• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.101-102
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2010

• 대한산업공학회지
• /
• 제13권1호
• /
• pp.61-67
• /
• 1987

A tool for optimizing simulated discrete variable stochastic systems, SIMICOM was developed and presented in [5]. In this paper an evaluation of its performance and results of comparisons with other popular methods for dealing with simulation-optimization problems will be provided. Based on several test problems it is concluded that SIMICOM dominates those methods.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.57-63
• /
• 2014

At present, a high-speed swivel tool head of a small size is required to improve the productivity of CNC automatic lathes. Hence, there is growing interest in shorter machining times with higher cutting speeds. However, an increase in the rotation speed of a swivel tool head also has adverse effects, such as vibration and noise caused by the swivel tool head system. In this work, the fatigue life and contact pressure of a swivel tool head bearing system driven by gears were calculated. Based on the calculated results, a prototype swivel tool head was manufactured and its static and dynamic characteristics, i.e., the vibration, noise and precision, were measured using a reliability testing device which allows the application of cutting force to the end of the swivel tool head.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.147-154
• /
• 2003

An effective die-polishing robot system is developed. ATC (Automatic Tool Change), tool posture angle control, and robot program for polishing application are developed and integrated into a robotic system that consists of a robot, pneumatic grinding tool, and grinding abrasives (papers and special films). ATC is specifically designed to exchange whole grinding tool set for complete unmanned operation. A tool posture angle control system is developed for the tools to maintain a specified skew angle rather than right angle on the surface for best finishing results. A PC and the robot controller control ATC and tool posture angle. Also, there have been more considerations on enhancing the performance of the system. Elastic material is inserted between the grinding pad and the holder for better grinding contact. Robot path data are generated automatically from the NC data of previous machining process.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.89-95
• /
• 2001

Ceramic tool has to equip with not only high toughness and strength but also low thermal expansion and good thermal conductivity which leads to the high thermal shock resistance. These characteristics make it have longer tool life under thermal stress condition. In this study, commercial Si$_3$N$_4$ceramic cutting tool and home-made SiC based ceramic cutting tools which have different sintering time and chemical composition are tested under various cutting speed and the feed rate increase, the cutting force and the flank wear growth ratio increase, too. The performance of home-made SiC based ceramic cutting tool shows the possibility to be a new ceramic tool.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.89-94
• /
• 2003

Hard coatings are known to improve the performance of cutting tools in aggressive machining applications, such as high speed machining. New superhard Ti-Al-Si-W films, characterized by a nanocomposite nano-sized (Ti,Al,Si)N crystallites embedded in amorphous $Si_3 N_4$ matrix, could be successfully synthesized on WC-Co substrates by a hybrid coating system of arc ion plating(AIP) and sputtering method. The hardness of Ti-Al-Si-N film increased with incorporation of Si, and had the maximum value ~50 GPa at the Si content of 9 at.%, respectively. And the X-ray diffraction patterns of Ti-Al-Si-N films with various Si content is investigated. In this study, Ti-Al-Si-N coatings were applied to end-mill tools made of WC-Co material by a hybrid coating system. Cutting tests fir the high-hardened material (STD11,$H_R$)C62 and their performances in high speed cutting conditions were studied. Also, the tool wear and tool lift of Ti-Al-Si-N with various si(6, 9, 19) contents were measured.

• 사상체질의학회지
• /
• 제24권3호
• /
• pp.42-49
• /
• 2012

Objectives This study aimed to assessing the performance of Sasang constitutional analysis Tool (SCAT) for Chinese as one of method to diagnose Sasang Constitution and evaluating the possibility of applying SCAT to foreign people. Methods This cross-sectional study was approved by IRB (Independent Review Board) at J Hospital in Yanbian. Informed consent to take part in the study was obtained from each of the participants. The performance of SCAT was assessed through Kappa coefficient and the concordance rate between SCAT and expert diagnosis. Results The concordance rate between SCAT and expert was 61.1% in total and the Kappa was 0.408. When the constitutional probability increased, the concordance rate and Kappa showed a increasing tendency. The concordance rate of Chosun race was 62.1% and others 60.7%. Conclusions SCAT, as Sasang constitutional diagnostic supporting system, may help the expert to diagnose Sasang constitution in Yanbian region.

• 인지과학
• /
• 제19권4호
• /
• pp.331-367
• /
• 2008

웹 기반 신경심리검사의 타당도를 저해할 수 있는 요인들에 대한 해결책의 일환으로 검사 툴의 인터페이스 디자인을 개선하고자 세 단계를 거쳐 연구를 진행하였다. 연구 1은 곽호완의 웹 기반 신경심리검사 중 주의력 검사 툴의 UI 디자인 문제점을 파악하기 위한 것으로, 전문가에 의한 발견적 시찰법을 실시하였다. 그 결과, 이 검사 툴의 지시 화면, 조사 양식, 과제 화면, 결과 화면 등의 디자인에서 세부적인 사용성 문제점들이 드러났다. 연구 2는 찾아낸 사용성 문제점을 해결하기 위해 웹 기반 주의력 검사에 특화된 11개 디자인 가이드라인을 도출하였다. 이를 토대로 사용자의 작업 흐름에 맞추어 화면 구성과 사이트 구조 등을 최적화하고 재미 요소를 가미하여 검사 툴을 새롭게 디자인 한 다음, JAVA를 이용하여 프로토타입을 개발하였다. 이렇게 구현한 개선 툴(그래픽 툴)이 기존 툴(텍스트 툴)에 비해 더 효과적임을 검증하기 위해, 연구 3에서 사용자들을 대상으로 수행 측정과 설문 조사를 실시하여, 실수 유형과 출현비율 및 UI 만족도를 측정하였다. 수행 측정 결과, 그래픽 툴이 텍스트 툴에 비해 UI 디자인 문제들로 인해 발생하는 사용자 실수 유형과 출현비율이 유의하게 감소하였다. 사후 설문 조사 분석 결과, 텍스트 툴에 비해 그래픽 툴은 전반적인 만족도, 화면, 용어와 시스템 정보, 학습 용이성, 시스템 성능 등의 만족도 측면에서 우수한 것으로 입증되었다.