• 오토저널
• /
• 제14권1호
• /
• pp.54-63
• /
• 1992

Force distribution of incomplete meshing teeth for the OHC drive timing belt system is investigated analytically. Finite difference equations of the belt tension are derived based on the force equilibrium and the deformation of the belt tooth. From the numerical results, it is found that of the force distribution prior to the boundary point shows higher values compared with those of the complete meshing state and the force distribution after the boundary point shows lower values. Also, the magnitude of the incomplete meshing region increases as the rotational speed increases and the tight side belt tension decreases.

• Journal of Korean Neurosurgical Society
• /
• 제57권4호
• /
• pp.242-249
• /
• 2015

Objective : The timing of cranioplasty and method of bone flap storage are known risk factors of non-union and resorption of bone flaps. In this animal experimental study, we evaluated the efficacy of cranioplasty using frozen autologous bone flap, and examined whether the timing of cranioplasty after craniectomy affects bone fusion and new bone formation. Methods : Total 8 rabbits (male, older than 16 weeks) were divided into two groups of early cranioplasty group (EG, 4 rabbits) and delayed cranioplasty group (DG, 4 rabbits). The rabbits of each group were performed cranioplasty via frozen autologous bone flaps 4 weeks (EG) and 8 weeks (DG) after craniectomy. In order to obtain control data, the cranioplasty immediate after craniectomy were made on the contralateral cranial bone of the rabbits (control group, CG). The bone fusion and new bone formation were evaluated by micro-CT scan and histological examination 8 weeks after cranioplasty on both groups. Results : In the micro-CT scans, the mean values of the volume and the surface of new bone were $50.13{\pm}7.18mm^3$ and $706.23{\pm}77.26mm^2$ in EG, $53.78{\pm}10.86mm^3$ and $726.60{\pm}170.99mm^2$ in DG, and $31.51{\pm}12.84mm^3$ and $436.65{\pm}132.24mm^2$ in CG. In the statistical results, significant differences were shown between EG and CG and between DG and CG (volume : p=0.028 and surface : p=0.008). The histological results confirmed new bone formation in all rabbits. Conclusion : We observed new bone formation on all the frozen autologous bone flaps that was stored within 8 weeks. The timing of cranioplasty may showed no difference of degree of new bone formation. Not only the healing period after cranioplasty but the time interval from craniectomy to cranioplasty could affect the new bone formation.

• 한국작물학회지
• /
• 제63권3호
• /
• pp.229-238
• /
• 2018

글루텐닌 조성이 빵용에 적합한 최근에 육성된 3품종(백강, 중모2008 및 새금강)에 대하여 등숙기의 추가적인 질소 시비량과 시비 시기가 단백질 함량과 반죽 특성 및 단백질 분획의 변화와 빵 부피에 미치는 영향을 평가하였다. 단백질 함량은 질소 시비량과 시비 시기에 따라 증가하였으며, 침전가는 질소 시비량 증가에 따라 증가하였지만, 추비 시기는 영향이 없었다. 반죽 특성인, 가수량, 반죽 시간과 반죽 안정도는 품종에 따라 반응이 다르게 나타났으며, SE-HPLC를 이용하여 추출성 및 비추출성 총합체와 단량체 단백질 함량은 추비 처리에 따른 단백질 함량 증가에 따라 모든 품종에서 증가하였다. 빵 부피 역시 품종에 따른 반응이 다르게 나타났는데, 새금강은 질소 시비량과 시비 시기에 상관없이 증가하였으며, 백강과 중모2008은 오히려 감소하였다. 그러나, 질소 시비에 따른 단백질 함량의 변화와 빵 부피 변화는 정의 상관을 나타내었고, 침전가 및 반죽 시간과 단백질 분획 변화는 모두 빵 부피와 정의 상관을 나타내었다. 품종 별 등숙기 시비 조건에 대한 반응이 다르게 나타났기 때문에 품종 별 맞춤 시비 체계 구축과 이상기후로 인한 등숙기 환경 변화에 따른 빵용 품종에 대한 체계적인 시비 조건 확립에 대한 지속적인 연구가 필요하다.

