• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.60-64
• /
• 2001

The variability of a ventilated filter cigarette depends on the details of its construction and one properties of its components and the variations in filter ventilation is effected by many factors such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. In this study, the effects of combination of tipping paper and plug wrap on filter ventilation of cigarettes were studied for the target ventilation level under the specific tobacco column and filter tip in order to reduce the variation of filter ventilation. When Nicolas Baskevitch\`s equation on filter ventilation was used to try out Monte Carlo Simulation, at the combination where tipping paper permeability is high and plug wrap permeability is low, even the small change in tipping paper and plug wrap permeability showed high variation of target ventilation level. Also, according to the analysis data of filter ventilation in cigarettes designed at the level of 45% filter ventilation by the combinations with tipping paper and plug wrap, the variation in cigarette filter ventilation was increased as increasing tipping paper permeability and decreasing plug wrap permeability. As the results of this study, the variation of filter ventilation can be reduced by increasing plug wrap permeability/tipping paper permeability ratio in the cigarette design, considering 2-3% of tipping paper permeability variation(%CV) and about 10% of plugwrap permeability variation.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.60-66
• /
• 2002

The ventilation rate of a ventilated filter cigarette depends on the details of its construction and on the properties of its components such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. Also, It was affected by the condition of adhesion of glue between tipping paper and plug wrap. This study was carried out to find the effect of surface properties of tipping paper and plug wrap, and a characteristics of glue on the ventilation rate of cigarettes. Our results indicated that the surface properties of tipping paper and plug wrap affected on the ventilation rate of cigarette. Also, the variation of ventilation rate was affected by the surface properties of tipping paper and the size of glue particles. We also found that the surface properties of tipping paper and plug wrap, and the emersion size of glue were the major factors to concern in the design for materials of cigarettes.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.209-214
• /
• 2004

This paper deals with tipping over of hydraulic excavator's crane work. If excavator lift too heavy weight, excavator tipped up. This is 38% of whole excavator accidents. In this paper, tipping over load which is maximum load of excavator can lift with displacement of excavator links, real load and tipping over rate are calculated with Zero Moment Point. We designed the tipping-over stability criterion algorithm considering the dynamic characteristics to which ZMP theory is applied and discussed the usefulness of the proposed algorithm compared with the moment equilibrium equation through the simulation and the actual test.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.1
• /
• pp.40-49
• /
• 2002

Floating fixed scroll adopted for tip sealing enhancement in a scroll compressor is always under the influence of tipping moment produced by internal gas forces. Unless the tipping moment is property compensated by some restoring moment, the fired scroll would suffer tipping movement, degrading the compressor performance. The condition on which the tipping movement of the fixed scroll can be suppressed has been investigated analytically. For no tipping movement, the floating fixed scroll should be suspended on the main frame at proper level. The upper limit of the stable suspension is the axial location of the o-rings adopted for a back pressure chamber sealing on the rear side of the fixed scroll, and the lower limit is the mid-height of the scroll wrap.

• Journal of Korean Society for Quality Management
• /
• v.42 no.1
• /
• pp.15-32
• /
• 2014

This study examines the relationship between tip amount and its possible antecedents: bill size, the Big Five personality types, meal type, food quality, atmosphere, service quality, consumer gender, server gender, customer hospitality experience, race, and alcohol consumption. A survey of southeastern undergraduate students was conducted to collect information about the customer, server and customer tipping habits. While the analysis suggests that service is an important factor, it shows that other factors affect tip amount. Furthermore, these factors affect tip amounts in many different ways. Some examples of these factors include bill size, alcohol consumption, gender dynamics, meal type, food quality, and personality type. The conclusion suggests the intuition behind these factors by providing a dissection of their meaning and their importance to servers, customers, and managers alike. Purpose: This study tests restaurant customer tipping habits and some personality traits that have received limited previous attention as predictors of tipping. Methods: This study is that the tip amount was self-reported, business students at a university in a large southeastern city of USA were asked to complete a tipping journal. Results: This study was able to replicate the service-tipping relationship. Moreover, this study reiterated that server friendliness is a very powerful tool to increasing tips. Conclusion: This study strongly indicate that service has a positive relationship with tip amount, and also produce a positive relationship with emotional stability and a negative relationship to conscientiousness.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.42-52
• /
• 2022

