• International Journal of Automotive Technology
• /
• v.2 no.2
• /
• pp.39-45
• /
• 2001

Hydrogen is seen as one of the important energy vectors of the next century. Hydrogen as a renewable energy source, provides the potential for a sustainable development particularly in the transportation sector. Hydrogen driven vehicles reduce both local as well as global emissions. The laboratory of transporttechnology (University of Gent) converted a GM/Crusader V-8 engine for hydrogen use. Once the engine is optimised, it will be built in a low-floor midsize hydrogen city bus for public demonstration. For a complete control of the combustion process and to increase the resistance to backfire (explosion of the air-fuel mixture in the inlet manifold), a sequential timed multipoint injection of hydrogen and an electronic management system is chosen. The results as a function of the engine parameters (ignition timing. injection timing and duration, injection pressure) we given. Special focus is given to topics related to the use of hydrogen as a fuel: ignition characteristics (importance of electrode distance), quality of the lubricating oil (crankcase gases with high contents of hydrogen), oxygen sensors (very lean operating conditions), noise reduction (configuration and length of inlet pipes). The advantages and disadvantages of a power regulation only by the air to fuel ratio (as for diesel engines) against a throttle regulation (normal gasoline or gas regulation) are examined. Finally the goals of the development of the engine are reached: power output of 90 kW, torque of 300 Nm, extremely low emission levels and backfire-safe operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.473-478
• /
• 2008

WAVE is a short-to-medium range communication standard that supports both public safety and private operations in roadside-to-vehicle and vehicle-to-vehicle communication environments. The core technology of physical layer in WAVE is orthogonal frequency division multiplexing (OFDM), which is sensitive to timing synchronization error. Besides, minimizing the latency in communication link is an essential characteristic of WAVE system. In this paper, a robust, low-complexity and small-latency timing synchronization algorithm suitable for WAVE system and its efficient hardware architecture are proposed. The comparison between proposed algorithm and other algorithms in terms of computational complexity and latency has shown the advantage of the proposed algorithm. The proposed architecture does not require RAM (Random Access Memory) which can affect the pipe lining ability and high speed operation of the hardware implementation. Synchronization error rate (SER) evaluation using both Matlab and FPGA implementation shows that the proposed algorithm exhibits a good performance over the existing algorithms.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.2
• /
• pp.162-172
• /
• 2012

This paper presents a research about free piston linear engine (FPLE) fueled with hydrogen, in which, the numerical models are built to simulate the operation during the full stroke of the engine. Dynamic model, linear alternator model and thermodynamic model are used as the numerical models to predict piston velocity, in-cylinder pressure and electric power of FPLE. The spark timing and air gap length are changed to provide information for the prediction. Beside, the heat transfer problem is also investigated in the paper. The results of research are divided by two parts, including motoring mode and firing mode. The result of motoring mode showed that there is validation between simulation and experiment for volume and pressure in cylinder. For firing mode, by increasing spark timing, the velocity of piston, peak pressure and electric power also increase respectively. Beside, when increasing air gap length, the electric power increases accordingly while the motion of piston is not symmetric. The effect of heat transfer also observed clearly by reducing of the peak pressure, velocity of piston and electric power.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.30-36
• /
• 2016

The battery pack which is a main component of E-scooter needs the cooling system because it is the matter of battery safety in spite of the incresing of charge efficiency due to decress the internal resistence in the condition of high temperature. The purpose of this study is to analyse the effects of cooling methods which is the control of air's inlet and outlet operating timing. When each battery had large temperature deviation in the battery pack, the difference of battery's performance and efficiency were appeared. In this study, the cooling performance of battery pack has been improved by changing the operation timing of inlet and outlet fan, it improved the performance and efficiency of battery. The numerical analysis using a commercial code ANSYS CFX version 17.0 were used for the study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1181-1187
• /
• 2006

Stringent regulations of exhaust emission from vehicles become a major issue in automotive industries. In SI engines, it is one of the crucial factor to reduce exhaust emissions during cold start in order to meet stringent regulations such as SULEV or EURO-4, because SI engines emit a large portion of total harmful exhaust compounds when they are cold. At early stages of cold start in gasoline engines, exhaust gas temperature plays a key role to improve three way catalyst by virtue of fast warmup. Therefore, this study focused on the increase of exhaust gas temperature under controls of engine operating parameters such as spark ignition timing, valve overlap by virtue of intake VVT and catalyst heating function. Furthermore, effects on harmful emission due to these parameters are also investigated. Experiments showed that retarded spark ignition timings and increased valve overlap may be helpful to increase exhaust gas temperature. It was also found that $NO_x$ was decreased with increased valve overlap. This study also showed that sudden changes in ISA and amount of fuel due to the deactivation of catalyst heating function cause temporal increase of harmful emissions.

