• Culinary science and hospitality research
• /
• v.8 no.1
• /
• pp.125-147
• /
• 2002

This study is to show the importance of customer and to define the customer's meaning in food industry. According to previous research, a consumer is a very small part of customer. At present and in the future, a customer is not only a consumer but all of interior and exterior environments related to a company. However the scope of customer has been extended eventually. Therefore, it is important for a company to find out and secure the proper customer giving profit. This study considers a relative marketing as a way to impress a customer. It is a useful marketing technology to make profits and company's growth. And to achieve a relative marketing successfully, it is necessary to perceive a fundamental understanding and building an organization for workers. Therefore, this study propose that a company would accomplish followings to continue a quality growth. First, Understanding and confidence about workers. Second, Building the culture of a company's organization impressive to a customer Third, Continuing effort and interest ing about service. In conclusion, a company will accomplish a customer satisfaction successfully through developing a service organization and performing relative marketing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1179-1182
• /
• 2011

RC servos are electro-mechanical devices that respond to a control signal, which instructs them to move their output shaft to a certain position. A servo is normally plugged into a radio receiver with a three pin connector. The three wires are a power (usually 4.8V to 6.0V), a ground, and a signal wire. The signal wire carries a PWM (Pulse-Width Modulation) signal consisting of a 1-2msec pulse repeated 50 times a second. A 1.5msec pulse will tell the servo to move to its output shaft to the center position, 0 degrees. For a servo with a 180 degree of motion, a 1msec pulse will move the servo to -90 degrees, and a 2msec pulse will move the servo to +90 degrees. In order to development a humanoid robot, mechanical design, fixtures design, analysis of kinematics, implementation moving program, selection of RC servo motor and controller are required. This study was performed to experimentally compare the rotation range of RC servo motors according to change of a periods.

• Culinary science and hospitality research
• /
• v.8 no.2
• /
• pp.133-151
• /
• 2002

It is not the time when foodservice operations in Korea envy worldwide foodservice operations. For our foodservice operations to survive unlimited competition we do not wait for strong brand to be made, but make a worldwide brand through systematic tactics and strategy. To be a worldwide first-class foodservice operation we have to make first-class food products and a first-class brand accordingly. Brand has a power to lighten the future of a company and is in the limelight as a being to be attracted an attention from an invisible being. Brand is considered as a means to all the foodservice operations which invests enormous fund and time, and is appeared as a powerful weapon. It is not too much to say that 21st century is a marketing era centering on a brand. But this brand may be changed its property by various environment and changes. On the other hand it may be disappeared. Therefore more attention must be paid continuously about strategic actions to manage the brand. Now all companies can't promise to succeed without a powerful brand. The fact is that a worldwide brand to be made and developed is necessary. Also If not to do so it is very difficult to survive permanently.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.434-445
• /
• 2015

In reading news stories online, people are exposed to others' comments to a news story. In spite of popularity of comments to a news story online, the understanding of why and who posts a comment is still lacking. To complement scarcity and have a better understanding of comment-posting online, this study examined psychological factors which affect the likelihood of posting a comment to a news story online. In particular, three variables were considered: The first variable was communication efficacy, that is, an individual's belief about communication practices and systems, under the supposition that the people who have greater levels of communication efficacy are more likely to post a comment. The second variable was perception of public opinion, to test that when and if people judge their position of the issue as favored by the majority, they tend to post a comment. And finally, the tone of existing comments was included, to test if the tone of comments affects the willingness to post a comment. The results showed that firstly, people at a high level of communication efficacy are more likely to post a comment compared to people at the low level of communication efficacy. Secondly, the perception of public opinion partly influenced the willingness to post a comment. Especially, when people believe communication systems contribute to develop society and also when judged that their opinion is the majority's opinion, they are more likely to post a comment. Finally, the tone of the comments influenced the willingness to post a comment only on the condition that people are confident of the communication practice and are exposed to emotional comments.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.247-260
• /
• 2021

Data modeling is a process of developing a model to design and develop a data system that supports an organization's various business processes. A conceptual data model represents a technology-independent specification of structure of data to be stored within a database. The model aims to provide richer expressiveness and incorporate a set of semantics to (a) support the design, control, and integrity parts of the data stored in data management structures and (b) coordinate the viewing of connections and ideas on a database. The described structure of the data is often represented in an entity–relationship (ER) model, which was one of the first data-modeling techniques and is likely to continue to be a popular way of characterizing entity classes, attributes, and relationships. This paper attempts to examine the basic ER modeling notions in order to analyze the concepts to which they refer as well as ways to represent them. In such a mission, we apply a new modeling methodology (thinging machine; TM) to ER in terms of its fundamental building constructs, representation entities, relationships, and attributes. The goal of this venture is to further the understanding of data models and enrich their semantics. Three specific contributions to modeling in this context are incorporated: (a) using the TM model's five generic actions to inject processing in the ER structure; (b) relating the single ontological element of TM modeling (i.e., a thing/machine or thimac) to ER entities and relationships; and (c) proposing a high-level integrated, extended ER model that includes structural and time-oriented notions (e.g., events or behavior).

