• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1-13
• /
• 2002

최근 자동차가 편리성과 안전성을 추구함에 따라서 자동차 부품도 과거의 기계식 동작 방법에서 전자 제어 장치가 부착된 전자식 동작 방법으로 발전되어 가고 있는 추세입니다. 또한 연비 향상을 위하여 부품의 소형화가 급속히 추진되고 있습니다. 이러한 전자화, 소형화를 실현시키기 위해 자동차 부품에서의 정밀성이 요구되어 지고 있고, 부품 제조 측면에서는 고속화, 정확성이 요구되고 있는 실정입니다. 당사의 경우 CBS (Conventional Brake System)를 생산하다가 전자 제어 장치가 부착된 ABS (Anti-lock Brake System)의 생산을 시작할 때, 부품의 정밀도를 좌우하는 각 치수의 공차 영역이 전체적으로 CBS 대비 약 1/5 수준밖에 되지 않고, 가공 속도는 약 2 배가 빨라야 하기 때문에 생산 준비 단계에서 많은 시행 착오를 겪어야만 했습니다. 여기서 당사가 ABS를 양산하면서 겪은 경험을 토대로 기술토록 하겠습니다. 가공 기술의 경우 고속, 정밀 가공을 실현시키기 위해서 크게 4 가지 측면을 고려해야만 하며, 그 4가지는 설비, Tool Holder, Tool, Chip 측면입니다. 먼저 설비가 고정도가 되기 위해 고강성을 필요로 하는 것은 물론 가동중에 필연적으로 발생하는 열변형에 대한 대책을 수립하지 않으면 안됩니다. 이러한 열변형은 설비 설계 단계에서 대책을 수립할 수 있는 것도 있지만 주위 온도 변화에 의한 열변형처럼 사용 중에 발생되는 것은 설비 사용자가 장시간에 걸친 Data 를 확보하여 대책을 수립하지 않으면 안됩니다. 또한 Tool Holder의 정도도 일반적으로 사용하는 것보다는 고정도의 것이 요구되어지므로 Tool Holder Maker 에 반드시 요구 정도를 명기하여 주문하여야 합니다. Tool도 고속화를 실현시키기 위해 고정도의 다이아몬드 공구가 필요하였고 이를 국내에서 개발하기 위해 많은 시행 착오를 겪어야만 했습니다. 또한 Chip 배출이 고정도의 필수 고려 항목으로서 당사에서는 경우에 따라 여러 가지의 방법을 사용하고 있습니다. 조립 기술의 경우 스테인레스 박판을 열변형을 최소로 하면서 용접을 하기 위해서 레이저 용접을 도입하였고, 부품을 압입하면서 정확하고 정밀한 치수 셋팅을 위하여 서버 모타를 이용한 압입 방법을 사용하였습니다.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.268-273
• /
• 2011

In light guide panels, the PMMA sheet that is used in liquid crystal displays plays an important role in scattering the incident light and requires very fine machining as the sheet is directly related to the optical characteristics of the panels. High speed end milling(HSE) and high speed shaping(HSS) processes that are widely adopted and applied to the precise machining of light incident plane through vibration-assisted HSS for increasing the optical quality by minimizing the above-mentioned problems. The cutting tool and the tool post presented in this paper are designed by the authors to increase the magnitude of the cutting stroke by adopting the resonant frequency without weakening the stiffness and to reduce vibrations during even high speed feeding. The dynamic haracteristics of thecutting tool and the tool post are evaluated through simulation and experiment as well. The results reveal very appropriate dynamic characteristics for vibration-assisted HSS.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.59-64
• /
• 2008

Spindle units of machine tool are very important part in the manufacturing area. Recently high speed machining has become the main issue of metal cutting. To develop high speed machine tools, a lot of studies have been carried out for high speed spindle. Due to increase of the rotational speed of the spindle, there has been renewal of interest in tooling system of high speed spindle. This paper concerns the static stiffness in the main spindle interface according to variation of clamping force, rotational speed and tool holder shank. Finite element analysis is performed by using a commercial code ANSYS workbench. From the results, it has been shown that the geometry of tool holder shank is mostly influence on the variation of the static stiffness in the main spindle interface.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.239-254
• /
• 2006

