• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2009

PES (Programmable Electronic System) is used by software development for the train control system. PES has been widely used in real world and consists of hardware, firmware and application software. The PES are easily apply to many applications because its implementation has high flexibility. Many safety critical functions are realized through software in safety critical system. Normally, it is difficult to detect failures for PES system because the PES is too sophisticated to identify sources of the failure. So, the reliability analysis is needed by using software fault tolerance techniques. Currently, there are the recovery block, distributed recovery block, N-version programming, N self-checking programming in fault tolerance techniques. In this paper, the models of recovery block and N-version programming in software fault tolerance techniques are suggested by using the Markov model. Also, the reliability in the train control system is analyzed through changing time. The fault occupancy rates of the program, adjustment test and voter are stationary. So, the relation between time and reliability is presented by using Matlab program. In the result of reliability, the reliability of recovery block is more high than N-version programming in case of the same number of substitution block.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1737-1746
• /
• 2013

IbMYB1, a transcription factor (TF) for R2R3-type MYB TFs, is a key regulator of anthocyanin biosynthesis during storage of sweet potatoes. Anthocyanins provide important antioxidants of nutritional value to humans, and also protect plants from oxidative stress. This study aimed to increase transgenic potatoes' (Solanum tuberosum cv. LongShu No.3) tolerance to environmental stress and enhance their nutritional value. Transgenic potato plants expressing IbMYB1 genes under the control of an oxidative stress-inducible peroxidase (SWPA2) promoter (referred to as SM plants) were successfully generated through Agrobacterium-mediated transformation. Two representative transgenic SM5 and SM12 lines were evaluated for enhanced tolerance to salinity, UV-B rays, and drought conditions. Following treatment of 100 mM NaCl, seedlings of SM5 and SM12 lines showed less root damage and more shoot growth than control lines expressing only an empty vector. Transgenic potato plants in pots treated with 400 mM NaCl showed high amounts of secondary metabolites, including phenols, anthocyanins, and flavonoids, compared with control plants. After treatment of 400 mM NaCl, transgenic potato plants also showed high DDPH radical scavenging activity and high PS II photochemical efficiency compared with the control line. Furthermore, following treatment of NaCl, UV-B, and drought stress, the expression levels of IbMYB1 and several structural genes in the flavonoid biosynthesis such as CHS, DFR, and ANS in transgenic plants were found to be correlated with plant phenotype. The results suggest that enhanced IbMYB1 expression affects secondary metabolism, which leads to improved tolerance ability in transgenic potatoes.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.9-17
• /
• 2010

Corrective control compensates the stable-state behavior of asynchronous sequential machines so that the closed-loop system can be changed in a desirable way. Using corrective control, we present a novel fault tolerance scheme that overcomes permanent faults for asynchronous sequential machines. When a permanent fault occurs to an asynchronous machine, the fault is not recovered forever while the machine is irreversibly stuck in a set of failure states. But, if the machine has control redundancy in the limited behavior range, corrective control can be applied to solve the fault tolerance problem against permanent faults. We present the condition on detecting permanent faults and the existence condition of an appropriate corrective controller. The design procedure for the proposed controller is described in a case study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1239-1248
• /
• 2018

This paper proposes a fault tolerant and high efficiency operation algorithm for a 4 LEG DC/DC converter for a battery energy storage system(BESS) forming a main power source in a standalone DC micro grid. The BESS for the main power supply in the stand-alone DC micro-grid is required to operate at high speed according to fault tolerant control and load by operating at all times. Fault-tolerance control changes the short-circuit fault to an open-circuit fault by using a fuse in case of leg fault in 4 legs, and operates stably through phase shift control. In addition, considering the loss of the power semiconductor, the number of LEG operation is adjusted to operate at high efficiency in the full load region. In this paper, fault tolerant control and high efficiency operation algorithm of DC/DC converter for BESS in standalone DC micro grid is presented and it is proved through simulation and experiment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.4
• /
• pp.234-238
• /
• 1998

