• Journal of Family Relations
• /
• v.22 no.3
• /
• pp.47-72
• /
• 2017

Objectives: Do husbands with working wives share domestic labor more equally than husbands with unemployed housewives? Is the husband's contribution sufficient enough to satisfy his wife? These questions have long inspired many researchers to find ways to more accurately estimate husband's domestic contributions and narrow the emotional gap following the different threshold of satisfaction within couples, but not without some limits. This study attempted to figure out an answer to the above-mentioned subject by using time diaries of Korean married couples with a preschooler as their first-born child and relying on the typology of husbands' sharing of housework and childcare, which allowed me to overcome some limitations of prior research. Method: I analyzed a total of 1,716 diaries of 858 married couples from 2014 Korea Time Use Survey with descriptive statistics, t-test, cluster analysis, and multinomial logit. Results: Analytic results showed that husbands in dual-earner households did share domestic labor more equally than husbands in single-earner households, but there were different types of husband's contribution depending on time they spent in housework and childcare. While more than half of husbands with employed wives shared more or less than ten percent of domestic labor, the rest were divided into one group of husbands who shared both housework and childcare more heavily and evenly, and another group who were mainly involved in childcare duties. It is interesting that husbands who made the least contributions to domestic labor were not the ones with the lowest level of satisfaction with their sharing of household labor, whereas their wives were deeply dissatisfied, leading to a huge emotional gap within couples. Conclusion: Identifying factors associated with the three different types allowed me to find a point of intervention to narrow the emotional gap that is likely to harm the marital relationship if left unattended to.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1
• /
• pp.32-41
• /
• 2007

The control room has been usually designed by the consideration of only one listening position for the sound engineer. By this study. many listening positions with the very similar acoustical condition were located in the specific region, so-called 'the reflection free zone', where the several engineer could evaluate the quality of sound at the same time. For constructing the reflection free zone, the control room has been designed by the concept of the $LEDE^{TM}$, and the initial time delay gap has been controled by the structure of control room and the properties of sound-absorbing materials. diffuser, Helmholtz resonator and image source of sound. The occurrence of any harmful phenomena like the standing wave, acoustic focusing. coloring. Hass effect and flutter echo, has greatly reduced in the reflection free zone.

• Journal of Families and Better Life
• /
• v.33 no.5
• /
• pp.37-53
• /
• 2015

The purpose of this study is to examine the differences in perceived time pressure between employed and non-employed married women in Korea. The sample of married couple from the Korean Time Use Survey 2009 (n = 6,948 couple diaries) was used to examined the difference in the level of perceived time pressure over the life cycle of two group. This study also investigated the married women's time use, husband's time use as well as hour of domestic outsourcing and whether such factors are associated with lowering perceived time pressure of married women. Results showed employed wives felt almost 3 times more time pressed than non-employed wives, and the gap mostly remained over different life cycles. Total work hours were associated with increasing the time pressure of both groups of women, while regenerating time was associated with ameliorating time pressure. The result suggests that the time pressure gap between employed and non-employed wives can be partly due to the relative length of total labor hours and regenerating time among the two groups. Ordered logit analysis revealed that husband's paid work hours were not associated with wive's feeling rushed, but husband' unpaid work hours were positively linked with time pressure of their wives. Results indicated if employed or non-employed wives are feeling very busy, there is a high chance that husband might give them some help. We found employed wives spend more hours on housework outsourcing, and purchasing goods for housework was not associated with lowering the feeling of pressure of employed wives. There were both similarity and difference in factors associated with women's feeling pressed among employed and non-employed wives. It implies that social process and it's strategies to alleviate the time pressure can be different by women's employment status.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.

• Human Ecology Research
• /
• v.58 no.2
• /
• pp.255-266
• /
• 2020

This study observed and investigated the commute time of dual-earner couples from a family developmental perspective. It tested whether the household responsibility hypothesis was effective in explaining the gender gap in the commute time for these couples. I extracted 2,103 time diaries written by 1,266 matched couples from the 2014 Korean Time Use Survey data for this study. The sample was categorized by the age of the eldest child into four age groups of 0-6, 7-12, 13-18, and 19-29. Analytic results from ANOVA, Scheffé test, and OLS regression are as follows. First, husbands traveled longer hours to work than wives in all age groups, while the commute time of couples tended to increase along with the child' age. However, couples in the child group aged 7 to 12 had the shortest commute time. Second, domestic labor time of wives were negatively associated with the commute time, which appeared to support the household responsibility hypothesis. Third, in the child group aged 7 to 12, wives spent more time for work commute as their income increased; however, wives with traditional gender role attitudes had a shorter commute time in the child group aged 0 to 6. Forth, neither the wives' nor husbands' work characteristics were related to the wives' commute time; however, both wives' and husbands' work characteristics were related to the husbands' commute time. The findings suggest the possibility of spatial entrapment by working wives throughout the family life cycle due to household responsibilities, which provides implications for policy intervention in consideration of the gender gap in commute time for dual-earner couples.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.186.2-186.2
• /
• 2005

• ETRI Journal
• /
• v.39 no.4
• /
• pp.546-557
• /
• 2017

In a long term evolution-advanced (LTE-A) system, the traffic overload of machine type communication devices is a challenge because too many devices attempt to access a base station (BS) simultaneously in a short period of time. We discuss the challenge of the gap between the theoretical maximum throughput and the actual throughput. A gap occurs when the BS cannot change the number of preambles for a random access channel (RACH) until multiple numbers of RACHs are completed. In addition, a preamble partition approach is proposed in this paper that uses two groups of preambles to reduce this gap. A performance evaluation shows that the proposed approach increases the average throughput. For 100,000 devices in a cell, the throughput is increased by 29.7% to 114.4% and 23.0% to 91.3% with uniform and Beta-distributed arrivals of devices, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.176-179
• /
• 2004

The effects of a temporal image sticking phenomenon on the subsequent dark and white background images are investigated in 42-inch PDP-TV and the reducing method is proposed In addition, the changes in luminance and temperature with an increase in time with the conventional and large sustain gap. The temporal dark image sticking was reduced considerably by decreasing background luminance and it was found that the temporal image sticking with large sustain gap was reduced when compared with the conventional sustain gap.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.149-157
• /
• 2000

Computer simulations of the mechanical behavior of a three point bend specimen with a quarter notch under impact load are performed. The case with a load application point at the side is considered. An elastic-plastic von Mises material model is chosen. Three phases such as impact bouncing and bending phases are found to be identified during the period from the moment of impact to the estimated time for crack initiation. It is clearly shown that no plastic deformation near the crack tip is appeared at the impact phase. However it is confirmed that the plastic zone near the crack tip emerges in the second phase and the plastic hinge has been formed in the third phase. Gap opening displacement crack tip opening displacement and strain rate are compared with rate dependent material(visco-plastic material). The stability during various dynamic load can be seen by using the simulation of this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.47-49
• /
• 1999

The air and impurity gaps generated by a defect in homogeneous material have a difference index of refraction compare to the homogeneous material. Therefore an electromagnetic wave has a multiple reflection between the two indices of refraction. If the gap has a small thickness, it is difficult to know the gap in time domain. However, the presence of the gaps can be known in frequency domain by total transmission and phase difference. Also, the thickness and index of refraction can be measured by well known Febry-Perot theory.