• KDI Journal of Economic Policy
• /
• 제28권2호
• /
• pp.51-96
• /
• 2006

재정이 경기조절 역할을 수행하기 위해서는 정책의 시점이 적절해야 하고, 정책의 효과가 유의미해야 한다. 본 연구는 재정정책기조와 경기환경의 상관관계를 고찰함으로써 위의 첫 번째 조건인 정책시점의 적절성을 평가한다. 이를 위해 본 연구는 한국은행 "조사통계월보"의 분기별 재정수지 자료와 추정된 잠재 GDP를 바탕으로 재정충격지수(Fiscal Impulse: FI)를 계산하였다. 이를 이용하여, 첫째 재정충격지수가 GDP 갭으로 대변되는 경기상황에 어떻게 대응하는지를 회귀식을 통하여 분석하고, 둘째 통계청의 경기순환주기에 따라 이 지표의 평균값을 비교하며, 셋째 각 연도의 예산제안서를 검토하여 재정당국의 경기 판단의 적절성과 정책의도의 실현을 평가하였다. 회귀분석 결과는 재정정책, 특히 지출측면이 경기 대응적(counter-cyclical)이었음을 보여주나, 경기순환주기에 따른 지표의 평균값은 경기 상승기와 하강기에 유의미한 차이를 보여주지 못하여, 전체적으로 재정정책이 경기 대응적인 모습을 보였는지에 대한 확정적인 결론을 내리기는 힘들다. 예산제안서를 검토한 결과, 재정의 경기 대응도는 정부의 경기 인식 및 정책의도와 사뭇 다르게 나타날 때도 있어 재정정책을 경기조절을 위하여 적극적으로 사용하기가 어려움을 보여준다.

• 원예과학기술지
• /
• 제33권6호
• /
• pp.845-853
• /
• 2015

The objective of this study was to predict the timing of nitrogen (N) demand through analyzing chlorophyll fluorescence (ChlF), soil-plant analysis development (SPAD), and normalized difference vegetation index (NDVI), which are positively correlated with foliar N concentration in star cluster (Pentas lanceolata). The plants were grown in potting soil under optimal conditions for 30 d, followed by weekly irrigation with five concentrations (0, 4, 8, 16, and 24 mM) of N for an additional 30 d. These five N application levels corresponded to leaf N concentrations of 2.62, 3.48, 4.00, 4.23, and 4.69%, respectively. We measured 13 morphological and physiological parameters, as well as the responses of these parameters to various N-fertilizer treatments. The general increases in Dickson's quality index (DQI), above-ground dry weight (DW), total DW, flowering rate, ${\Delta}F/Fm$', and qP in response to treatment with 0 to 8 mM N were similar to those of SPAD, NDVI, and Fv/Fm. Consistent and strong correlations ($R^2$= 0.60 to 0.85) were observed between leaf N concentration (%) and SPAD, NDVI, ${\Delta}F/Fm$', and above-ground DW. Validation of leaf S PAD, NDVI, and ${\Delta}F/Fm$' revealed that these vegetation indices are accurate predictors of leaf N concentration that can be used for non-destructive estimation of the proper timing for N-solution irrigation of P. lanceolata. Moreover, irrigation with 8 mM N-fertilizer i s recommended w hen leaf N concentration, SPAD, NVDI, and ${\Delta}F/Fm$' ratios are reduced from their saturation values of 4.00, 50.68, 0.64, and 0.137%, respectively.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• 에너지공학
• /
• 제24권4호
• /
• pp.166-174
• /
• 2015

본 연구에서는 물성 변화에 따라 자동차 성능 및 환경에 미치는 영향을 살펴보기 위하여 휘발유 대비 물성이 상이한 연료를 선정하여 연소특성을 살펴보았다. 실험은 각 연료에 맞는 점화시기 및 공연비제어를 수행하여 물성변화에 따른 최적의 점화시기와 희박연소에 에서의 연소특성을 살펴보았으며, 그에 따른 배출가스도 평가하였다. 실험을 위해 단기통 엔진을 사용하였으며, 휘발유 물성변화를 위해 "석유 및 석유대체사업법"에 고시된 품질기준을 벗어나는 가짜연료를 선정하여 실험을 수행하였다. 그 결과 선정된 연료의 경우 옥탄가와 증류성상, 증기압에서 차이를 보였으며, 불안정 연소 및 다량의 유해배출가스를 유발함을 알 수 있었다.

