• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.612-621
• /
• 2018

본 연구에서는 전기분해 방법을 이용한 질산성질소($NO_3{^-}-N$) 분해가 $TiO_2$ nanotube plate 및 구리, 니켈, 스테인리스 스틸, 알루미늄, 주석, 티타늄을 환원전극으로 사용하였을 때 가능한지를 평가하였다. 전극의 전기화학적 특성 평가는 임피던스 측정을 하여 비교하였고, $TiO_2$ nanotube plate의 표면 분석은 주사전자현미경을 통해 SEM 및 BET 분석법을 이용한 비표면적 분석을 통해 비교하였다. 질산성질소 전해실험의 경우 90분의 실험을 진행하였으며, 실험 결과 전극 표면의 부식이 수반되지 않은 $TiO_2$ nanotube plate가 기타 금속 전극에 비해 질산성질소 환원 반응속도가 가장 뛰어난 것으로 확인되었다.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.40-44
• /
• 2017

The effect of weak dielectric silicone dioxide($SiO_2$) embedded in polyfluorene(PFO) emitting layer of polymer-based multi structure OLED was investigated. Indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)/poly(9,9-di-n-octylfluorenyl-2,7-diyl)(PFO)/2,2,2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi)/aluminum(Al) structure OLED was fabricated by spin-coating method. Applied electric field causes some effect on $SiO_2$ in PFO layer. Thus, interaction between polymers and affected $SiO_2$ might generate electrical and luminance properties change. Experimental results, show the reduced threshold voltage of 6 V(from 23 V to 17 V). The maximum current density was rather increased from $71A/m^2$ to $610A/m^2$ and maximum brightness was also increased from $7.19cd/m^2$ to $41.03cd/m^2$, 9 and 6 times each. Additionally we obtained colour broadening result due to the increasing of blue-green band emission. Consequently we observed that electrical and luminance properties are enhanced by adding $SiO_2$ and identified the possibility of controlling the emission colour of OLED device according to colour broadening.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.319-325
• /
• 1999

Direct current(d.c.)leakage current voltage characteristics of radio-frequencymagnetron sputtered BaTa\sub 2\O\sub 6\ film capacitors with aluminum(A1) top and indium tin oxide (ITO) bottom electrodes have been investigatedas a function of applied field and temperature. In order to study surfacetreatment effect on the electrical characteristics of as-deposited film weperformed exposure of oxygen plasma on $BaTa_2O_6$ surface. d. c.current-voltage (I-V), bipolar pulse charge-voltage (Q-V), d. c. current-time (I-t) andcapacitance-frequency (C-f) analysis were performed on films. All ofthe films exhibita low leakage current, a high breakdown field strength (3MV/cm-4.5MV/cm), and high dielectric constant (20-30). From the temperature dependence of leakage current,we can conclude that the dominant conduction mechanism is ascribed toSchottky emission at high electric field (>1MV/cm) and hopping conduction at lowelectric field (<1MV/cm). According to our results, the oxide plasma surfacetreatmenton as-deposited $BaTa_2O_6$ resulted in lowering interfacebarrier height and thus, leakage current when a negative voltage applied to the A1 electrode. This can be explained by reduction of surface contamination via etching surface and filling defects such as oxygen vacancies.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.23-27
• /
• 2005

본 연구에서는 유가금속 성분이 약 45%인 폐인쇄회로기판을 사용하여 염산 용액에서 전해생성된 염소에 의한 침출 거동을 조사하였다. 폐인쇄회로기판내 유가금속 중 구리는 약 84%에 해당하였다. 전해생성된 염소에 의한 침출거동에 미치는 변수들의 영향을 조사한 결과 염소의 전핸생성 및 교반에 의한 용액으로의 용해 및 혼입 단계가 침출율에 가장 큰 영향을 주었다. 염산농도 1M, 전류밀도 $20\;mA/cm^2$, 교반속도 600 rpm, 용액온도 $50^{\circ}C$의 조건에서 99%의 침출율을 얻었다. 전해생성된 염소의 침출반응 이용율은 교반속도가 높고 전류밀도가 낮을수록 높아졌다. 반응 초기에는 알루미늄, 납, 주석 등 시료내 기타 금속성분들의 침출이 주로 일어났으며, 이러한 반응이 둔화됨에 따라 구리의 침출이 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.158-161
• /
• 2004

