• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1265-1274
• /
• 2018

This paper proposes a virtual flux (VF) and positive-sequence power based control strategy to improve the performance of grid-interfaced three-phase voltage source converters against unbalanced and distorted grid conditions. By using a second-order generalized integrator (SOGI) based VF observer, the proposed strategy achieves an AC voltage sensorless and grid frequency adaptive control. Aiming to realize a balanced sinusoidal line current operation, the fundamental positive-sequence component based instantaneous power is utilized as the control variable. Moreover, the fundamental negative-sequence VF feedforward and the harmonic attenuation ability of a sequence component generator are employed to further enhance the unbalance regulation ability and the harmonic tolerance of line currents, respectively. Finally, the proposed scheme is completed by combining the foregoing two elements with a predictive direct power control (PDPC). In order to verify the feasibility and validity of the proposed SOGI-VFPDPC, the scenarios of unbalanced voltage dip, higher harmonic distortion and grid frequency deviation are investigated in simulation and experimental studies. The corresponding results demonstrate that the proposed strategy ensures a balanced sinusoidal line current operation with excellent steady-state and transient behaviors under general grid conditions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.852-858
• /
• 2013

In numerical control (NC) machining, a machining error in equipment generally occurs for a variety of reasons. If there is a change in direction in the NC code, the characteristics of the automatic acceleration or deceleration function cause an overlap of each axis of the acceleration and deceleration zones, which in turn causes a shift in the actual processing path. Many studies have been conducted for error calibration of the edge as caused by automatic acceleration or deceleration in NC machining. This paper describes a geometric interpretation of the shape and processing characteristics of the operating NC device. The paper then describes a way to determine a feedrate that achieves the desired tolerance by using linear and parabolic profiles. Experiments were conducted by the validate equations using a three-axis NC machine. The results show that the machining errors were smaller than the machine resolution. The results also clearly demonstrate that the NC machine with the developed system can successfully predict machining errors induced with a change in direction.

• Journal of Korean Academy of Nursing
• /
• v.33 no.5
• /
• pp.570-579
• /
• 2003

Purpose: The purpose of this study is to exam the effects of a short-term pulmonary program on lung function, exercise tolerance, and quality of life in chronic lung patients. Method: Randomized controlled pre-post test design was used. The outcome measures were forced expiratory volume in one second (FEV1, % predicted), 6 min walking distance (6MWD), Borg score after 6MWD, and Chronic Respiratory Disease Questionnaire (CRDQ). Experimental group performed the 4-week home-based pulmonary rehabilitation program composed of inspiratory muscle training, upper and lower extremity exercise, relaxation, and telephone visit. Patients in control group were only given education about self-management strategies. Thirty four patients with moderate-to-severe respiratory impairment were recruited, and 28 patients (19 in experiments, 15 in control) completed the study. Result: Significant improvements in lung function, exercise tolerance, and health related quality of life were found only in the experiment group. Conclusion: This study yielded evidence for the potential and beneficial effects of home-based pulmonary rehabilitation program in patients with moderate to severe chronic lung disease. The program could be adequately utilized for improvement of health related quality of life in chronic lung patients.

• Biomolecules & Therapeutics
• /
• v.7 no.4
• /
• pp.342-346
• /
• 1999

This study was performed to investigate the effect of cyclosporine (CsA) on glucose tolerance and peripheral insulin sensitivity in normal Sprague-Dawley rats. After daily treament of CsA (10 mg/kg, i.p.) for two weeks, glucose tolerance tests were carried out by the treatment of glucose (Glu, 2 g/kg, i.p.) alone or in conjunction with exogenous insulin (Ins; human regular insulin, 5 U/kg, s.c.) and measured the decrement of area under the time-plasma glucose concentration curve ($AUC_{o\longrightarrow120}$; g.min/ml) by the trapezoidal rule. The rats were divided into three groups (Glu- (Control), Ins+Glu- and CsA+Ins+Glu-, n=7 in each group). The $AUC_{o\longrightarrow120}$ of the CsA+Ins+Glu-group was significantly (p<0.01) lower than that of Glu-group (61.0% of control) and significantly (p<0.05) higher than that of Ins+Glu-group (197.4% of Ins+Glu-). The CsA+Ins+Glu- grou showed higher levels of maximal blood glucose concentration and higher $AUC_{o\longrightarrow120}$ than those of Ins+Glu-group in normal rats. Besides direct pancreatic toxicity of CsA previously reported (Hahn et al., 1972), these results suggest that CsA also make the possibility to induce peripheral insulin insensitivity and glucose intolerance in normal rats.

