• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.84-88
• /
• 1996

In this paper, we propose a novel adaptive digital filter for tonal noise cancellation, with a frequency tracking capability. The proposed algorithm not only estimates the magnitude and phase of the tonal disturbance but also tracks its frequency, which changes in quasi-static manner. The algorithm uses the steepest descent method and the instantaneous frequency approach for the phase/magnitude estimation and frequency tracking, respectively. A number of computer simulations have been carried out in order to demonstrate the feasibility of the proposed ANC algorithm under various conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.621-624
• /
• 2005

Among many auditory feelings for the vehicle interior noise, booming is considered as the most important nuisance to the passenger and developer. Because the main source of booming noise is a power train system including engine, in general, it consists of tonal components related to fundamental engine rotation and its harmonics including the firing frequency. Therefore, it is demanded to extract the effective tonal components only by using pitch extraction algorithm based on the place theory enable to find aurally relevant tonal components. However, there is a difference between booming sensation and pitch perception according to frequency change of tonal component. In this study, subjective listening test using a tracking method was performed to find the difference limen for just noticeable change of booming sensation in frequency. 20 Koreans and 10 Japanese were participated in this test and the results obtained from Koreans and Japanese were compared with each other. Finally, 5Hz was determined as the difference limen for just noticeable change of booming sensation in frequency, and by applying this value to booming analysis using pitch concept, it was confirmed that the degree of prediction of booming sensation was improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.915-920
• /
• 2007

Using the existing algorithms that estimate the background noise, the detection probability for the week tonals is low and for the even week tonals, there is a limit not detected. Therefore it is required to algorithms which can improve the performance of the tonal extraction. Recently, many researches using artificial neural networks in sonar signal processing are performed. We propose a neural network with double feedback that can remove automatically the background noise and detect the even week tonals buried in background noise, therefore not detected by growing the week tonals lastingly for a certain time. For the real underwater target, experiments for the tonal extraction are performed by using the existing algorithms that estimate the background noise and the proposed neural network. As a result of the experiment, a method using the proposed neural network showed the better performance of the tonal extraction in comparison with the existing algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.443-450
• /
• 2018

A receiving array system can be applied for tonal noise analysis of underwater vehicles, but it is difficult to install and operate, and a lot of cost is required. In order to overcome this problem, this paper proposes a method to measure the tonal noise of underwater vehicle after synthesizing a virtual array using single receiver. The proposed method compensates the Doppler frequency and time delay caused by the movement of the underwater sound source and applies the focused beamforming technique. The performance of the proposed method was analyzed via simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.158-163
• /
• 2005

In this paper the aeroacoustic characteristics of a tilt-rotor system is measured by using a sealed model tilt-rotor. With a microphone array system and the do-dopplerization algorithm, the location and the characteristics of rotor noise are successfully measured. The most of high frequency noise (4kHz) is found to be located at rotor blade tips, but the low frequency tonal noise is dominant on the middle of the rotor blades. The measured tonal noise characteristics are compared to the results of theoretical calculation. At 0.5m distance from the rotor plane, measured and calculated data are relatively well matched regardless of rotating speed and collective pitch angie for the azimuthal angles between $0^{\circ}\;and\;60^{\circ}$. However, the data on the azimuthal angles between $70^{\circ}\;and\;90^{\circ}$ are not quite comparable. In addition, the compared data for far-field case (1.5m) are quite different. This is probably due to the unsteady effect which if not included in the theoretical calculation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.175-178
• /
• 2004

선박의 수중방사소음은 다양한 기계류나 추진기 혹은 선체와 유체간의 상호 작용으로 인하여 여러 형태의 특성신호로 나타나게 된다. 이는 선박의 운용조건, 장비 회전특성 및 내부구조에 따라 스펙트럼상에 상이한 주파수로 확인됨은 물론, 신호의 출현 형태에도 다양성을 보이고 있다. 일반적으로 선박소음은 속력 종속적인 추진 계통 성분과 비종속적인 보기류 신호로 구분되나 다수의 신호성분이 혼재되어 발생기원을 분류하는 것은 복잡한 과정을 거쳐야 한다. 본 연구에서는 이러한 점을 해결하기 위해 선박의 Tonal성 신호를 자동으로 탐지하고 분류하기 위해 규준화된 스펙트로그램 상에서 연속되는 신호에 가중치를 주어 지속성 신호여부를 판별한 후에 정해진 임계치를 초과하는 성분을 Tonal로 선정하였다. 선정된 Tonal에 대해 주파수선의 대역특성 및 시간 변동성에 대한 패턴인식 방법을 적용하여 Tonal의 발생기원이 속력 종속/비종속적인지를 자동으로 판별하는 알고리즘의 유용성에 대한 결과를 기술하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.359-367
• /
• 2008

The maximum sound pressure level in a ship is restricted by the international standard such as MIL-Std. 740-1 in order to protect hearing ability for the crew on a ship. Especially, the noise of a fan system is restricted by the maximum level of the sound power according to the military specification such as MIL-F-1900A. In this paper, the reduction of tonal noise for the fan-motor system on a ship is described related to the electrical as well as structural problems. For the electrical problems, the difference of the magnetic flux caused by the variation of the air-gap is described related to the bad concentricity of the motor housing and the shaft-bearing. And for the structural problem, the resonance of the fan motor system is described.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.106-110
• /
• 2004

The noise characteristics of the submarines and vessels are composed of tonal signals and background noises. Tonal signals are from the revolution of the motors or engines, and background noises are from the generation and disappearing of the bubbles around the vessels. We analyze the noises from maneuvering underwater vessels with ATW algorithm. We design broadband asymptotic noise generator using Hilbert transform and design the system which can generate asymptotic noise with sum of generated background noise and synthesized tonal signals. This system can be used as a cheating system from the torpedo shacks.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.199-202
• /
• 2002

본 논문에서는 사람의 청각 모델을 기반으로 잡음에 의해 손상된 음성 신호로부터 잡음 신호의 마스킹 특성과 신호에너지의 지각(知覺)을 나타내는 임계대역(critical band)에서의 잡음 에너지에 대한 지각 패턴인 noise excitation pattern을 이용한 잡음 에너지 차감과 잡음 추정 오차에 의한 변형된 음성신호 내의 순음(tonal) 성분과 비순음(non-tonal)성분의 보정을 통해 효과적인 음성 품질의 개선을 위한 연구를 하였다.