl iron powder. It is found that bonded magnetic abrasives are superior to unbonded one by experiment. finally, the polished surface roughness is evaluated by atomic force microscope.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.909-916
• /
• 2021

The purpose of the research to analyze SMEs' technological innovation performance in the Special Region of Yogyakarta based on green supply chains. This study's technology innovation performance is influenced by environmental management practices, green supply chain integration, and supply chain knowledge-sharing. This research is important because many SMEs are underdeveloped in terms of technology innovation performance. Technology innovation performance shows that innovation has a multi-dimensional ecological performance in organizations. Therefore, SMEs' sustainable supply chain could be achieved by managing operations, support, and information by focusing on environmental and social issues to maximize the entire chain. This study used primary data. The number of respondents in this study was 200 SMEs that have implemented green supply chain management practices. The data collection method used was a questionnaire. The data analysis technique tool used is a two-step approach to SEM-AMOS. The results of this study indicate that SMEs are willing to implement a green supply chain to increase their performance. The technological innovation performance model of this study is acceptable. The findings of this research suggest that companies must be encouraged to maintain and increase the implementation of green supply chain integration and better supply chain knowledge-sharing with improved technological innovation performance enhancements.

• 생약학회지
• /
• 제10권2호
• /
• pp.55-59
• /
• 1979

Mass spectra of the dammarane triterpenes having open side chain and $C_{20}-C_{25}-epoxy$ side chain were measured. Principal fragment ions were assigned and plausible mechanisms for the formation of the fragment ions were proposed. In general, the triter-penoids of $C_{20}-C_{25}-epoxy$ side chain. produce $h_{1}-species$ fragment ions by the deletion of side chain at $C_{20}-C_{22}$ bond and open side chain triterpenoids produce $h_{2}$ species fragmentions whose mass numbers are higher by two mass unit than those of $h_{1}$ species. The mass number of h species fragment ions will serve as the diagnostic tool for the elucidation of side chain structure of tetracyclic triterpenoids.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.425-434
• /
• 2001

In this paper we introduce a general framework for the modeling, analysis and costing of logistic networks including supply chains (SCs). The employed modeling notation, the so-called Process Chain paradigm, is specifically developed for the application field of logistic networks which includes SCs. We view SCs as discrete event dynamic systems (DEDS) and apply corresponding simulative techniques in order to derive performance measures of the Process Chain model under investigation. For this purpose Process Chain models are automatically transformed into the input language of the simulation tool HIT. Subsequently, a cost accounting model using the performance measures is applied to obtain costs which are actually subject of interest. The usefulness and applicability of the approach is illustrated by a typical supply chain example. We investigate the impact of an additional SC channel between a manufacturer and web-consumers on the overall supply chain costs.

• 한국컴퓨터정보학회논문지
• /
• 제16권12호
• /
• pp.1-10
• /
• 2011

내장형 시스템의요구사항이 복잡해짐에 따라 내장형 소프트웨어의 신뢰도를분석하기 위한 도구가 요구되고있다. 소프트웨어의 신뢰도를 분석하는 방법으로는 확률적 모델링을 이용하는데, 다수의 디바이스를 제어하는 내장형 소프트웨어에 적용하기 위해서는 내장형 소프트웨어에 특성화 시킬 필요가 있다. 또한, 기존의 신뢰도 분석 도구는 각 상태간의 전이 확률을 다른 방법으로 측정해야 하고, 한 번 작성한 모델에 대해 재사용을 고려하고 있지 않는다. 본 논문은 내장형 소프트웨어의 신뢰도를 분석하기 위해 내장형 소프트웨어 마르코프 체인 모델과 단위 테스팅 도구를 이용한 신뢰도 분석 도구를 제안한다. 내장형 소프트웨어 마르코프 체인 모델은 신뢰도 분석 방법으로 많이 사용되고 있는 마르코프 체인 모델을 내장형 소프트웨어에 특성화 시킨 모델이다. 그리고 단위 테스팅 도구는 내장형 소프트웨어의 개발환경에 적합한 호스트/타겟 구조를 가지고 있다. 제안하는 도구는 신뢰도 분석을 위해 단위간 전이 확률을 단위 테스트 결과로부터 자동으로 측정하여 기존의 도구보다 용이하게 신뢰도를 분석할 수 있다. 그리고 소프트웨어 모델을 XML 기반의 문서로 표현하여 단위 테스팅 도구가 업데이트 시킨 테스트 결과를 바로 적용할수 있고, 웹 기반의 인터페이스와 SVN 저장소를 이용하여 다수의 개발자가 쉽게 접근할 수 있는 장점을 갖는다. 본 논문에서는 예제를 이용하여 신뢰도의 분석을 보이고 신뢰도 측정에 유용함을 보인다.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.300-304
• /
• 2011

This paper proposes an approach to generate tool-path for laser pattern machining. Considering the mechanical structure of a laser pattern machine, it is quite similar to that of a 2D milling machine. Based on the observation, one may try to utilize the tool-path generation methodologies of 2D milling for the laser pattern machining. However, it is not possible to generate tool-path without considering the technological requirements of laser pattern machining which are different from those of 2D milling. In this paper, we identify the technological requirement of laser pattern machining, and propose a proper tool-path generation methodology to satisfy the technological requirements. For the efficient generation of tool-path, this paper proposes a tool-path element computation method, which is based on the concept of a monotone chain.

• 유통과학연구
• /
• 제21권5호
• /
• pp.83-91
• /
• 2023

Purpose: Increasing their motivation and job satisfaction, employees in the distribution channel may be better able to interact with consumers and provide a more satisfying experience. Thus, increasing employee engagement in the supply chain necessitates a complex strategy considering the distinctive features of wholesale and retail markets. This study investigates how to boost employees' motivation in the supply chain based on the difference between wholesale and retail market. Research design, data, and methodology: The prior study analysis is a useful tool to take a look at relevant previous works via a significant screening and selecting strategy. The Key words based on the topic of the research have used, such as 'Employee Motivation', 'Supply Chain', 'Wholesale' and 'Retail' worker. Results: The findings of this research strongly indicates that motivating employees is essential for the efficient operation of supply chain activities as they continue to expand and become more complicated. The supply chain's two main segments are the wholesale and retail markets, each with distinct characteristics. Conclusions: This research focused exclusively on the factors that motivate supply chain workers, ignoring job satisfaction, corporate culture, and managerial style, which may affect employee motivation. These factors also have the potential to impact employee motivation and should be considered in subsequent research.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.187-192
• /
• 1993

Thermal deformation causes large amount of machine tool errors. In order to compensate for thermal and geometric errors of the machine tool an off-line geometric adaptive control (GAC) scheme was developed. THe GAC method was realized by using a measuring plate made of precision spheres. Error vectors and volumetric errors were measured by the measuring plate. Error compensation models were obtained from error vectors and a kinematic chain of machine tools. Reliability of the GAC system of thermal and geometric errors were confrimed by large amount of experiments.