• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.590-597
• /
• 2011

The IDRS provides detection, classification and bearing/range estimation by performing wavefront curvature analysis on an intercepted active transmission from target. Especially, a estimate of the target bearing/range that significantly affects the optimal operation of own submarine is required. Target bearing/range can be estimated by wavefront curvature ranging which use the difference of time arrival at sensors. But estimation ambiguity occur in bearing/range estimation due to a number of peaks caused by high center frequency and limited bandwidth of the intercepted active transmission and distortion caused by noise. As a result the bearing/range estimation performance is degraded. To estimate target bearing/range correctly, bearing/range estimation method that eliminate estimation ambiguity is required. In this paper, therefore, for wavefront curvature ranging, NLS cost function with curve fitting method is proposed, which provide robust bearing/range estimation performance by eliminating estimation ambiguity. Through simulation the performance of the proposed bearing/range estimation methods are verified.

• Journal of Korean Academy of Nursing
• /
• v.41 no.6
• /
• pp.750-757
• /
• 2011

Purpose: Cost-benefit analysis is one of the most commonly used economic evaluation methods, which helps to inform the economic value of a program to decision makers. However, the selection of a correct benefit estimation method remains critical for accurate cost-benefit analysis. This paper compared benefit estimations among three different benefit estimation models. Methods: Data from community-based chronic hypertension management programs in a city in South Korea were used. Three different benefit estimation methods were compared. The first was a standard deterministic estimation model; second, a repeated-measures deterministic estimation model; and third, a transitional probability estimation model. Results: The estimated net benefit of the three different methods were $1,273.01, $-3,749.42, and $-5,122.55 respectively. Conclusion: The transitional probability estimation model showed the most correct and realistic benefit estimation, as it traced possible paths of changing status between time points and it accounted for both positive and negative benefits.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1441-1461
• /
• 2017

Nowadays, Dynamic Adaptive Streaming over HTTP (DASH) has become very popular in streaming multimedia contents. In DASH, a client estimates current network bandwidth and then determines an appropriate video quality with bitrate matching the estimated bandwidth. Thus, estimating accurately the available bandwidth is a significant premise in the quality of video streaming, especially when network traffic fluctuates substantially. To cope with this challenge, researchers have presented various filters to estimate network bandwidth adaptively. However, experiment results show that current schemes either adapt slowly to network changes or adapt fast but are very sensitive to delay jitter and produce sharply changed estimation. This paper presents a novel bandwidth estimation scheme based on Moving Average Convergence Divergence (MACD). We applied an MACD indicator and its two thresholds to classifying network states into stable state and agile state, based on the network state different filters are applied to estimate network bandwidth. In the paper, we studied the performance of various MACD indicators and the threshold values on bandwidth estimation. Then we used a DASH proxy-based environment to compare the performance of the presented scheme with current well-known schemes. The simulation results illustrate that the MACD-based bandwidth estimation scheme performs superior to existing schemes both in the speed of adaptively to network changes and in stability in bandwidth estimation.

• Journal of Information Technology Applications and Management
• /
• v.10 no.3
• /
• pp.75-92
• /
• 2003

In order to investigate IS(Information Systems) outsourcing cost estimation model preference of firms, this study reviews previous literatures on outsourcing and firm characteristics. The relationships between firm characteristics and IS outsourcing cost estimation model preference are analysed. Four major factors of firms characteristics are found and classified. IS outsourcing cost estimation model with SLA are found to have a strong relationship with organizational culture. Future research will be needed to verify the result of this exploratory study.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3E
• /
• pp.25-30
• /
• 2001

In angle of arrival estimation, the direction of a signal is usually assumed to be a point. If the direction of a signal is distributed due to some reasons in real surroundings, however, angle of arrival estimation techniques based on the point source assumption may result in poor performance. In this paper, we consider angle of arrival estimation when the signal sources are distributed. A parametric source model is proposed, and the estimation techniques based on the well-known maximum likelihood technique is considered under the model. In addition, Various statistical properties of the estimation errors were obtained.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.7
• /
• pp.2328-2344
• /
• 2022

