• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.367-374
• /
• 2003

In this paper, we propose an audio watermarking method using the attribute of tonal masker. First, the attribute of tonal masker as an audio watermarking attribute is analyzed. According to existing researches, it is possible to be imperceptible modulation for the energies of the frequencies that compose a tonal masker. And when the relation between the tone energy and the left or right frequency energy after various signal processing is compared with the one before the processing, very few changes are showed. We propose an audio watermarking method using these attributes of tonal masker. A watermark bit is embedded by the modulation of the difference between the two neighboring frequency energies of a tone. In the detection, the modulated the tonal masker is searched using the key wed in the embedding without original audio and the embedded watermark bit is detected. After each attack of noise insertion, band-pass filtering, re-sampling, compression, echo transform and equalization, the detection error ratios of the proposed method were average 0.11%, 1.26% for Classics and Pops. And the SDG(Subjective Diff-Grades) scale evaluation of the sound quality of the watermarked audio result in the average SDG -0.31.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.229-237
• /
• 2017

In this paper we propose an auto tonal detection method which exploits short term stationary when targets located in a detection beam area and then additional methods are proposed in order to reduce the computational complexity of the proposed method. The proposed method is adaptive to input signals and robust against interference caused by multiple targets because it compares an expected value of input signals with a threshold value which are estimated from a single beam while signals are keep stationary. The performances of the proposed methods are evaluated using by simulated data and acquired data from real ocean. The proposed method has shown better performance than conventional CFAR (Constant False Alarm Rate) methods.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.543-548
• /
• 2019

The tonal signal caused by the machinery component of a vessel such as an engine, gearbox, and support elements, can be modeled as a sparse signal in the frequency domain. Recently, compressive sensing based techniques that recover an original signal using a small number of measurements in a short period of time, have been applied for the tonal frequency detection. These techniques, however, cannot avoid a basis mismatch error caused by the discretization of the frequency domain. In this paper, we propose a method to detect the tonal frequency with a small number of measurements in the continuous domain by using the atomic norm minimization technique. From the simulation results, we demonstrate that the proposed technique outperforms conventional methods in terms of the exact recovery ratio and mean square error.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.39-45
• /
• 2018

Compressive sensing allows recovering an original signal which has a small dimension of the signal compared to the dimension of the entire signal in a short period of time through a small number of observations. In this paper, we proposed a method for detecting tonal signal which caused by the machinery component of a vessel such as an engine, gearbox, and support elements. The tonal signal can be modeled as the sparse signal in the frequency domain when it compares to whole spectrum range. Thus, the target tonal signal can be estimated by S-OMP (Simultaneous-Orthogonal Matching Pursuit) which is one of the sparse signal recovery algorithms. In simulation section, we showed that S-OMP algorithm estimated more precise frequencies than the conventional FFT (Fast Fourier Transform) thresholding algorithm in low SNR (Signal to Noise Ratio) region.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.816-823
• /
• 2003

In this paper, we propose a blind audio watermarking using the tonal characteristic. First, we explain the perceptional effect of tonal on the existed researches and shout the experimental result that tonal characteristic is more stable than other characteristics used in previous watermarking studies against several signal processing. On the base of the result, we propose the blind audio watermarking using the relation among the signals on the frequency domain which compose a tonal masker. To evaluate the sound quality of our watermarked audios, we used the SDG(Subjective Diff-Grades) and got the average SDG 0.27. This result says the watermarking using the perceptional effect of tonal is available from the viewpoint of non-perception. And we detected the watermark hits from the watermarked audios which were changed by several signal processing and the detection ratios with exception of the time shift processing were over 98%. About the time shift processing, we applied the new method that searched the most proper position on the time domain and then detected the watermark bits by the ratio of 90%.

• Speech Sciences
• /
• v.14 no.1
• /
• pp.37-62
• /
• 2007

The current study examines the role of post-lexical tonal patterns of a prosodic phrase in word segmentation. In a word spotting experiment, native Korean listeners were asked to spot a disyllabic or trisyllabic word from twelve syllable speech stream that was composed of three Accentual Phrases (AP). Words occurred with various post-lexical intonation patterns. The results showed that listeners spotted more words in phrase-initial than in phrase-medial position, suggesting that the AP-final H tone from the preceding AP helped listeners to segment the phrase-initial word in the target AP. Results also showed that listeners' error rates were significantly lower when words occurred with initial rising tonal pattern, which is the most frequent intonational pattern imposed upon multisyllabic words in Korean, than with non-rising patterns. This result was observed both in AP-initial and in AP-medial positions, regardless of the frequency and legality of overall AP tonal patterns. Tonal cues other than initial rising tone did not positively influence the error rate. These results not only indicate that rising tone in AP-initial and AP_final position is a reliable cue for word boundary detection for Korean listeners, but further suggest that phrasal intonation contours serve as a possible word boundary cue in languages without lexical prominence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.915-920
• /
• 2007

Using the existing algorithms that estimate the background noise, the detection probability for the week tonals is low and for the even week tonals, there is a limit not detected. Therefore it is required to algorithms which can improve the performance of the tonal extraction. Recently, many researches using artificial neural networks in sonar signal processing are performed. We propose a neural network with double feedback that can remove automatically the background noise and detect the even week tonals buried in background noise, therefore not detected by growing the week tonals lastingly for a certain time. For the real underwater target, experiments for the tonal extraction are performed by using the existing algorithms that estimate the background noise and the proposed neural network. As a result of the experiment, a method using the proposed neural network showed the better performance of the tonal extraction in comparison with the existing algorithms.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.912-919
• /
• 2022

The study is an image-based assessment that uses image processing techniques to determine the condition of concrete with surface cracks. The preparations of the dataset include resizing and image filtering to ensure statistical homogeneity and noise reduction. The image dataset is then segmented, making it more suited for extracting important features and easier to evaluate. The image is transformed into grayscale which removes the hue and saturation but retains the luminance. To create a clean edge map, the edge detection process is utilized to extract the major edge features of the image. The Otsu method is used to minimize intraclass variation between black and white pixels. Additionally, the median filter was employed to reduce noise while keeping the borders of the image. Image processing techniques are used to enhance the significant features of the concrete image, especially the defects. In this study, the tonal zones of the histogram and its properties are used to analyze the condition of the concrete. By examining the histogram, the viewer will be able to determine the information on the image through the number of pixels associated and each tonal characteristic on a graph. The features of the five tonal zones of the histogram which implies the qualities of the concrete image may be evaluated based on the quality of the contrast, brightness, highlights, shadow spikes, or the condition of the shadow region that corresponds to the foreground.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1127-1130
• /
• 1999

In this paper, using one method of Additive Synthesis, Analysis-by-synthesis/Overlap-Add (ABS/OLA) method, analysis and synthesis of musical tones is processed. But peak detection of frequency domain is processed by proposed method considering the view of acoustics. It is that that harmonics frequency is times of main frequency. Using this fact, peak detection of frequency domain is useful for detection of tonal component identified musical note. It is possible to realize high-quality lour bit rate audio.