In mold structure machining, tool interference is a phenomenon which results from a collision between a blade of tool and a workpiece. Also tool collision is a phenomenon which results from a collision of holder with the object to be machined. These phenomena not only cause damages to mold and tool but also increase machining time and cost. To detect a collision of a tool to mold structure, first of all, the mold structure and a tool must be defined with famous geometric models such CSG, B-rep, and Voxel. A tool is defined as a combination of the blade, the shank, and the holder. This thesis reviews various collision detection algorithms using z-map and computer 3D graphic collision detection algorithms for the tool in machining a mold structure.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.409-428
• /
• 2004

In this paper, a Holder exponent, a measure of the degree to which a signal is differentiable, is presented to detect the presence of a discontinuity and when the discontinuity occurs in a dynamic signal. This discontinuity detection has potential applications to structural health monitoring because discontinuities are often introduced into dynamic response data as a result of certain types of damage. Wavelet transforms are incorporated with the Holder exponent to capture the time varying nature of discontinuities, and a classification procedure is developed to quantify when changes in the Holder exponent are significant. The proposed Holder exponent analysis is applied to various experimental signals to reveal underlying damage causing events from the signals. Signals being analyzed include acceleration response of a mechanical system with a rattling internal part, acceleration signals of a three-story building model with a loosing bolt, and strain records of an in-situ bridge during construction. The experimental results presented in this paper demonstrate that the Holder exponent can be an effective tool for identifying certain types of events that introduce discontinuities into the measured dynamic response data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.3-8
• /
• 2002

An intelligent polishing robot automation system is developed. Automatic Tool Change System(A.T.C.), Tool Posture Angle Control, and Robot Program for Polishing Application are developed and integrated into a robotic system that consists of a robot, pneumatic finding tool, and finding abrasives (papers and special films). A.T.C. is specifically designed to exchange whole grinding tool set for complete unmanned operation. Tool Posture Angle Control is developed to give a certain skew angle rather than right angle to tools on the surface for best finishing results. A.T.C. and Tool Posture Angle Control is controlled by a PC and the robot controller. Also, there have been some considerations on enhancing the performance of the system. Some elastic material is inserted between the grinding pad and the holder for better grinding contact. The robot path data is generated automatically from the NC data of previous machining process.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1092-1096
• /
• 1988

본 연구에서는 생산관리 정보와 기술정보를 동시에 처리하는 생산정책(produ- ction strategy)인 컴퓨터 통합제조(CIM:Computer Integreated Manufacturing)를 위한 공구 관리 시스템(tool management system)의 개발에 관한 것으로 대상 공구는 NC 선 반공구로 제안하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.309-313
• /
• 2000

In order to meet the industrial requirement, precision grinding with brush tool has been applied. To analyze the brush tool characteristics, several parameters including numbers of brush string installed in a single holder, depth of cut and brush length have been changed. Several data from various source were acquired using AE, acceleration and tool dynamometer during the process. Consistent results revealing certain trend with respect to each process condition were observed.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.53-60
• /
• 1992

This paper deals with developing an Expert system for tool selection using knowledge base system approach, and its application. For the sake of building of knowledge base, the information from process through sensor, tool handbook and interview with expert are referrenced and managed. The system developed shows good application flexibility in providing the actual cutting process with the selection of tool(insert, holder) and cutting conditions(feed, speed, rake type, and so on), is found as a useful system for real-time machining process. The Expert system for tool selection is written in TURBO PROLOG ver. 2.0 for inference engine capability, and can be run in interactive mode for user friendliness. In order to apply the system developed in actual cutting process, more parameters should be considered and scrutinized, and the system should be further extended in modular basis.