• Journal of ILASS-Korea
• /
• v.16 no.3
• /
• pp.126-133
• /
• 2011

In HCCI Engine, combustion is affected by change of compression speed corresponding to engine speed. The purpose of this study is to investigate the mechanism of influence of engine speed on HCCI combustion characteristics by using numerical analysis. At first, the influence of engine speed was shown. And then, in order to clarify the mechanism of influence of engine speed, results of kinetics computations were analyzed to investigate the elementary reaction path for heat release at transient temperatures by using contribution matrix. In results, as engine speed increased, in-cylinder gas temperature and pressure at ignition start increased. And ignition start timing was retarded and combustion duration was lengthened on crank angle basis. On time basis, ignition start timing was advanced and combustion duration was shortened. High engine speed showed higher robustness to change of initial temperature than low engine speed. Because of its high robustness, selecting high engine speed was efficient for keeping stable operation in real engine which include variation of initial temperature by various factors. The variation of engine speed did not change the reaction path. But, as engine speed increased, the temperature that each elementary reaction would be active became high and reaction speed quicken. Rising the in-cylinder gas temperature of combustion start was caused by these gaps of temperature.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.305-317
• /
• 2020

The navigation message is composed of the information contained in the message and the structure for transmitting this information. In order to design a navigation message, considerations in terms of message content and message structure must be elicited. For designing a Korea Positioning System (KPS) navigation message, this paper explains performance indicators in terms of message structure and message content. Most of the performance analysis of GNSS navigation messages already in operation was performed only for Time-to-first-fix-Data (TTFFD). However, in the navigation message, the message content is composed of Clock-Ephemeris Data (CED) and additional information. So, this paper proposes a new performance indicator R_(Non-CED) that can be analyzed from the viewpoint of receiving additional information along with an explanation of TTFFD focusing on the CED reception time. This paper analyze the performance in terms of message structure using these two performance indicators. The message structures used for analysis are the packetized message protocol like GPS CNAV and the packetized and fixed pattern message protocol like GPS CNAV-2. From the results, it is possible to proffer how KPS navigation messages can have better performance than GPS navigation messages. And, these two performance indicators, TTFFD and R_Non-CED, can help to design the minimum TTFF required performance of KPS navigation messages.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.177-184
• /
• 2023

In order to reserve frequency bands for stable operation of the Korean Positioning System (KPS), it must be demonstrated that the impact of interference caused by KPS on other services operating in the same bands is tolerable. The International Telecommunication Union (ITU) provides the radio regulations and a compatibility assessment methodology for the coexistence of different services in limited frequency resources. The purpose of this paper is to investigate the radio regulations regarding the compatibility issues between the KPS and other services sharing the same frequency bands. The results of the investigation show that the RNSS system can be operated in the L5-band under the condition that the Power Flux Density (PFD) and Aggregated Equivalent PFD (AEPFD) thresholds specified in the radio regulations are met. In addition, the ITU recommends that the interference-to-noise ratio (INR) protection criteria be met to prevent degradation of the performance of radar systems operating in the L2/L6-band. In the case of the S-band, coordination of allocations for RDSS space stations with respect to terrestrial services is not required if the PFD does not exceed regulated thresholds regulated by ITU.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.201-209
• /
• 2023

Time comparison techniques are required for generating and keeping Coordinated Universal Time (UTC) and to distribute standard clocks. These techniques play an important role in various fields, including science, finance, military, and communication. Among these techniques, Two-Way Satellite Time and Frequency Transfer (TWSTFT) ensures a relatively high accuracy, with a time comparison accuracy at a nanosecond level. However, TWSTFT systems have some limitations, such as the dependency on extra network links. In this paper, we propose an improved method for TWSTFT system operation and design a message structure for the suggestion. Additionally, we estimate the data rate and redundancy for the new TWSTFT signal with the designed message structure.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.67-74
• /
• 2006

Palatoplasty using Furlow's double-opposing Z-plasty has been performed from June, 1995 to September, 1999 at Seoul National University Children's Hospital. The goal of this study is to determine the optimal timing of repair and cleft severity affecting velopharyngeal function. This is the retrospective study of patients operated by the second author. The mean age of patients was 10.53 months. The patients could be divided into three groups-isolated cleft palate(n=70), unilateral cleft lip and palate(n=88), and bilateral cleft lip and palate(n=42). To evaluate the velopharyngeal function, we used two parameters, speech evaluation and cineofluorography using DSR(digital subtraction radiography). Also, to determine the relevance between cleft severity and speech development, we measured the distance between maxillary tuberosities and cleft margins. Among 200 patients, about 96% had no or minimal hypernasality and 87% had no or mild nasal emission. The cleft width and length of soft palate seemed not to be related with the speech development. Palatoplasty at the age under 12 months resulted in less 'nasal emission' and better 'articulation' of the parameters that were assessed at the age of 7 years. It can be concluded Furlow palatoplasty shows satisfactory results and also it seems that it is better to perform the operation before the age of 12 months.