• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.975-980
• /
• 1991

Chelated titanium alkoxides are hydrolysed showly and stable enough to prepare multicomponent gels of titania without its precipitation due to the fast hydrolysis of Ti alkoxide. The alkoxy groups of chelated titanium alkoxide are hydrolysed as fast as that of titanium alkoxide but the chelating groups are stable even in aqueous solution. The chelating groups showed different rates of hydrolysis in aqueous ammonia solution and water added one. Those rates were monitored with UV-VIS spectrophotometer by using their unique absorption bands before and after hydrolysis.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.59-64
• /
• 1998

In order to lower porosity of the porous silica, titanium alkoxide solution was filled in the pore of silica in the heating-vacuum condition. The specific surface area of modified samples was decreased effectively from 900 m$^2$/g to 100 m$^2$/g. (The aggregation phenomena in modified samples were improved fairly.) Samples were heated at 600 , and then the titanium alkoxide in the pore was decomposed completely to titanium oxide from TGA-DTA measurement. From SEM result, it was evident that titanium oxide did not coat the surface of the silica. The modified samples were analyzed using SEM, DTA-TGA, BET, and UV-visible spectrometer.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.509-514
• /
• 1999

The systematic modification of titanium(IV) isopropoxide with acetic acid as a organic additive was done and identifided by FT-IR, $^1H$, $^{13}C$ NMR and UV-Vis spectroscopy. The structure was cbanged after hydrolysis-condensation reaction and drying process. The hydrolysis-condensation rates of modified Ti alkoxide with acetic acid were investigated by $^1H$ NMR spectroscopy. This modified Ti(IV) alkoxide was less reactive toward hydrolysis-condensation reaction than $Ti(OPr^i)_4$, which can be attributed to the stable ligand structure between Ti alkoxide and ligand. The structural change on obtained from gel powders with heat treatment was also observed by FT-IR spectroscopy.

• Macromolecular Research
• /
• v.17 no.5
• /
• pp.346-351
• /
• 2009

$TiCl(O-i-Pr)_3/SiO_2$ and $Ti(O-i-Pr)_4/SiO_2$ were prepared by immobilizing chlorotitanium (IV) isopropoxide ($TiCl(O-i-Pr)_3$) and titanium (IV) isopropoxide ($Ti(O-i-Pr)_4$), to pretreated silica. The effect of the polymerization reaction conditions on the catalytic activity and characteristics of the resulting PLA were investigated. The catalytic conversion, molecular weight and polydispersity index (PDI) of the PLA produced on the titanium alkoxide supported catalysts increased proportionally with the reaction temperature. When the PLA was synthesized in bulk polymerization, the PLA produced with the supported catalysts had higher molecular weight than those with homogeneous catalysts. The melting temperature of the polymer produced with silica supported alkoxide catalysts was approximately $170-180^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.29-39
• /
• 1996

silica의 precursor로 TMOS를 사용하여 autoclave 내에서 supersritical drying으로 투명한 TiO2-SiO2 이성분계 aerogle을 얻을 수 있었다. 반응성이 뛰어난 titanium alkoxide의 중축합반응을 억제할 수 있는 강한 산성 영역에서 투명한 Aerogel을 얻을 수 있었으며, 물을 직접 첨가하지 않고 silicon alkoxide의 축합반응의 부산물인 물을 이용하여 titanium alkoxide의 반응성을 제어했을 때 투명성이 더욱 증진되었다.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.436-438
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2637-2642
• /
• 2009

In this present paper, we prepared $MWCNT/TiO_2$ composites by using pre-oxidized multi-walled carbon nanotubes (MWCNTs) with different titanium alkoxide precursors in benzene solvent. The composites were comprehensively characterized by BET surface area, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and UV-Vis absorption spectroscopy. The photoactivity of the prepared materials, under UV irradiation, was tested using methylene blue (MB) in aqueous solution. Finally, according to the results of MB removal experiment, it can be considered that the MB degradation infect mainly caused by photocatalytic effect of $TiO_2$. Furthermore, the bactericidal test of the composites was also determined. It was indicated that $MWCNT/TiO_2$ composites with sunlight had greater effectiveness for B. cereus, S. aureus and E. coli than any other experimental conditions.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.234-241
• /
• 2009

In this study, CNT/$TiO_2$ composites derived from various titanium alkoxides and multiwalled carbon nanotubes (MWCNTs) were synthesized and characterized. Surface areas and pore volumes of the CNT/$TiO_2$ samples showed catastrophic decrease due to deposition of titanium compounds. Scanning electron microscopy (SEM) results indicated that the MWCNTs were homogenously decorated and well-dispersed onto/into the composites without apparent agglomeration of $TiO_2$ particles. In the X-ray diffraction (XRD) patterns, peaks of anatase and rutile phase were observed. The energy dispersive X-ray spectroscopy (EDX) spectra revealed the presence of major elements such as C and O with strong Ti peaks. According to the photocatalytic results, MB removal by a treatment with CNT/$TiO_2$ composites seems to have an excellent removal effect as order of CTIP, CTNB and CTPP composites due to a photolysis of the supported $TiO_2$, the radical reaction and the adsorptivity and absorptivity of the MWCNTs.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.691-697
• /
• 1999

TiO2 powder was adsorbed on the surface of mica using the heterocoagulation method in water TiO2 powder was prepared from hydrolysis of titanium-iso propoxide in a mixed solvent of anhydrous ethanol and water. When the molar ratio of water to titanium iso-propoxide was 0.25 monodispersed spherical TiO2 particles were obtained. The prepared TiO2 powder showed anatase phase after heat treatment at 50$0^{\circ}C$ for 2 h and then transformed to rutile phase after heat treatment at 100$0^{\circ}C$ for 2h. The iso-electric points of TiO2 and Mica were pH 3.9 and pH 3.25 respectively which were measured by the Z-potential analysis in water base. The maximum Z-potential difference between two powders was observed in the range of pH 3.6~3.7 TiO2 powder was adsorbed on the surface of mica by heterocoagulation method in pH 3.6~3,7 The properties of prepared TiO2 powder was haracterized by TG-DTA, XRD and SEM The morphology and thermal properties of TiO2-adsorbed mica were examined.