• BMB Reports
• /
• v.30 no.1
• /
• pp.21-25
• /
• 1997

The growth. freezing resistance and electrophoretic protein patterns of carrot callus cultures were investigated following treatment with NaCl for various' intervals at 20$^{\circ}C$. Following 7 day exposure to 250 mM NaCl. freezing tolerance increased, which was measured by 2.3.5-triphenyl tetrazolium chloride (TTC) assay and fresh weight was reduced compared to control cells. Changes of electrophoretic patterns of total and boiling stable proteins were investigated using one or two dimensional gel system. Several proteins with molecular weight of 43 and 21 kDa increased by NaCl treatment. The most prominent change was detected in 21 kDa protein. The steady state level of this protein increased in NaCl treated cells, but decreased in control cells. Twenty one kDa protein was detected only in the NaCl treated cell when boiling stable protein was analyzed. The isoelectric point of 21 kDa protein was identified as 5.7. The timing of increase of 21 kDa protein was correlated to freezing resistance which implied the role of this protein in the induction of freezing resistance of the cell.

• Advances in Traditional Medicine
• /
• v.7 no.2
• /
• pp.205-210
• /
• 2007

The objectives of the study were (1) To evaluate the safety and tolerability of Damtab. (2) To characterize hypoglycemic effect of Damtab, if any. (3) To evaluate insulin sensitivity effect of Damtab, if any. Hypoglycemic effect of Damtab (700 mg and 1,400 mg) were examined. Gliclazide (80 mg) was used as an active control. Placebo was used as control. Breakfast was given, half an hour before dosing whereas lunch, snacks and dinner were given at 6, 10 and 14 h post dose. An oral glucose tolerance test was conducted to calculate the insulin sensitivity index from the values of glucose and insulin during oral glucose tolerance test. Both giclazide 80 mg and Damtab 1,400 mg significantly lowered plasma glucose level up to 6 h. Insulin sensitivity index of Damtab (1,400 mg) was found to be similar to that of placebo. A significant increase in insulin level at 1 h post dose of Damtab (1,400 mg) was observed. Damtab 700 mg shows placebo like effect whereas Damtab 1,400 mg possesses hypoglycemic effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.233-243
• /
• 1999

Food safety or sanitation are terms broadly applicable to procedures designed to ensure that food quality is high and free of factors which may adversely affect human health. These factors include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. Use of drugs in animal production for the treatment and control of animal diseases, to promote growth rate, and to improve feed conversion efficiency has expanded year by year, thus increasing the possibilities for occurrences in animal products of residues harmful to humans. Governmental agencies have made efforts to control or prevent residue problems. The Korean Food and Drug Administration (KFDA) is charged with the responsibility of establishing tolerances for veterinary drugs, pesticides, and mycotoxins and other non-pharmaceutical substances. The Department of Veterinary Service is responsible for establishing guidelines regarding withdrawal times of drugs, approval of drugs, their uses, and sanitation enforcement of livestock products. The authors describe the toxicological basis for the establishment of tolerance levels for xenobiotics and the pharmacokinetic basis for establishing withdrawal time for veterinary drugs. The regulatory tolerance levels of chemicals in pork and swine feed, Korean regulations on the use of feed additives, rapid residue test methods, the National Residue Program, and the Food Animal Residue Avoidance Databank are discussed. Rapid EIA methods that are under development for the screening of live animals are described These methods predict tissue residues from an examination of blood samples taken from pigs before they are slaughtered.

