• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.273-288
• /
• 2011

Chon-Ashuu copper mining claim area is located, in terms of the geotectonic setting, in the northern part of the suture line which is bounded with the marginal part of Issik-kul micro-continent on the southern part of North Tien-Shan terrane. The geological blocks of Chon-Ashuu districts belong to the southern tip of Kazakhstan orocline. The rock formation of this area are composed of the continental crust or/and arc collage and the paleo-continental fragments-accretionary wedge complex of pre-Altaid orogenic materials. ASI(Alumina Saturation Index) of Paleozoic plutonic rocks in Chon-Ashuu area belong to the peraluminous and metaluminous rocks which were generated from fractional crystallization of Island and volcanic arc crusts in syn-post collisional plate. The geology of the ChonAshuu area consists of upper Proterozoic and Paleozoic rock formations. According to Harker variation diagrams for Chon-Ashuu arenaceous sedimentary rocks, the silty sandstone of Chon-Ashuu area showing the mineralogical immaturity were derived from Island arc or the marginal environments of active continent in Cambro-Carboniferous period. Numerous intrusive rocks of Chon-Ashuu area are distributed along north east trending tectonic structures and are bounded on four sides by the conjugate pattern. The most common type of the plutonic rocks are granodiorite and monzodiorite. According to the molecular normative An-Ab-Or composition (Barker, 1979), the plutonic rocks in Chon-Ashuu area are classified into tonalite - trondhjemite - granodiorite (TTG) series which are an aggregation of rocks which is the country rock of copper mineralization, that are formed by melting of hydrous mafic crust at high pressure.

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.141-148
• /
• 2008

Nitric oxide (NO) is an important regulator of renal blood flow, glomerular hemodynamics, and tubule transport processes in the kidney. There is also evidence that NO is involved in cell cycle regulation and mitotic division. During development the nNOS expression pattern differs from that observed in adult animals. However, little is known about temporal and spatial patterns of nNOS expression in the developing kidney. The purpose of this study was to establish the time of expression and the distribution of nNOS in the developing rat kidney. Kidneys from 14-, 16-, 17-, 18-, and 20-day-old fetuses, 1-, 4-, 7-, 14-, and 21-day-old pups, and adult animals were preserved and processed for immunohistochemistry. In the adult kidney, nNOS was detected in the parietal epithelium of Bowman s capsule, macula densa, descending thin limb and inner medullary collecting duct. nNOS immunoreactivity appeared first in the distal tubule anlage at 15 days of gestation, and in all epithelial cells of developing thick ascending limbs (TAL) as well as macula densa of 17- and 18-day-old fetuses. From 20 days of gestation to 14 days after birth, nNOS was expressed in the newly formed cortical TAL, which are located in the medullary ray, whereas in mature TAL of juxtamedullary nephrons, nNOS immunolabeling gradually decreased in intensity and became restricted to the macula densa. In inner medullary collecting ducts, nNOS immunoreactivity appeared first at 7 days after birth in the papillary tip and gradually ascended to the border between outer and inner medulla. In the descending thin limb and parietal epithelium of Bowman's capsule, weak nNOS immunoreactivity was observed at 14 days after birth and labeling gradually increased to adult levels at 21 days after birth. These results suggest that differential expression of nNOS in the developing kidney is an important physiological regulator of renal function during kidney maturation.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.121-130
• /
• 2017

This study was carried out to investigate a method for producing cultured virus - free ovules for breeding high - quality Citrus cultivars. Ovules from the immature fruits of three citrus cultivars native to Jeju (Dongjeongkyool, Cheongkyool, and Jikak) and two cultivars of Citrus unshiu Marc. (Miyagawa wase and Haryejosaeng) that were thought to be infected with Citrus tristeza virus (CTV) were cultured on MS2 medium (Murashige - Skoog [MS] basal medium containing $500mg{\cdot}L^{-1}$ malt extract, $50g{\cdot}L^{-1}$ sucrose, $1.0 mg{\cdot}L^{-1}$ kinetin, and $8g{\cdot}L^{-1}$ agar). After four weeks of culture, 10, 21, 13, 5, and 7 somatic embryos and 2, 4, 2, 4, and 5 white callus cells (surrounding green somatic embryos) were obtained from Dongjeongkyool, Cheongkyool, Jikak, Miyagawa wase, and Haryejosaeng, respectively. After six weeks of culture, somatic embryos were obtained from cultured cells grown on MT basal medium supplemented with malt extract ($500mg{\cdot}L^{-1}$), lactose ($70g{\cdot}L^{-1}$), and agar ($16g{\cdot}L^{-1}$). Over 60% of the somatic embryos from citrus cultivars native to Jeju developed into normal plants on MS basal medium supplemented with malt extract ($500mg{\cdot}L^{-1}$), sucrose ($50g{\cdot}L^{-1}$), and agar ($8g{\cdot}L^{-1}$) after 10 weeks of culture. Normal plants were regenerated from two Citrus unshiu Marc. cultivars on MT basal medium supplemented with sorbitol (1.0 M), galactose (1.0 M), $GA_3$ ($1.0mg{\cdot}L^{-1}$), and Gelrite ($3g{\cdot}L^{-1}$). The absence of virus in plants generated from cultured ovules was confirmed by RT - PCR and antigen - antibody reactions. Therefore, virus - free Citrus cells can be obtained for breeding high - quality citrus cultivars using the biotechnological technique evaluated in this study.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.834-838
• /
• 2000