We have studied a lifetime in organic light-emitting diodes depending on buffer layer. A transparent electrode of indium-tin-oxide(ITO) was used as an anode. And the cathode for electron injection was LiAl. Phthalocyanine Copper(CuPc), Poly(3,4-ethylenedioxythiophene):poly (PEDOT:PSS), or poly (9-vinylcarbazole)(PVK) material was used as a buffer layer. A thermal evaporation was performed to make a thickness of 40nm of TPD layer at a rate of $0.5{\sim}1\;{\AA}/s$ at a base pressure of $5{\times}10^{-6}\;torr$. A material of tris(8-hydroxyquinolinate) Aluminum($Alq_3$) was used as an electron transport and emissive layer. A thermal evaporation of $Alq_3$ was done at a deposition rate of $0.7{\sim}0.8[{\AA}/s]$ at a base pressure of $5{\times}10^{-6}\;torr$. By varying the buffer material, hole injection at the interface could be controlled because of the change in work function. Devices with CuPc and PEDOT:PSS buffer layer are superior to the other PVK buffer layer.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• Journal of Oral Medicine and Pain
• /
• 제43권4호
• /
• pp.131-135
• /
• 2018

Purpose: To investigate the correlation between the amount of salivary metal ions released from fixed prostheses and the period of restoration insertion, and to evaluate the correlation between the type and amount of metal ions in saliva and oral lesions (OL). Methods: Based on the oldest prosthesis, we divided patients into two groups: more than 5 years (n=19) and less than 5 years (n=10). Patients were also divided into two groups by another criteria: the one with the presence (n=15), and the one with absence (n=14) of OL, and the amounts of metal ions were examined. Metal ions-gold (Au), copper, cobalt (Co), chromium (Cr), nickel, zinc, aluminum, palladium (Pd), tin, and platinum (Pt)-were measured using laser ablation microprobe inductively coupled plasma mass spectrometry. Results: Significantly higher quantities of Co, Pt, and Pd ions were released in patients with fixed prosthesis of more than 5 years (p<0.05). Measurement of the average amount of salivary metal ions was performed on patients with and without OL - Significantly higher amounts of Cr, Pd and Au ions were released in patients with OL (p<0.05). Conclusions: Old prostheses (${\geq}5years$) released metal ions, and among them were Co, Pt and Pd ions more than others. Patients with OL showed significantly higher levels of ion release, especially Cr, Pd and Au. There was a positive correlation between the amount of a certain kind of released metal ions, especially Pd, and the development of OL. Salivary Pd ion released from old prostheses could affect the pathogenesis of OL; therefore, long-term follow-up is important.

• 자원리싸이클링
• /
• 제28권3호
• /
• pp.68-76
• /
• 2019

비철금속의 국내 수요 공급과 스크랩들의 리싸이클링 현황을 파악하는 것은 자원재활용 관련업계와 연구자들에게 매우 필요한 일이다. 국내에서는 10여 년 전부터 한국자원리싸이클링학회지를 통하여 3~5년 주기로 주요 비철금속의 수급과 스크랩 리싸이클링 현황을 조사, 발표하고 있는데, 전체 비철금속에 대해서 조사하기에는 분량이 너무 방대하여 사용량이 많은 범용 비철금속과 그 스크랩들에 국한하여 발표하고 있다. 본 조사연구에서는 기존 조사대상인 동, 알루미늄, 아연, 연, 니켈, 마그네슘 6종에 주석을 추가하여 총 7종의 비철금속에 대하여 관세청 수출입 통계와 한국비철금속협회 자료 및 비철산업 관련 정보지들을 통해서 최근 5년 (2014 ~ 2018년) 간의 국내 수급 현황을 조사하였고 이를 토대로 그 스크랩들의 재활용율을 추정하였다.

• 건축역사연구
• /
• 제31권4호
• /
• pp.7-16
• /
• 2022

Since the beginning of the second Sino-Japanese war in 1937, the entire Korean Peninsula has entered a full-fledged wartime system. Japan enacted laws that strongly regulate the distribution of various resources for war, and the same was implemented in Joseon. In particular, as iron, copper, lead, tin, and aluminum were mobilized as raw materials for military supplies such as weapons, private distribution decreased significantly, which had a great impact on the construction industry. As the use of metal such as steel as building materials requires permission from the provincial governor, it has become difficult to supply and demand except for some military facilities. In addition, the Japanese Ministry of Commerce and Industry encouraged research and development and manufacturing to promote the so-called "substitute goods industry" to make up for the shortage of supplies. Products with improved performance through chemical treatment by injecting only a small amount of the same raw material than before or using alternative raw materials have been developed. It was intended to overcome the limitations of lack of raw materials through the chemical industry. In terms of building materials, various substitutes were produced due to the incorporation of petrochemicals and the use of synthetic resins. This trend continued even after the end of the war and served as one of the backgrounds for R&D and production of new materials without returning to the "substitute goods."