• 설비공학논문집
• /
• 제23권5호
• /
• pp.342-348
• /
• 2011

This study analyzes the current and after retrofit energy consumption of lighting and cooling system of a superstore in Seoul. Energy consumption data were measured and collected with a measurement system. Annual energy consumption was calculated using TRNSYS program. After replacing lighting and chiller with higher efficiencies, annual TOE consumption decreased from 1,066 before retrofit to 832 after retrofit, saving 234 TOE (22%) in total. Similarly, total annual $TCO_2$ consumption decreased from 2,214 to 1,721, reducing 493 $TCO_2$ (22%) during this pilot study.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.146-153
• /
• 2004

We compared the fatigue characteristics of weld metal with those of base metal, and not heat-treated with heat-treated. Also, we examined the influence of bead in a viewpoint of fatigue life. From the experimental results, it has been seen that the fatigue characteristics of welded specimens grinded the toe of bead are slightly better than not grinded. We have seen that the fatigue life is affected more by the stress concentration on the profile change in the weld toe rather than by residual stress influence, because heat-treated or not had almost no influence on the fatigue characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.193-195
• /
• 2006

In this study, we developed an active controlled ankle-foot orthosis(AAFO) which can control the dorsiflexion/plantarflexion of the ankle joint during gait to prevent foot drop and toe drag for paralysis patients. To prevent dropping foot after heel strike, ankle joint was actively controlled to minimize forefoot collision with the ground. It was also controlled to provide toe clearance and to help push-off during late stance. The 3D gait analysis was performed on two healthy subjects equipped with the developed AAFO to compare with the normal gait and the conventional AFO gait. In the developed AAFO gait, differently from the conventional AFO gait, significant push-off was observed during pre-swing and the maximum flexion moment during pre-swing phase was similar to that of normal gait. A remarkable dorsiflexion also occurred during initial swing. These results indicated that the developed AAFO could have certain clinical benefits to prevent foot drop for paralysis patients, compared to conventional AFOs.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.343-350
• /
• 1999

Orthotropic steel bridge decks are potentially liable to cause fatigue cracks due to weld defects, residual stresses, and in-plane or out-of-plane stresses. In particular, the cracks propagated through deckplate in longitudinal rib to deckplate joints occur at weld toe and weld root due to stress concentrations. Numerical parametric studies are performed to show the Influence of the parameters on the stress concentration at the connection between the longitudinal rib and the deckplate. The parameters include root gap, toe angle $\theta$, toe radius $\rho$, and weld penetration. This study provides a fundamental point for the improvement of fatigue resistance and the estimation of the fatigue crack propagation in wekded joint details.

• 대한족부족관절학회지
• /
• 제12권2호
• /
• pp.220-223
• /
• 2008

Osteochondroma is the most common benign bone tumor which commonly occurs in the metaphysis of the long bones such as proximal humerus, tibia, and distal femur. It is rarely found in bones of the foot. Although they are benign lesions, when they occur in the foot, they are typically identified earlier than other regions because of the low proliferation of subcutaneous tissue in the region and may cause symptoms. We experienced a rare case of osteochondroma in a 60-year-old male which cause pain and swelling of the fourth toe.

• 대한족부족관절학회지
• /
• 제10권2호
• /
• pp.279-283
• /
• 2006

Irreducible dislocation of great toe interphalangeal joint with incarcerated sesamoid is a rare condition, with only a few cases reported in literature. We describe two cases of dislocation of interphalangeal joint which were diagnosed by plain radiographs and three dimensional computed tomography (3D-CT) and successfully treated with open reduction without excision of sesamoid through dorsal approach along with literature pertinent to this condition.

• 대한족부족관절학회지
• /
• 제17권1호
• /
• pp.68-73
• /
• 2013

Bizarre parosteal osteochondromatous proliferation (BPOP) is an rare benign tumor which involve mostly tubular bones of feet and hand. BPOP has clinical, radiographic, and histologic similarities with osteochondroma.Radiologically, BPOP has not central continuity with underlying osseous medulla. Histologically, the lesion has marked proliferative activity, and enlarged, bizzare, and binucleated chondrocytes.Despite the high risk of recurrence, treatment of choice is surgical resection. This report presents two cases of BPOP of the big toe with reviews of clinical, radiographic, and histological characteristics.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.115-118
• /
• 1996

1. The crack is inifiated at a toe notch and reptured for the skip and continuous welding. 2. Fatigue life of continuous welding is greater than that of skip welding and fatigue life of 2pad continuous welding appears 1.7 times more than that of pad continuous welding. 3. For the skip and continuous welding, fatigue than that of welding materials appears shorter than that of welding materials because of the effect of plastic strain and compressive residual stresses at the crack tip, which are generated by the over loading. 4. Inter-relationship between da/dN-ΔK and delayed phenomenon increases linearly at the state growth area of heat effect section for the skip and continuous welding.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.186-193
• /
• 1999

In this paper, a full vehicle model is developed to analyze toe and camber changes due to rack height variation and compliance. The AutoDyn7 program developed in G7 project is used for the computer simulation. Steady state cornering test was done to find the understeer gradient. Imposing a pulse steer input, Frequency Response Function(FRF) of yaw rate and lateral accelerations were evaluated. To verify the stability, the rhombus using four parameters is employed. Steer characteristics were evaluated by changing the rack height and the bushing lateral stiffiness. which installed between the low control arm and the chassis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2747-2749
• /
• 2003

Security is concerned with the protection of assets from threats, where threats are categorised as the potential for abuse of protected assets. All categories of threats should be considered, but in the domain of security greater attention is given to those threats that are related to malicious or other human activities ISO/IEC 15408 requires the TOE(Target of Evaluation) Security Environment section of a Protection Profile(PP) or Security Target(ST) to contain a list of threats about the TOE security environment or the intended usage of the TOE. This paper presents a specific physical threats should be considered in the smart card PP which developers of smart card PP must consider.