As an endeavor to establish a micropropagation system for Epimedium koreanum Nakai., this study was carried out to define methods to disinfect its explants and media for callus induction, proliferation and plant regeneration. The lowest infection rates by fungi or bacteria on apical and axillary bud explants of rhizome were observed when they were immerged in 0.3% NaOCl solution for 20 min after soaked in 0.1% $AgNO_3$ solution for 30 min, but leaf explants were seldom infected with fungi or bacteria by this disinfectant method. The highest rate of plantlet formation was obtained from the explants disinfected in 0.3% NaOCl solution for 20 min after soaked in 0.1% $AgNO_3$ solution for 60 min for tip buds and in 0.1 % $AgNO_3$ solution for 30 min for axillary buds of rhizome. Induction rate of callus was the highest from the explants disinfectd in 0.3% NaOCl solution for 20 min after soaked in 0.2% $AgNO_3$ solution for 15 min. Callus growth was proper in a modified 1/2 MS medium including half strength of $NH_4NO_3$ with $0.02-0.2mg{\cdot}L^{-1}$ BA and $2.0mg{\cdot}L^{-1}$ NAA. Low rate of plantlet regeneration was obtained in 1/2 UM or 1/2 White medium with $2.0mg{\cdot}L^{-1}$ BA and $0.2mg{\cdot}L^{-1}$ AA.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.337-347
• /
• 2011

The basic structure of the primary crowns usually resemble their succeeding permanent teeth. However, maxillary second primary molars resemble ipsilateral first permanent molars. Accordingly in this study, odontometric data of the two teeth was obtained, then analyzed to verify the morphological relationship and sex difference between the two teeth. Dental study casts were examined for their mesiodistal and buccolingual width of the crowns, diameter of each cusps, and intercuspal distances. Photographs of the crowns were taken to measure the angles between each cusp tip. The results are as follows : 1. In boys, PrI, PaI, DBC angle, and MBC angle did not show any statistically significant difference between the two teeth(p>0.05), and moderate level of correlations were observed. 2. In girls, crown index, DBC angle, and MBC angle of the two teeth did not show any statistically significant difference(p>0.05), and moderate level of correlations were recognized. 3. Measurements that did not show statistically significant difference between the two teeth in both boys and girls were DBC angle and MBC angle(p>0.05). In DLC angle, however, statistically significant difference was observed(p<0.01). 4. Most of the measurements showed sex differences, except DBC angle, which did not show any sex difference in both teeth(p>0.05).

• Survey Research
• /
• v.6 no.1
• /
• pp.1-38
• /
• 2005

Considering the importance of corruption index measurement model and the diffusion of popular awareness about the importance of anti-corruption, this research compared and analyzed existing corruption index measurement models. This paper has selected "Anti-Corruption Index model(ACI model)" that was developed by Seoul Development Institute and "CCEJ's Corruption Index model" which is under use by the Citizens' Coaltion for Economic Justice. These two models were analyzed in terms of appropriateness of 'the indicator and index choice method', 'the research design' and 'the use of statistical data'. This analysis shows that two models have some problems. First, at the level of indicator and index choice method, the indicators of CCEJ's corruption index model is too atomized and redundant. As not putting weight of indicator, it did not consider importance of each indicator. Citizens who evaluated the level of corruption didn't participate in the weight evaluation team, which results in failure of the model to reflect the citizens' opinion. Also, because the question about Seoul Metropolis' corruption level is not included, it is not detected difference between real corruption level and perceptive corruption level. Second, in terms of appropriateness of research design, the sample of the CCEJ' corruption index model is too small to get credibility. The objectivity of research method seems to be low because survey was performed by exit interview. In addition, 38 items are overfull in the questionnire of CCEJ's corruption index model compare to 13 items in ACI model. Also, in making up questions, the terms are redundant and unobvious. Third, in regarding with feasibility of the statistical data, the CCEJ's corruption index model uses regulation data for disciplinary punishment of 25 local governments in Seoul from 1995 to 1999. But, it is common ideas of scholars that statistical data indicates the tip of an iceberg in corruption. So for using a statistical data, it needs a data of enough quantity and has a high level credibility. In addition, objective method of giving weight is not developed. In this point of view, the use of statistical data has some limits. To solve this problem, ① objective data should be included in the indicators, ② various indicators should be developed and ③ a method of giving weight should be improved.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.59-64
• /
• 1980

