• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.38-49
• /
• 2021

Objectives: This study was conducted to analyze the impact of safety/health managers' experience of trauma case on their post traumatic stress disorder and the mediation effects of job stress and the moderated mediation effects of social support. Method: Using a structured questionnaire, data were collected from 241 workplace safety/health managers with experience in trauma case. The collected data were analyzed using SPSS(IBM. Ver.26.0) and verified through SPSS PROCESS Macro (Ver. 3.4). Results: The trauma case experience and the job stress, which is a mediation variable, had a statistically significant positive effect on post-traumatic stress disorder, and the job stress had a positive mediation effect in the relationship between the trauma case experience and post-traumatic stress disorder. Social support had a statistically significant negative moderation effect in the relationship between the trauma case experience and job stress; social support had a moderated mediation effect on the indirect effect of a job stress on the post-traumatic effect through a trauma case experience. Conclusion: The above findings suggest that work-related job stress management is important in order to reduce safety/health managers' post-traumatic stress disorder caused by the experience of trauma case, and that social support is essential to reduce the job stress, which can later be used as a basis for further studies.

• 한국대기환경학회지
• /
• 제29권5호
• /
• pp.656-667
• /
• 2013

The non-exhaust coarse, fine, and ultrafine particles were characterized by on-road driving measurements using a mobile sampling system. The on-road driving measurements under constant speed driving revealed that mass concentrations of roadway particles (RWPs) were distributed mainly in a size range of 2~3 ${\mu}m$ and slightly increased with increasing vehicle speed. Under braking conditions, the mode diameters of the particles were generally similar with those obtained under constant speed conditions. However, the PM concentrations emitted during braking condition were significantly higher than those produced under normal driving conditions. Higher number concentrations of ultrafine particles smaller than 70 nm were observed during braking conditions, and the number concentration of particles sampled 90 mm above the pavement was 6 times higher than that obtained 40 mm above the pavement. Under cornering conditions, the number concentrations of RWPs sampled 40 mm above the pavement surface were higher than those sampled 90 mm above the pavement. This might be explained that a nucleation burst of a lot of vapor evaporated from the interaction between the tire and the road pavement under braking conditions continuously occurred by cooling during the transport to the sampling height 90 mm, while, for the case of cornering situations, the ultrafine particle formation was completed before the transport to the sampling height of 40 mm.

• Elastomers and Composites
• /
• 제34권3호
• /
• pp.253-261
• /
• 1999

조성이 다른 접착제를 포함한 고무혼합물의 가교특성은 접착제 조성에서 탄닌이 많이 포함될수록 스코치 시간은 증가하였으며 경화속도는 다소 감소하는 것으로 보아 탄닌 분자의 크기와 형태 때문에 초기 가교반응을 지연시킴과 동시에 경화속도 역시 다소 지연됨을 알 수 있었다. 이들 고무혼합물의 인장물성 역시 탄닌이 많이 함유된 접착제를 고무에 혼합할수록 고무혼합물의 인장강도는 다소 감소하였다. 이는 탄닌이 많이 함유될수록 가교반응을 지연시켜 전체 고무혼합물의 가교도가 감소하기 때문일 것으로 사료되었다. 또한 접착제의 조성이 고무-섬유 접착에 미치는 영향을 보강코드로서 나일론 610 모노필라멘트를 사용하여 TCAT(Tire Cord Adhesion Test) 방법으로 조사하였다. 레소시놀-탄닌-포름알데히드-라텍스(RTFL) 접착제 조성에서 레소시놀 1 mole당 포름알데히드의 mole 비가 증가할수록 접착력은 증가하였고 대략 포름알데히드 5mole 이상에서 최적의 접착력을 나타냈다. 보강코드상의 접착제 수확량(DPU) 역시 최종 접착력에 영향을 미치지만, 나일론 610 모노필라멘트의 경우는 접착제 조성에 따른 DPU가 거의 일정하여 접착력의 차이는 접착제의 조성 중 탄닌의 거동 때문으로 해석될 수 있었다.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.125-140
• /
• 2005

본 연구에서는 콘크리트 포장에서 발생하는 소음을 저감시키기 위한 최적의 임의간격 횡방향 타이닝 설계 간격을 제안하였다. 기존 문헌조사를 바탕으로 소음 발생에 대한 원인을 규명하였고, LCG(linear congruential generators) 알고리즘 이론을 이용하여 특정 주파수에 집중되는 에너지를 효과적으로 분산시킬 수 있는 타이닝의 간격을 설계하였다. 실내 시뮬레이션 결과를 대구-포항 고속국도 현장에 적용하였고 기존 국내외에 적용된 임의간격 횡방향 타이닝 시공도 병행하여 실내 외 소음 및 교통소음을 비교하였다. 실내 외 소음 측정 결과, 피치 소음으로 인한 소음을 감소시킴으로써 임의간격 횡방향 타이닝 구간이 일반구간 보다 낮은 소음도를 보였으나, 그 효과가 크지 않았다. 교통 소음 측정에서도 전체적으로 일반 타이닝 구간에 비해 임의 간격 횡방향 타이닝 구간에서 더 큰 소음저감 효과를 확인할 수 있었으나, pass-by 소음 측정과는 다소 차이를 보였다.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.25-34
• /
• 2010

