• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.162-169
• /
• 2009

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

• Nuclear Engineering and Technology
• /
• v.45 no.2
• /
• pp.257-264
• /
• 2013

In Canada Deuterium Uranium (CANDU)-type nuclear power plants, the reactor is composed of 380 fuel channels and refueling is performed on one or two channels per day. At the time of refueling, the fluid force of the cooling water inside the channel is exploited. New fuel added upstream of the fuel channel is moved downstream by the fluid force of the cooling water, and the used fuel is pushed out. Through this process, refueling is completed. Among the 380 fuel channels, outer rows 1 and 2 (called the FARE channel) make the process of using only the internal fluid force impossible because of the low flow rate of the channel cooling water. Therefore, a Flow Assist Ram Extension (FARE) tool, a refueling aid, is used to refuel these channels in order to compensate for the insufficient fluid force. The FARE tool causes flow resistance, thus allowing the fuel to be moved down with the flow of cooling water. Although the existing FARE tool can perform refueling in Korean plants, the coolant flow rate is reduced to below 80% of the normal flow for some time during refueling. A Flow rate below 80% of the normal flow cause low flow rate alarm signal in the plant operation. A flow rate below 80% of the normal flow may cause difficulties in the plant operation because of the increase in the coolant temperature of the channel. A new and improved FARE tool is needed to address the limitations of the existing FARE tool. In this study, we identified the cause of the low flow phenomena of the existing FARE tool. A new and improved FARE tool has been designed and manufactured. The improved FARE tool has been tested many times using laboratory test apparatus and was redesigned until satisfactory results were obtained. In order to confirm the performance of the improved FARE tool in a real plant, the final design FARE tool was tested at Wolsong Nuclear Power Plant Unit 2. The test was carried out successfully and the low flow rate alarm signal was eliminated during refueling. Several additional improved FARE tools have been manufactured. These improved FARE tools are currently being used for Korean CANDU plant refueling.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3220-3225
• /
• 2011

Current IT Tools for construction project have been developing to satisfy the requirements of improving productivity and quality. Especially, the critical technology of the construction IT tools is the BIM (Building Information Modeling) which integrates and controls the construction information by modeling the structures in the virtual environment. Many domestic studies have been performed for developing various BIM tools and these have been demonstrated through a successful case study. However, because of the most studies focused on architecture and major construction firms, small construction firms are very difficult to utilize a BIM tool without a verification of it. To resolve these problems, this study suggests performance indicators to quantitatively assess the utilization of 4D CAD which is one of the representative BIM tools by BSC (Balanced Score Card). This performance indicator will be used as a measurement for applying IT tools in Construction Project.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.188-194
• /
• 2015

This paper proposes a generalized regression neural network (GRNN) based algorithm for data interpolation and design optimization of brushless dc (BLDC) motor. The procedure makes use of magnet length, stator slot opening and air gap length as design variables. Cogging torque and average torque are treated as performance indices. The optimal design necessitates mitigating the cogging torque and maximizing the average torque by varying design variables. The data set for interpolation and ensuing design optimisation using GRNN is obtained by modeling a standard BLDC motor using finite element analysis (FEA) tool MagNet 7.1.1. The performance indices of the standard motor obtained using FEA are validated with an experimental model and an analytical method. The optimal design is authenticated using particle swarm optimization (PSO) algorithm and the performance indices of the optimal design obtained using GRNN is validated using FEA. The results indicate the suitability of GRNN as an interpolation and design optimization tool for a BLDC motor.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.51-57
• /
• 2009

There are a variety of users and devices in a context-aware computing environment. In this environment, the service provided to a user may be the composition of diverse services rather than one independent service. Before user's devices provide the composite service to the user, they should perceive user's needs by gathering related information segments from other surrounding devices and/or sensors. We consider a context-aware computing environment providing composite and adapted service to users and propose an information processing model that characterizes the device where the collected data should be processed through services and/or applications. Based on this model, we provide an analytical tool to obtain some performance measures of the context-aware computing environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.61-68
• /
• 1992

To meet the requirements for accuracy, productivity and reliability of machine tools, it is necessary to evaluate the chatter-free machining performance and to improve the dynamic performance of machine tools. In order to perform dynamic design of machine tools reasonably and effectively, the joint parts must be modelled accurately because their characteristics affect significantly on the total characteristics of machine tool. In this paper, an approach which identifies the effect of joint parts on the performance of total machine tool structure was proposed. That uses the experimental modal analysis, the finite element method and the sensitivity analysis method. The effectiveness of this approach was confirmed by applying it to structures with bearing joints. And as a result of the application, the change of dynamic characteristics of bearing joints was indentified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.29-46
• /
• 1999

The performance based design obligates quantitative assessment of required performances by means of transparent and objective science. In this design scheme, simulation of both macro and micro-scale structural behaviors is thought to be a powerful tool. This paper proposes a way how to unify the structural safety and serviceability check method and durability assessment of RC structures. Though component chemical-physical processes are crudely assumed, system dynamics of micro-scale pore structure formation and macro-scale defects and deformation of structures was shown as possible and promising approach in future. The authors understand that the unification of structural and durability design has just started. For further progress and development, predictive tool of structural behaviors from birth to death of concrete under any specified environment and load serves as an essential technicality.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.115-124
• /
• 1994

In this paper, we have developed a performance analysis tool for communication networks called COMNAS. COMNAS analyses the performance of wide area networks such as Korea Educational Network and Korea Research Environment Open Network which include local area networks such as Ethernet and Token Ring. COMNAS consists of model constructor, simulation implementor, output analyzer and user interface. Attributes of communication networks for modeling either have default values or are entered by user as object units, and implementation of simulation is automatically proceeded by user interface. Ouput results obtained by COMNAS are the status of node, link and entire network such as mean message transmission delay, throughput, utilization, and so on, and they can be selectively obtained upon the request of the user.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.865-869
• /
• 1997

In recent years, there has been increasing demand of ultra-fine grain graded cemented tungsten carbide material with high hardness and toughness which is used as high speed cutting tool for development in semiconductor, electronics and die/mold industry, which bring into limelight high-precision, high-efficient machining of sculptured surfaces. This paper deals with the performance of variation in the ultra-fine grain graded cemented tungsten carbide material such as grain size, hardness and density varied according to the volume of added elements, Co or TaC, and he changing of mixing, sintering process. Also, the performance of developing material with uniformed grain size of 0.5${\mu}{\textrm}{m}$ is compared with other domestics' & foreign companies' with analyzing and cutting performance testing.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.271-276
• /
• 2010

High-speed air turbine handpieces have been used as a denture cutting tool in clinical dentistry for over 50 years. The denture high-speed air turbine handpiece is currently used as the main means of cutting tooth structure and restorative materials in a wide range of denture manufacturing. But little study has been reported on their performance analysis. This research would show the performance characteristics of denture air turbine handpiece by using CFD.