• Journal of the Korean Mathematical Society
• /
• v.59 no.5
• /
• pp.997-1013
• /
• 2022

In this paper we give conditions on a matrix which guarantee that it is similar to a centrosymmetric matrix. We use this conditions to show that some 4 × 4 and 6 × 6 Toeplitz matrices are similar to centrosymmetric matrices. Furthermore, we give conditions for a matrix to be similar to a matrix which has a centrosymmetric principal submatrix, and conditions under which a matrix can be dilated to a matrix similar to a centrosymmetric matrix.

• Korean Journal of Hospice Care
• /
• v.2 no.1
• /
• pp.1-20
• /
• 2002

The purpose of this study is to develop a management model to effectively provide hospice service of nursing home. In a method of study to achieve this purpose, a positive research and literature study have been performed at the same time. Concerning contents to be examined as a definition of notions and patterns about hospice for the aged, foreign hospice and structural elements of hospice management, a literature study to support a theoretical background has presented leading studies as an analysis form of this study through analyzing domestic and foreign literature, thesis, journal and so on. In order to attain the purpose of this study, the positive research is to carry out a survey of demand and desire of people who have already got hospice service in the first place as a fact-finding survey related to the subject of hospice service, investigate organizations to operate nursing home and hospice and relevant experts in the second place as a survey of supply system to provide hospice service, and develop an appropriate management model to connect the demand and supply of nursing home through it. Therefore, this study has developed a delivery system and a chart of the practical trend to be done minutely, presenting a model to manage a hospice of nursing home based on the above results. The management model externally has connected medical team of hospital with hospice team of home based on a community, and internally is composed centering on five elements such as administrative organization, manpower, program and contents of service, finances. In practical model of hospice management of nursing home, in order to plan a program, provide service and give a high-quality service to the aged, this study has presented a trend chart of service management on the basis of five structural elements, an analysis form of this study. In conclusion, this study could present data to develop a hospice in the field of nursing home for the aged by showing a model concerning a hospice management of nursing home, but in my opinion, a following study to be detailed and developed even more than this study should be continued.

• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• Journal of architectural history
• /
• v.10 no.1 s.25
• /
• pp.25-40
• /
• 2001

Since the 17th century, the society of Chosun Dynasty belonged to a period of rapid transition in many fields. As the building is a result produced on the basis of a society and economy, the general transition in a society is to be reflected into a process of building construction. Therefore an understanding or estimate of a building can be guaranteed by research of a process of building construction. Economic base factors in its process consist of material, cost, manpower, and operation system, etc. to be committed to the construction. On the premise, this paper is to examine the production of wood members and the calculation of the amount of raw woods in a process of woodwork in the construction of the government managed buildings in the late of Chosun dynasty. Construction reports, job slips, written estimates, and other documents in those days are examined for the study. To classify raw woods according to a standard size was aimed to a material management appropriately to apply each them to building size or its member size. The way to select a list of raw woods applicable to each member size, and to calculate the amount of the demanded wood was much more improved with 'Injungjeon-yeongkweon' in the year 1805 at the turning point than 'Hwaseong-seongyuk' in the year 1796. The improvement of material management brought to overcome a shortage of the amount supplied from forest preserve, and to a rationalization of building construction.

• International Journal of Knowledge Content Development & Technology
• /
• v.3 no.2
• /
• pp.67-94
• /
• 2013

This exploratory research explores the concept of a digital legacy as a general concept and as a collection of digital possessions with unique characteristics. The results reported in this article are part of a larger study. In Cushing (2013), the author identified the characteristics of a digital possession. In this study, these characteristics of a digital possession were utilized to explore how the characteristics of several digital possessions could form a collection, or a digital legacy. In addition to being explored as a collection of digital possessions, data was collected about the general concept of a digital legacy. In part I of the study, 23 participants from three age groups were interviewed about their general concept of a digital legacy. Five general characteristics describing a digital legacy were identified. In part II of the study, interview data from Cushing (2013) was used to create statements describing digital possessions. The statements were classified utilizing the archival concept of primary and secondary values, as well as the consumer behavior concepts of self extension to possessions and possession attachment. Primary value refers to the purpose for which the item was created, while secondary value refers to an additional value that the participants can perceive the item to hold, such as a perception that an item can represent one's identity. Using standard Q method procedure, 48 participants were directed to rank their agreement with 60 statements (written on cards), along a distribution of -5 to +5, according to the characteristics of the digital possession they would most like to maintain for a digital legacy. The ranked statements were analyzed using Q factor analysis, in order to perceive the most common statements associated with maintaining digital possessions for a digital legacy. Q method results suggested that most individuals described the digital possessions they wanted to maintain for a digital legacy using various combinations of characteristics associated with primary and secondary values. This suggests that while some participants will respond to personal archiving based on the concept of preserving identity (a perceived secondary value), this will not appeal to everyone. Information professional could consider this difference in appeal when marketing personal archiving assistance to patrons.