• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.68.4-68
• /
• 2002

$\textbullet$ This report presents an implementation a set of reusable software components which use of fault-tolerance embedded controller for railway signalling systems. These components can be used in real-time applications without application reprogramming. $\textbullet$ This library runs under VxWorks operating system and is oriented on real-time embedded systems. The library includes fault detection, fault containment, checkpointing and recovery components. $\textbullet$ The library enables to support high-speed response to fault occurrence in application software. Garbage collector together with VxWorks Watchdog provides both dead tasks detection and useless resources removing to avoid an overflow. Control flow...

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.197-199
• /
• 1986

To meet tight tolerance requirements of mass produced shafts which are subcomponents of automobile parts, an automated measuring system has been developed. The system comprises of a non-contact shaft diameter measuring instrument using laser, a feed mechanism of a step motor and ball screw and a personal computer. The system can determine pass-fail of the piece under test and also analyze data for statistical process control.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.594-601
• /
• 2000

Communication Based Train Control System supports the easy maintenance ＆ management and also have the capability to send more informations than the existing one but is less expensive. Tolerance against fault/failure and reliable data transmission are very important issues with this system since it has the responsibility of man's safety. In this paper, we suggested the schemes to support the reliable transmission quality and fault safety. Also we verified through simulation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.267-272
• /
• 1999

In many fields of automation, increasingly high demands are being placed on the availability and fault tolerance of programmable logic controller(PLC). Particularly in fields where a plant shutdown would be extremely expensive. In such cases, only redundant systems can offer the standard of availability required. The redundant configurations contain more then would normally be necessary for the relevant function. Fault tolerant systems will normally continue to operate even if one or more faults cause parts of the control system to fail.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2017

Objectives This study aimed to investigate the effect of Bangkibokryeong-tang (BBT, Fangjifuling-tang) on blood glucose and body fat in high-fat diet-induced obese mice. Methods The experimental animals were divided into five groups- normal diet-fed control (ND), high-fat diet-fed control (HFD), HFD+BBT 75, HFD+BBT 150, and HFD+olistat as a positive drug control group. Markers of obesity, such as body weight, organ weight, diet efficiency, and serum levels of total cholesterol, triglycerides, lipid content, leptin, adiponectin, glutamic oxaloacetic transaminase (GOT)/glutamic pyruvic transferase (GPT)/lactate dehydrogenase (LDH), blood glucose, and insulin, were measured. Furthermore, results of the oral glucose tolerance test and ${\alpha}-glucosidase$ inhibition activity were examined in obese mice. Results Mice treated with BBT demonstrate lower body and organ weight, and reduced weight gain and food efficiency than that in the HFD-only control group. In addition, BBT decreased lipid accumulation in the liver and the levels of enzymes such as GOT, GPT, and LDH in the serum. Furthermore, the levels of triglycerides, total cholesterol, low density lipoprotein (LDL), and leptin were decreased in the serum but the levels of high density lipoprotein (HDL) and adiponectin were increased in the BBT-treated group compared with the control group. The BBT-treated group also demonstrated decreased blood glucose and insulin concentrations induced by feeding on a high-fat diet and improved glucose tolerance. Conclusions Based on the results above, BBT may reduce body fat and hyperglycemia in HFD-induced obesity. This suggests that BBT may be clinically useful in the treatment of obesity.

