• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.20-27
• /
• 2000

A chatter vibration and a workpiece burn are the main phenomena to be monitored in modern grinding processes. This study describes a trouble diagnosis of the cylindrical plunge grinding process using the power and acoustic emission (AE) signals. The raw signals of the power and the AE occurred during the grinding operation were sampled and analyzed to determine the relationship between each fault and change of signals. A neural network that has a high success rate of the fault detection was used. Furthermore, an analysis on the influence of parameters to the chatter vibration and the grinding burn was conducted.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.69-76
• /
• 1994

AE(Acoustic Emission) signal is correlated to workpiece material, cutting conditions and tool geometry during metal cutting. The relationship between AE signal and cutting parameters can be obtained by theoretical model and experiments. The value of CR(Count Rate) is nearly constant in stable cutting, but when the chatter vibration occours, the value of CR is rapidly increased due to the vibration deformation zone. By experimental signal processing of AE, it is more effective than by RMS(Root Mean Square) measurement to detect the threshold of chatter vibration by CR measurement.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.55-64
• /
• 2001

In this study, hemisphere and cylindrical shapes were machined for different tool paths and machining conditions with ball endmill cutters. Tool deflection, cutting forces and shape accuracy were measured according to the inclination position of the sculptured surface. As the decreasing of inclination position angle, the tool deflection was increased due to the decreased cutting speed when the cutting edge is approaching toward the center. Tool deflection when upward cutting is obtained less than that of downward cutting and down-milling in upward cutting showed the least tool deflection for the sculptured surface. Roundness values were found in least roundness error when down-milling in upward cutting. It is obtained the very little difference between 90。and 45。 of inclination position angle. The best surface roughness value was obtained in upward up-milling and showed different tendency with tool deflection and cutting force. For down-milling, the cutting resistance of the side wall direction is larger than that of feed direction. Therefore, this phenomenon which is received over cutting resistance can be caused of chatter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.761-769
• /
• 2008

The majority of mechanical parts are manufactured by milling machines. Hence, geometrically efficient algorithms for tool path generation and physical considerations for better machining productivity with guarantee of machining safety are the most important issues in milling tasks. In this paper, an optimized path generation algorithm for direction parallel milling which is commonly used in the roughing stage is presented. First of all, a geometrically efficient tool path generation algorithm using an intersection points-graph is introduced. Although the direction parallel tool path obtained from geometric information have been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In order to cope with these problems, an optimized tool path, which maintains constant MRR in order to achieve constant cutting forces and to avoid chatter vibrations at all time, is introduced and the result is verified. Additional tool path segments are appended to the basic tool path by using a pixel based simulation technique. The algorithm has been implemented for two dimensional contiguous end milling operations, and cutting tests are conducted by measuring spindle current, which reflects machining situations, to verify the significance of the proposed method.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.37-45
• /
• 2007

End-milling is intermittent cutting process performed by a tool with a number of teeth. Its cutting forces are commonly measured by the tool dynamometer which has rectangular coordinates. In this case, the pattern of cutting forces is different according to cutting conditions. At a certain cutting condition, the sign of cutting force changes from positive to negative during a revolution of one tooth. The change of force direction excites a cutting tool and severe vibration arises when radial depth of cut increases. In this study, cutting experiments and simulations were carried out in order to explain the cause of the change of the cutting force direction. In addition, the effect of the cutting force change was discussed in terms of chatter vibration in end milling.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.135-142
• /
• 1998

The performances of cutting process is mostly affected by the characteristics of closed loop system constructed with machine tool structure, work piece and tools. The chucking system is very important component in this system to hold work piece correctly in various static and dynamic load condition. Therefore, chucking force and accuracy must be considered carefully, from these reason, this paper describes the stability of chucking system which preserve high stiffness and accuracy of machine tool system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.24-30
• /
• 2002

In grinding operations, one of the most important problems is to increase efficiency of process. In order to achieve this purpose, it is necessary to administer the tool lift of grinding wheel and to optimize grinding conditions. Frequently dressing result in lowering the process efficiency remarkably and makes production cost high. On the other hand, grinding with a worn wheel causes the workpiece surface roughness to increase and often results in the occurrence of such troubles as chatter vibration and homing.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.61-68
• /
• 1992

To meet the requirements for accuracy, productivity and reliability of machine tools, it is necessary to evaluate the chatter-free machining performance and to improve the dynamic performance of machine tools. In order to perform dynamic design of machine tools reasonably and effectively, the joint parts must be modelled accurately because their characteristics affect significantly on the total characteristics of machine tool. In this paper, an approach which identifies the effect of joint parts on the performance of total machine tool structure was proposed. That uses the experimental modal analysis, the finite element method and the sensitivity analysis method. The effectiveness of this approach was confirmed by applying it to structures with bearing joints. And as a result of the application, the change of dynamic characteristics of bearing joints was indentified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.31-35
• /
• 2001

Three dimensional dynamic cutting can be postulated as an equivalent orthogonal dynamic cutting through the plane containing both the cutting vector and the chip flow velocity vector in cutting process. An analytical expression of dynamic cutting force is obtained from the cutting parameters determined by the static three dimensional cutting experiments. Particular attention is paid to the energy supplied to the vibration of the tool behind the vertical vibration and the direction. The phase lag of the horizontal vibration of the tool behind the vertical vibration and the direction angel of the fluctuating cutting force must be regarded in point of stability limits. Chatter vibration can effectively be suppressed by enlarging the dynamic rigidity of the cutting system in the vertical cutting force direction. A good agreement is found between the stability limits predicted by theory and the critical width of cut determined by experiments.