2D human pose estimation still faces difficulty in low-resolution images. Most existing top-down approaches scale up the target human bonding box images to the large size and insert the scaled image into the network. Due to up-sampling, artifacts occur in the low-resolution target images, and the degraded images adversely affect the accurate estimation of the joint positions. To address this issue, we propose a multi-resolution input feature fusion network for human pose estimation. Specifically, the bounding box image of the target human is rescaled to multiple input images of various sizes, and the features extracted from the multiple images are fused in the network. Moreover, we introduce a guiding channel which induces the multi-resolution input features to alternatively affect the network according to the resolution of the target image. We conduct experiments on MS COCO dataset which is a representative dataset for 2D human pose estimation, where our method achieves superior performance compared to the strong baseline HRNet and the previous state-of-the-art methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.332-338
• /
• 2022

This study proposes a battery state-of-health estimation method by applying a feature extraction technique. The technique that can improve estimation performance is the process of identifying and extracting meaningful data. To apply a data-driven-based aging state estimation method to batteries, health indicators are used as training data. However, limitations occur in extracting health indicators from charge/discharge cycles. This study proposes a deep-learning-based battery state-of-health estimation method that applies feature extraction techniques to compensate for this problem. According to the performance evaluation result of the proposed method, it has a low estimation error of 0.3887% based on an absolute error evaluation method.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.113-119
• /
• 2023

In this paper, we propose an optimization of a pose estimation deep learning model for recognition of abnormal behavior in unmanned stores using radio frequencies. The radio frequency use millimeter wave in the 30 GHz to 300 GHz band. Due to the short wavelength and strong straightness, it is a frequency with less grayness and less interference due to radio absorption on the object. A millimeter wave radar is used to solve the problem of personal information infringement that may occur in conventional CCTV image-based pose estimation. Deep learning-based pose estimation models generally use convolution neural networks. The convolution neural network is a combination of convolution layers and pooling layers of different types, and there are many cases of convolution filter size, number, and convolution operations, and more cases of combining components. Therefore, it is difficult to find the structure and components of the optimal posture estimation model for input data. Compared with conventional millimeter wave-based posture estimation studies, it is possible to explore the structure and components of the optimal posture estimation model for input data using genetic algorithms, and the performance of optimizing the proposed posture estimation model is excellent. Data are collected for actual unmanned stores, and point cloud data and three-dimensional keypoint information of Kinect Azure are collected using millimeter wave radar for collapse and property damage occurring in unmanned stores. As a result of the experiment, it was confirmed that the error was moored compared to the conventional posture estimation model.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.949-959
• /
• 2013

Since the recent launch of Microsoft Xbox Kinect, research on 3D human pose estimation has attracted a lot of attention in the computer vision community. Kinect shows impressive estimation accuracy and real-time performance on massive graphics processing unit hardware. In this paper, we focus on further reducing the computation complexity of the existing state-of-the-art method to make the real-time 3D human pose estimation functionality applicable to devices with lower computing power. As a result, we propose two simple approaches to speed up the random-forest-based human pose estimation method. In the original algorithm, the random forest classifier is applied to all pixels of the segmented human depth image. We first use a multi-scale approach to reduce the number of such calculations. Second, the complexity of the random forest classification itself is decreased by the proposed cascade approach. Experiment results for real data show that our method is effective and works in real time (30 fps) without any parallelization efforts.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.203-211
• /
• 2020

This study proposes a method for estimating gender and age that is robust to various external environment changes by applying deep learning-based learning. To improve the accuracy of the proposed algorithm, an improved CNN network structure and learning method are described, and the performance of the algorithm is also evaluated. In this study, in order to improve the learning method based on CNN composed of 6 layers of hidden layers, a network using GoogLeNet's inception module was constructed. As a result of the experiment, the age estimation accuracy of 5,328 images for the performance test of the age estimation method is about 85%, and the gender estimation accuracy is about 98%. It is expected that real-time age recognition will be possible beyond feature extraction of face images if studies on the construction of a larger data set, pre-processing methods, and various network structures and activation functions have been made to classify the age classes that are further subdivided according to age.