• Biomolecules & Therapeutics
• /
• v.20 no.2
• /
• pp.220-225
• /
• 2012

To develop a ginseng product possessing an efficacy for diabetes, ginseng radix ethanol extract was treated with pectinase and obtained the GINST. In the present study, we evaluate the beneficial effect of GINST on high fat diet (HFD)-induced hyperglycemia and hyperlipidemia and action mechanism(s) in ICR mice. The mice were randomly divided into five groups: regular diet group (RD), high fat diet group (HFD), HFD plus GINST at 75 mg/kg (GINST75), 150 mg/kg (GINST150), and 300 mg/kg (GINST300). Oral glucose tolerance test reveals that GINST improves the glucose tolerance after glucose challenge. Fasting plasma glucose and insulin levels were decreased by 4.3% and 4.2% in GINST75, 10.9% and 20.0% in GINST150, and 19.6% and 20.9% in GINST300 compared to those in HFD control group. Insulin resistance indices were also markedly decreased by 8.2% in GINST75, 28.7% in GINST150, and 36.4% in GINST300, compared to the HFD control group. Plasma triglyceride, total cholesterol and non-esterified fatty acid levels in the GINST300 group were decreased by 13.5%, 22.7% and 24.1%, respectively, compared to those in HFD control group. Enlarged adipocytes of HFD control group were markedly decreased in GINST-treated groups, and shrunken islets of HFD control mice were brought back to near normal shape in GINST300 group. Furthermore, GINST enhanced phosphorylation of AMP-activated protein kinase (AMPK) and glucose transporter 4 (GLUT4). In summary, GINST prevents HFD-induced hyperglycemia and hyperlipidemia through reducing insulin resistance via activating AMPK-GLUT4 pathways, and could be a potential therapeutic agent for type 2 diabetes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.397-404
• /
• 2011

In this research, wish to suggest method to embody system that can accommodate defect of PLC and find actual propriety. Defect permission control system minimizes production damage because enables repair and checking without discontinuance and improve believability about whole system. Propose duplexing of system to embody this fault tolerant system. Therefore, composed control system that can permit defect or breakdown duplexings of various module proposing this system, and confirms to simulation and actuality kiln of defect permission control system through an application experiment, and compares for mean time between defect by estimate and defect special quality and system configuration of failure(failure) to improve believability of PLC control system together. In proposed system expression method and system mode and relation with operation mode, error discovery mode and switching tube of duplexing mode, and PLC's central processing unit of node study algorithm about master-standby conversion driving and continuous operation of 2 channels method that have 2 that is not one and deduced continuous operation method and result about defect permission in this algorithm and applies this result to actuality kiln control system and confirms continuous operation about PLC defect permission.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.4
• /
• pp.284-291
• /
• 2015

This study was performed to investigate the effects of enhanced light transmission on plant growth, photosynthetic ability, and disease tolerance to leaf blight, anthracnose in ginseng (Panax ginseng C. A. Meyer, Araliacease family) during the early growth stage (April to June). The photosynthetic ratio, stomatal conductance, and stem diameter of plants grown under a shade net with 15% light transmission rate showed an increasing trend compared to the control plants (5% light transmission rate) although the growth of the aerial parts were not influenced significantly. Plant height, stem length, and leaf length of treated plants were not significantly different from those of the control plants. Root parameters, such as root length, diameter, and weight of treated plants increased significantly compared to the control. Yield performance ($187.4kg{\cdot}10a^{-1}$) of treated plants was 55.5% higher than that of the control ($150.4kg{\cdot}10a^{-1}$). Additionally, disease severity scores of treated plants were lower than those of the control plants, revealing higher survival rates. To retain high yield potential and enhance the level of disease tolerance in ginseng, we suggest the increase of light transmission rate during the early growth stage.

• Korean Journal of Human Ecology
• /
• v.23 no.1
• /
• pp.47-61
• /
• 2014

The purpose of this study was to identify the relationship among financial debt burden, psychological factors and financial stress. Data was collected by surveying 450 individuals who were over twenty years old, and 384 were used for the analysis. As the result, first, number of sources of debt, use of each debt, marital status/double income, housing, debt amount and financial stress were found to be significantly different among three groups(debt free, non risky, risky). In addition, marital status/double income, gender, housing and income were found to significantly influence to the probability of being one of the three groups. Second, level of debt burden, age, employment and income were found to significantly influence to financial stress, while psychological factors such as risk tolerance and self-control were not. It might be noteworthy that people in debt were likely to have higher level of stress, while the older, employed, and having higher income were likely to have lower level of stress. This study would provide useful information in terms of debt policy to relieve the financial stress.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.405-411
• /
• 2013

Purpose: In this study, the mounting status of trial case lens was investigated. Methods: We measured distances between geometric center of lens mount and optical center of lens and angle deviations between axis mark on lens and real axis using arbitrary trial case lens sets distributed in Korea, and then, compared those results with international standards. Results: In some of lenses, the prismatic power on geometric center of lens mount and the angle deviations between axis mark and real axis of cylindrical lens were out of tolerance according international standards. Conclusions: The more precise control of the manufacturing process and more thorough quality control for trial case lenses will be required to offer an accurate vision test.