• 음성과학
• /
• 제1권
• /
• pp.153-200
• /
• 1997

In languages such as Japanese, it is very common to observe that short peripheral vowel are completely voiceless when surrounded by voiceless consonants. This phenomenon has been known as Montreal French, Shanghai Chinese, Greek, and Korean. Traditionally this phenomenon has been described as a phonological rule that either categorically deletes the vowel or changes the [+voice] feature of the vowel to [-voice]. This analysis was supported by Sawashima (1971) and Hirose (1971)'s observation that there are two distinct EMG patterns for voiced and devoiced vowel in Japanese. Close examination of the phonetic evidence based on acoustic data, however, shows that these phonological characterizations are not tenable (Jun & Beckman 1993, 1994). In this paper, we examined the vowel devoicing phenomenon in Korean using data from ENG fiberscopic and acoustic recorders of 100 sentences produced by one Korean speaker. The results show that there is variability in the 'degree of devoicing' in both acoustic and EMG signals, and in the patterns of glottal closing and opening across different devoiced tokens. There seems to be no categorical difference between devoiced and voiced tokens, for either EMG activity events or glottal patterns. All of these observations support the notion that vowel devoicing in Korean can not be described as the result of the application of a phonological rule. Rather, devoicing seems to be a highly variable 'phonetic' process, a more or less subtle variation in the specification of such phonetic metrics as degree and timing of glottal opening, or of associated subglottal pressure or intra-oral airflow associated with concurrent tone and stricture specifications. Some of token-pair comparisons are amenable to an explanation in terms of gestural overlap and undershoot. However, the effect of gestural timing on vocal fold state seems to be a highly nonlinear function of the interaction among specifications for the relative timing of glottal adduction and abduction gestures, of the amplitudes of the overlapped gestures, of aerodynamic conditions created by concurrent oral tonal gestures, and so on. In summary, to understand devoicing, it will be necessary to examine its effect on phonetic representation of events in many parts of the vocal tracts, and at many stages of the speech chain between the motor intent and the acoustic signal that reaches the hearer's ear.

• 정신신체의학
• /
• 제6권1호
• /
• pp.46-58
• /
• 1998

Objectives : This study was performed to evaluate the status of psychiatric consultation at a newly opened university hospital, to explore problems related to psychiatric consultation and to contribute for future consultation to be more systematic and more efficient. Methods: The subjects of this study were 284 patients hospitalized at Inha University Hospital between September 1, 1996 and August 31, 1997, who were referred for psychiatric consultation during hospitalization. This study was evaluated demographical characteristics of referred patients, resons for referral, recommendations by psychiatric consultant, clinical diagnoses, psychiatric diagnoses, relationship between referral time and hospitalization following the day of consultation and consultation referral types based upon psychiatrists' reports and patients' medical charts. Results : Most common patients referred to consultation were females aged 20s who visited at the department of internal medicine and related to the risk of suicidal attempts. Mood disorder was the most frequent psychiatric diagnosis, and the most common recommendations were to use psychopharmacological treatment along with outpatient visits. The 30% of subjects were referred to consultation within a day after hospitalization. In the case of consultation referral timing within two days and after three days, there was significant difference between early consultation and shorter hospitalization following the day of consultation. Most frequent type of consultation(29.6%) was categorized as IIIa type(physical complication type as a "Mending" request type). Conclusion : In review of consultation referral timing and consultation referral type of the subjects, who were referred for psychiatric consultation for one year at a newly opened University Hospital, referrals were found to be made within two days after their admission to hospital(50.7%), which was observed to be early request. We found that there was significant association between early consultation and shorter hospitalization following the day of consultation. The physical complication type(29.6%) which belongs to "Mending" request type was found to be the most frequent consultation referral type. This result indicates that more systematic psychiatric consultation is needed for the future.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.27-33
• /
• 2017

Objectives: To determine the optimal timing for post space preparation of root canals sealed with epoxy resin-based AH Plus sealer in terms of its polymerization and influence on apical leakage. Materials and Methods: The epoxy polymerization of AH Plus (Dentsply DeTrey) as a function of time after mixing (8, 24, and 72 hours, and 1 week) was evaluated using Fourier transform infrared (FTIR) spectroscopy and microhardness measurements. The change in the glass transition temperature ($T_g$) of the material with time was also investigated using differential scanning calorimetry (DSC). Fifty extracted human single-rooted premolars were filled with gutta-percha and AH Plus, and randomly separated into five groups (n = 10) based on post space preparation timing (immediately after root canal obturation and 8, 24, and 72 hours, and 1 week after root canal obturation). The extent of apical leakage (mm) of the five groups was compared using a dye leakage test. Each dataset was statistically analyzed by one-way analysis of variance and Tukey's post hoc test (${\alpha}=0.05$). Results: Continuous epoxy polymerization of the material with time was observed. Although the $T_g$ values of the material gradually increased with time, the specimens presented no clear $T_g$ value at 1 week after mixing. When the post space was prepared 1 week after root canal obturation, the leakage was significantly higher than in the other groups (p < 0.05), among which there was no significant difference in leakage. Conclusions: Poor apical seal was detected when post space preparation was delayed until 1 week after root canal obturation.