Fretting damage reduces fatigue life of the material due to low amplitude cyclic sliding and changes in the contact surfaces of strongly connected machine and structures such as bolt, key, fixed rivet and connected shaft, which have relative slip of repeatedly very low frequency amplitude. In this study, the fretting fatigue behavior of 7050-T7451 aluminum alloys used mainly in aircraft and automobile industry were evaluated. The plain fatigue test and fretting fatigue test under cyclic bending load carried out commercial bending fatigue tester and specially devised equipments to cause fretting damage. From these experimental work, the following results obtained: (1) The plain fatigue limit for stress ratio R=-l was about 151MPa. (2) In case of fretting fatigue, fatigue limit for stress ratio R=-l about 72MPa, the fatigue limit for R=0 about 81MPa, and the fatigue limit for R=0.3 about 93MPa. (3) The fatigue limit reduction rates by the fretting damage were about 52%(R=-1), 46%(R=0) and 38%(R=0.3) respectively. (4) The fatigue limit reduction rate decreased with stress ratio increase. In fretting bending test, as stress ratio increased, occurrence of initial oblique crack by fretting decreased or phased out, so that fracture surfaces were formed by plain fatigue crack occurrence, and such tendency was notable as stress amplitude increased. (5) Tire tracks and rubbed scars were observed in the fracture surface and contacted surface.

• 디지털융복합연구
• /
• 제17권12호
• /
• pp.203-210
• /
• 2019

오늘날 대부분의 자동차는 전자제어를 통하여 엔진의 상태를 제어하여 최적의 성능을 얻을 수 있도록 하고 있다. 본 연구는 캔통신을 이용하여 자동차의 엔진의 정보를 운전자에게 실시간으로 화면에 표시하여 고장진단과 최적의 자동차 상태를 유지하는 장치를 개발하였다. 이 시스템은 엔진에서 발생되는 정보를 OBD2 소켓을 통하여 엔진의 흡배기온도, 현재 배터리 전압, 타이어 공기압, RPM, DPF 포집량, 토크, 마력 등의 정보를 실시간으로 운전자에게 표시하여 운전자가 차량의 상태를 즉시 확인이 가능하다. 타이어의 공기압을 측정하여 화면에 표시하여 안전운행에 도움을 줄 수 있으며, 자신의 취향에 맞도록 변속타이밍을 설정할 수 있는 모드를 제공한다. 특히 디젤엔진 자동차의 경우 매연으로 인한 문제는 자동차 성능과 환경오염에 악영향을 미칠 수 있으므로 시스템 화면에 DPF 포집량을 표시하여 환경오염 방지와 효율적인 자동차 관리를 할 수 있도록 시스템을 개발하였다.

• 자원리싸이클링
• /
• 제9권1호
• /
• pp.27-35
• /
• 2000

본 연구에서는 150kg/batch(승용차용 타이어 기준) 규모의 건류가스화 장치를 이용하여 페타이어와 7종류의 폐합성수지에 대한 건류가스화 실험을 폐기물 종류별 건류가스화 특성을 파악하고, 건류시간 및 1차 공기량에 따른 건류가스의 발생량과 성분 조성 등의 변화 경향등을 분석하였다. 페타이어의 경우 반응기 내부에서 연소영역과 가스화 영역의 뚜렷한 구별이 확인되었고, 건류용 1차 공기량에 대해 1.05~1.35 배의 비율로 발생되는 생성가스는 비가연성성분 이외에 CO, $H_2$, $C_1$~$C_7$ 범위의 탄화수소로 구성되었으며, 정상상태에서는 1.500~300 kcal/N$\textrm{m}^3$. 종말처리 단계에서는 250~500kcal/N$\textrm{m}^3$의 발영량을 각각 나타냈다. 페합성 수지류는 생성가스의 온도변화가 심하고, $N_2$, $CO_2$, $O_2$의 구성비율이 85%이상인 건류생성가스는 원료폐기물이 가진 열량의 10~35%에 해당하는 300~2,900kcal/N$\textrm{m}^3$ kcal/Nm의 발열량을 보유하였다.

• Journal of Chest Surgery
• /
• 제27권4호
• /
• pp.331-334
• /
• 1994

Pneumatic rupture is a rare cause of esophageal injury, as evidenced by only 19 cases reported in the literature. We experienced one case of esophageal rupture due to bursting of a truck inner tube. The patient, who was a 45-year old male, had severe chest pain, respiratory distress, flushing in the face and neck, and subcutaneous emphysema after tire explosion. Three days after the incident, a diagnosis of rupture of the thoracic esophagus was established by esophagogram using water soluble contrast media, and then emergency operation was done. The operation involved mediastinal and thoracic drainage and resection of the esophagus combined with cervical esophagostomy and feeding gastrostomy. On the 105th day after the operation, cervical esophagogastrostomy via substernal route was performed. The patient was successfully treated with the staged operations. As in the other reported cases, the injury was located in the lower one third of the esophagus. Four main characteristics of the clinical signs of pneumatic rupture are 1] wounds or burns to the face or mouth, 2] chest pain or epigastric pain, 3] subcutaneous emphysema, and 4] respiratory distress. We emphasize that the high index of suspicion of esophageal rupture is very important in diagnosis and that diagnosis should be based on the same findings common to other forms of esophageal injury.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.13-16
• /
• 2005

The mechanical properties of composite materials may degrade severely in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause sever damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PYDF(polyvinylidene fluoride) film sensors and strain gages were used for monitoring impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research demonstrate how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-199
• /
• 2003

The traction drive system for the urban transit Rubber-tire system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the Proposed traction drive system is verified by the MATLAB simulation results.