Objective: This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement: tipping and translation. Methods: Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results: There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions: An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.286-290
• /
• 2004

This paper deals with tipping over of hydraulic excavator's crane work. If the excavator lifts too heavy weight, the excavator will be tipped up. This is account for 38% of whole excavator accidents. In this paper, tipping-over load which is maximum load of excavator can lift with displacement of excavator links, real load and tipping-over rate are computed with Zero Moment Point theory. ZMP is verified with simulation and experiment.

• 연구논문집
• /
• s.32
• /
• pp.5-13
• /
• 2002

This paper deals with the result of an analysis on the effect of the power generation by municipal solid waste(MSW)-refuse derived fuel(RDF) and the introduction of tipping fee sharing between RDF manufacturing and power generation project. As a model case for the MSW generated at small and medium cities in our country, an analysis of the RDF power generation and Tipping fee sharing shows that 1) MSW amount of 7,800* $10^3 $t/y could produce 1,950*$10^3$t/y of RDF 2) Electric power generated by MSW-RDF could supply 290,000 households/year and 98,548 C-t/y of $CO_2$ could be reduced. 3) Tipping Fee should be shared by the considering of the contents of project of both side between RDF Production and power generation.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.79-82
• /
• 1984

This study was carried out to investigate the effect of porous plug wrapping and perforated tipping paper on tip ventilation rate of cigarettes. The wider perforated width of tipping paper was and the more rows Perforation were given, the more increased the effort on the tip ventilation rate, and the high porous plug wrap also had a influence on the tip ventilation rate. Tip ventilation rate purposed would be obtained by adjusting the permeability of tipping papers with high porous plug wrap. To keep the cigarette quality uniform, the high porous plug wrapping paper and the tipping paper of small pore and many rows of perforation must be combined.

• Korean Journal of Veterinary Research
• /
• v.42 no.2
• /
• pp.277-282
• /
• 2002

This study was conducted to investigate the influences of the rope and the tipping chute restraints on body temperature (BT) and heart rate (HR) as acute response for stress caused by restraining for diagnasis and treatment in cattle. Both parameters were recorded by active biotelemetry. In addition cortisol concentration in blood was analyzed as a indicator for stress response. Twelve cattle were divided into two groups based on hydraulic power, the rope restraint group and the tipping chute restraint group. BT and HR were measured at -30 (base), 0, 10, 20, 30, 40, 50, 60, 90, 120, and 180 minutes, including restraint period from 0 to 30 minutes during the experiment. The results obtained in this study was summarized as follows: 1. BT of the rope restraint group was increased ($39.8{\pm}0.3^{\circ}C$) until 20 min after restraint stress for 30 min, and then maintained with high values to the end of experiment. In the tipping chute restraint group, the BT was increased ($39.6{\pm}0.3^{\circ}C$) until the end of the restraint period, but then showed decrese until the end of experiment. 2. HR of both groups was maximized at the beginning of the restraint stress (P<0.05), and then it was decreased gradually but in the tipping chute restraint group showed increase again at the end of the reatraint stress (P<0.05). 3. The cortisol level of the rope restraint group was increased significantly ($9.72{\pm}5.09{\mu}g/d{\ell}$) until 30 min after the end of the restraint stress (P<0.05) and then decreased, but in the tipping chute restraint group showed great increase ($4.68{\pm}1.56{\mu}g/d{\ell}$) at the end of the restraint stress (P<0.05) and then decreased while the tipping chute restraint group was significantly lower than the rope restraint group 30 min after the restraint stress (P<0.05). In conclusion, this study suggests that the tipping chute restraint produces less response to physical stress than the rope restraint but the time for diagnasis and treatment should be shortened when using the tipping chute restraint.