These experiments were carried out to define the effects of 2.4-D, NAA and Benzyladenine on the differentiation and growth of the organs and the induction of callus from the potato meristem. The results were summarized as follows ; 1. The differentiation and growth of the shoots from the potato meristem was promoted in increased concentration of Benzyladenine but the callus was not induced on the M.S. medium containing Benzyladenine. 2. On the M.S. medium containing NAA 0.5 mg/l or higher concentration of NAA, the shoots were not initiated but the callus were induced from potato meristem. The growth of callus was promoted in increased concentration of NAA. 3. The roots were initiated from 50% of potato meristems planted on the M.S. medium containing more than 0.1 mg/l of NAA but the roots were pot initiated on the medium containing 2.4-D. 4. The shoot growth was significantly increased by increasing of 2.4-D concentration up to 0.1 mg/l, but the shoots were not initiated on the medium containing 2.4-D more than 1.0 mg/l. 5. For the induction and growth of the callus from potato meristem, NAA was more effective than 2.4-D and the most effective medium was M.S. medium supplemented with 2.0 mg/l of NAA. 6. The M.S. mediums supplemented with BA 2.0 mg/l and NAA 0.1 mg/l or BA 1.0 mg/l and 2.4-D 0.1 mg/l showed good results for entire plant regeneration from potato meristem.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.344-351
• /
• 2006

The purpose of this study was to evaluate the thermal expansion characteristics of injectable ther-moplasticized gutta-perchas and a Resilon. The materials investigated are Obtura gutta-percha, Diadent gutta-percha, E&Q Gutta-percha Bar and Epiphany (Resilon). The temperature at the heating chamber orifice of an Obtura II syringe and the extruded gutta-percha from the tip of both 23- and 20-gauge needle was determined using a Digital thermometer. A cylindrical ceramic mold was fabricated for thermal expansion test, which was 27 mm long, with an internal bore diameter of 3 mm and an outer diameter of 10 mm. The mold was filled with each experimental material and barrel ends were closed with two ceramic plunger. The samples in ceramic molds were heated in a dilatometer over the temperature range from $25^{\circ}C$ to $75^{\circ}C$. From the change of specimen length as a function of temperature, the coefficients of thermal expansion were deter-mined. There was no statistical difference between four materials in the thermal expansion in the range from $35^{\circ}C$ to $55^{\circ}C$ (p > 0.05). However, Obtura Gutta-percha showed smaller thermal expansion than Diadent and Metadent ones from $35^{\circ}C$ to $75^{\circ}C$ (p < 0.05). The thermal expansion of Epiphany was similar to those of the other gutta-percha groups.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.550-558
• /
• 2007

The purpose of this study was to evaluate the insertion depth of several brands of master gutta percha cones after shaping by various Ni-Ti rotary files in simulated canals. Fifty resin simulated J-shape canals were instrumented with ProFile, ProTaper and HEROShaper. Simulated canals were prepared with ProFile .04 taper #25(n=10), .06 taper #25(n=10), ProTaper F2(n=10), HEROShaper .04 taper #25(n=10) and .06 taper #25(n=10). Size #25 gutta percha cones with a .04 & .06 taper from three different brands were used: DiaDent; META; Sure-endo. The gutta percha cones were selected and inserted into the prepared simulated canals. The distance from the apex of the prepared canal to the gutta percha cone tip was measured by image analysis program. Within limited data of this study, the results were as follows 1. When the simulated root canals were prepared with HEROShaper, gutta-percha cones were closely adapted to the root canal. 2. All brands of gutta percha cones fail to go to the prepared length in canal which was instrumented with ProFile, the cones extend beyond the prepared length in canal which was prepared with ProTaper. 3. In canal which was instrumented with HEROShaper .04 taper #25, Sure-endo .04 taper master gutta percha cone was well fitted(p < 0.05). 4. In canal which was instrumented with HEROShaper .06 taper #25, META .06 taper master gutta percha cone was well fitted(p < 0.05). As a result, we concluded that the insertion depth of all brands of master gutta percha cone do not match the rotary instrument, even though it was prepared by crown-down technique, as recommended by the manufacturer. Therefore, the master cone should be carefully selected to match the depth of the prepared canal for adequate obturation.