To select new germplasm for salinity tolerance from new plant type (NPT) breeding lines, the sixty F$_4$ lines selected from the crosses between Korean cultivars and IRRI's NPT lines were evaluated for salinity tolerance at the seedling stage with salinized culture solution (EC=12 dS/m) in the controlled conditions. Two NTP lines derived from a cross between 'Ilmibyeo' and 'IR66152-AC5-1', 'HR15258-7-1' and 'HR15258-27-1', were found to have good tolerance. The salinity tolerance of the lines was compared to their parents and the sensitive ('IR29') and tolerant ('Pokkali') checks in three salinity levels, no salinity (control) and an EC of 12 and 16 dS/m. Visual salinity score, shoot Na+ and Na-K ratio in two NPT lines was significantly low compared with the parents and IR29. Indicating that salinity tolerance of the lines might be derived from a transgressive segregation. The relative water content of the lines was higher than Pokkali, and the dry weight of shoot and root was proportionally decreased to salinity score and salinizing concentration. The visual salinity scores were significantly correlated with shoot Na concentration, Na-K ratio, relative water content, and reduction of dry weight (P<0.01). Their tolerance was attributed to root and shoot characteristics that led to high shoot water content, thus diluting the toxic effect of salts.

• Journal of Korean Academy of Nursing
• /
• v.44 no.4
• /
• pp.381-390
• /
• 2014

Purpose: The purpose of this study was to identify the effects of a Progressive Walking program (PW) on physical activity, exercise tolerance, recovery, and post-operative complications for patients with a lung resection. Methods: A nonequivalent control group non-synchronized design was utilized and 37 participants with a lung resection (22 for control group, 15 for experimental group) were recruited at A university hospital from December 2012 to August 2013. The PW consisted of preoperative education, goal setting, and feedback, provided to the experimental group, and usual care to the control group. Data were analyzed using the SPSS WIN 18.0. Results: A higher proportion of patients in the experimental group showed adequate levels of physical activity (p=.001), shorter period of chest tube retention (${\leq}7$ days; p=.011), and shorter stay in the hospital (${\leq}10$ days; p=.036) than patients in the control group. Patients in the experimental group reported longer 6-minute walking distance (p=.032) and lower levels of dyspnea (p=.049) than patients in the control group. The PW did not influence the occurrence of pulmonary complications. Conclusion: The findings of this study suggest that the PW could be a useful strategy for improving patients' post-operative health and reducing cost after lung resection.

• Journal of Plant Biotechnology
• /
• v.5 no.3
• /
• pp.157-161
• /
• 2003

Proline is known as an osmoprotectant accumulating in response to salt and dehydration stresses. An increased level of proline is achieved by either an induced synthesis or a reduced degradation of proline. In an attempt to increase salt tolerance in carrot, a P5CS gene from mothbean was introduced via an Agrobacterium-mediated transformation. The resulting carrot cells and the regenerated plants containing the transgene showed increased levels of proline compared to nontransgenics. The transgenic cell line, Pj2 showed about 6 times increased degree of tolerance determined by relative growth after a treatment in 250 mM NaCl. In facts, due to the retarded growth shown in non-saline condition, Pj2 cells grow only about 1.2 times better than nontransgenic control under salt stress condition. Taken together, it appears that a P5CS is a key enzyme in proline biosynthesis and the increased accumulation of proline by overexpression of the enzyme is enough to enhance tolerance to salt stress in carrot.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.693-698
• /
• 2004

The cyber attacks on the computer system in nowadays are focused on works that do not operate specific application. The main key point that we protect information security system has an access control to keep an application. Most of system has a main function to protect an infrastructure such as hardware, network and operating system. In this paper, we have presented an intrusion tolerance system that can service an application in spite of cyber attacks. The proposed system is based on the middle ware integrating security mechanism and separate function of application and intrusion tolerance. The main factor we use security system in nowadays is service to keep a persistency. The proposed intrusion tolerance system is applicable to such as medical, national defense and banking system.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.38-42
• /
• 2005

The cyber attacks on the computer system in nowadays are focused on works that do not operate specific application. The main key point that we protect information security system has an access control to keep an application. Most of system has a main function to protect an infrastructure such as hardware, network and operating system. In this paper, we have presented an intrusion tolerance system that can service an application in spite of cyber attacks. The proposed system is based on the middle ware integrating security mechanism and separate function of application and intrusion tolerance. The main factor we use security system in nowadays is service to keep a persistency. The proposed intrusion tolerance system is applicable to such as medical, national defense and banking system.

• International Journal of Safety
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2007

Operation of human-centered robot, in general, facilitates the creation of new process that may potentially harm the human operators. Design of safety-guaranteed operation of human-centered robots is, therefore, important since it determines the ultimate outcomes of operations involving safety of human operators. This study discusses the application of geometric tolerance and head injury criteria to safety assessment of human-centered robotic operations. Examples show that extending "Work Area" has more significant effect on the uncertainty in safety than extending the system range in the presence of velocity control.