• Plant Resources
• /
• v.3 no.1
• /
• pp.71-78
• /
• 2000

Autotoxicity restricts reseeding of new alfalfa(Medicago sativa L.) after alfalfa until autotoxic chemical(s) breaks down or is dispersed into external environments, often requiring up to a year or more. One solution for reducing autotoxicity would be to select germplasms or cultivars with tolerance to the autotoxic chemical(5) and use genetically breeding program. Bioassay of seed germination and early seedling growth was conducted to evaluate autotoxic responses of 3 varieties of alfalfa to the water-soluble extracts(at 4 and 8g/L) from alfalfa ‘Cody’leaf by using agar and filter paper medium in a petri-dish assay. Root length at 5 days after seeding was more sensitive to the extract than was hypocotyl length or seed germination, and was a better parameter of autotoxic effects of alfalfa leaf extracts. Use of an agar medium gave better sensitivity of root length than did use of filter paper. Evaluating tolerance with percent of control was more important indicator than was mean of root length because of significant variation among varieties in root length of control treatment. Bioassay ranked varieties in the following order of tolerance on the basis of relative root length; “Cody” >“ Pioneer 5373” >“ Alfagraze”. Seedling growth from old “Cody” seed was more sensitive to the autotoxic chemical(5) than was that from newly produced seed.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.3
• /
• pp.151-156
• /
• 1994

Acifluorfen-tolerant cell lines of S, ptycanthum were isolated by stepwise selection using suspension culture. Growth of unselected line was completely inhibited at $0.5\;\mu\textrm{M}$, while some selected lines grew at $8\;\mu\textrm{M}$ acifluorfen. After subculturing on acifluorfen-free medium for 4 passages, six of the eleven cell lines screened and maintained their tolerance to $2\;\mu\textrm{M}$ acifluorfen. The regeneration capacity of selected cell lines in Solanum ptycanthum differed depending on the tell line. The acifluorfen tolerance of the somarclones regenerated from acifluorfen-tolerant cell lines differed depending on the somarclone. When plants were heated with $16\;\mu\textrm{M}$ acifluorfen, unselected control plane had over 75% phytotoxicity Many selected cell lines had less phytotoxicity than the seed-grown control plants. Tolerance to acifluorfen was inherited to the self-pollinated progenies. The inheritance patterns differed depending on the clone. Acifluorfen tolerance was inherited as a semidominant trait. Other segregation patterns were also observed. acifluorfen tolerance was recessive and acifluorfen sensitivity was dominant.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.244-250
• /
• 2001

This study was conducted to determine the change in freezing tolerance of Chinese cabbage (Brassica campestris L. ssp. penkinensis). Four-week old seedlings grown in a greenhouse at $25^{\circ}C$$\pm$0.5 were transferred to 5, 10 or 15$^{\circ}C$ condition for acclimation for one day, and then transferred to a lethal temperature of -3$^{\circ}C$ condition. Optimal acclimation temperatures were 5$^{\circ}C$ and 1$0^{\circ}C$. Freezing tolerance of leaf tissues was investigated during a week-long cold stress. Development of freezing tolerance was shown by survival ratio, and amounts of total RNA, soluble protein and soluble sugar. LT$_{50}$ value increased from -3 to -4$^{\circ}C$ after 5 days acclimation at 5 or 1$0^{\circ}C$, and this was considered to be the first indication of enhanced freezing tolerance. Plants, cold acclimated for five days, reached to a survival ratio of 60%. This increase in freezing tolerance was found to be associated with the increased levels of total RNA, soluble sugar and soluble protein. These metabolic changes imply the association of adjustment of growth and cell metabolism with low temperatures at the beginning of cold acclimation in chinese cabbage.e.