• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1669-1680
• /
• 1992

This paper deals with the prediction of cutting force and tool deflection and it's application in the flexible ball end milling process. Machining accuracy is determined by the static stiffness of tool system and the instantaneous cutting force. The static stiffness of tool system consists of the stiffness of holer and the stiffness of ball end mill. The stiffness of holder was obtained from the experimental result, and the stiffness of ball end mill with two flutes was theoretically analyzed by the finite elements method. In cutting process, the instantaneous cutting force is dependent upon the instantaneous feed and pick feed(radial depth of cut) which are varied by tool deflection. For the calculation of cutting force and deflection of ball end mill, iteration method is used with the linear interpolation to the data of cutting force obtained from rigid ball end mill and the data of tool deflection. In this paper, a for enhancing accuracy is discussed. And the selection of helix angle for minimizing machining error is also discussed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.84-91
• /
• 2003

In metal cutting operation, it is very important that predict cutting force and work surface. Vibration is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. When vibration on, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in machining center without cutting fluid to investigate the phenomenon of vibration. In the experiments, accelerometers were set up at the tail stock and tool holder and signals were picked up. Surface roughness profiles are generated under the ideal condition and the occurrence of vibration based on the surface shaping simulation model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.184-189
• /
• 2003

In metal cutting operation, it is very important that predict cutting force and work surface. Vibration is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. when Vibration occurs, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in machining center without cutting fluid to investigated phenomenon of the Vibration. In the experiments, accelerometers were set up at the tail stock and tool holder and the signals were picked up. In this paper, surface roughness profiles will be generated under the ideal condition and the occurrence of the vibration based on the surface shaping simulation model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.2
• /
• pp.16-23
• /
• 2005

This study is intended to find out the reason of interference phenomenon of a machine tool when it operates for 5-axises working. The researcher made a Virtual Machine which has same figures of the 5 axises machine tool and Virtual Manufacturing System which has both Software factors - controller and NC code data to manipulate the movement characteristics of the machine - and Hardware factors - fixtures, workpiece, tools, holders and so on. With these virtual tools, this study is designed to find out the relation between the movement and the interference or collision, and also intended to verify the simulation and work-processing. In this study, the researcher found out, in case of the vertical 5 axises type, that it has more chances to have interference between the fixture, the workpiece and the main spindle including the tool holder due to the tilting kinetics of the main spindle. In case of the horizontal 5 axises type, on the other hand, the researcher found out that it has more possibility to have the interference between the main spindle and the rotary shaft.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.83-89
• /
• 2009

In most multi-stage forging processes, the die spotting process or alignment of punch and die depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper proposes a measurement system for alignment of die and punch which has a cylindrical holder, and describes the system concepts using 3 eddy-current displacement transducers and precise measurement jig. In order to apply this measurement system to real situations, the measuring procedures and system calibration method, etc. are proposed. Finally, the accuracy and productivity of this measurement system are investigated in this paper.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.37-44
• /
• 1993

Fuel injection system is an important tool in the exhaust emission and performance of a diesel engine. Effects of the fuel injection system in diesel combustion was investigated experimentally by measuring the performance and analyzing the combustion phenomena in a D.I. diesel engine. The selected injection parameters were nozzle opening pressure, nozzle projection length, and nozzle spray angle. From the measured results, it is shown that the fuel injection pipe diameter is an effective means to improve engine performance in a middle and high speed range and the 2 stage spring nozzle holder has the advantage of increasing the engine performance due to the initial injection pressure in a low speed range. It has been also shown that increasing nozzle opening pressure resulted in decrease in smoke, but increase in NO$_{x}$ from the engine.e.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.873-877
• /
• 1997

This paper presents experimental results to know the charcteristics of machined surface due to cutter runout. Cutter runout is a common but undesirable phenomenon in multi-tooth machining such as end-milling process because it introduces variable chip loading to insert which results in a accelerated tool wear, amplification of force variation and hence enargement vibration amplitude. To develop in-proess cutter runout compensation system, set-up the micro-positoning mechanism which is based on piezoelectric translator embeded in the work holder to manipulate the depth of cut in real-time. And feasibility test of system was done under the various experimental cutting conditions. This results provide lots of information to build-up the precision machining technology.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.52-59
• /
• 2004

This paper shows about the machine simulation embodiment when it happens NC equipment and between workpiece and interference in 5 axises machining of aluminium alloy a vehicles parts. And this research has been chosen because of the highest equipment interference occurrence rate at a vehicles parts processing of 5 axises horizontal machine. It can verify simulation and machining process through correlation of their dynamic relations, interference, collision as embodied virtual manufacturing system of machine, workpiece, and holder etc. That is necessary element in shape of machine tool, function and processing in imagination ball. Also, it verifies about interference and collision between NC equipment and workpiece, as it applied machine simulation to NC Data of actuality aircraft parts of BULKHEAD and FRAME. As the result of this study, by removing the equipment interference and collision element which creates NC data, the virtual machine tool it the efficiency of machine process has increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.194-202
• /
• 2002

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D lay-out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.382-386
• /
• 2001

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but Application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D Lay-Out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape