• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.56-57
• /
• 2006

Porosity in spray-formed materials is an important issue, but the formation of porosity is not completely understood. The paper gives some examples picked from literature, which show some general correlations between process parameters and porosity. To improve the understanding of porosity formation it is necessary to know more about the conditions of the droplets and the deposit at the point of impingement. Determining the impact conditions is a challenge because usually they are not constant with time and some values are difficult to measure. Our experiments show a strong correlation between the deposit surface temperature and the porosity. The average impact angle weighted by the local particle mass flux is also an important parameter.

• 산업공학
• /
• 제20권2호
• /
• pp.94-102
• /
• 2007

Portfolio management deals with decision making on 'when' and 'how' to revise an existing portfolio. In this paper, we show that a classical statistical process control (SPC) chart for normal data, a wellestablished tool in quality engineering, can effectively be used for signaling times for revising a portfolio. Noting that the day-to-day performance of a portfolio may be auto-correlated, we use the exponentially weighted moving average center-line chart to develop an automatic portfolio management procedure. The portfolio management procedure is extensively tested on historical data of equities traded in the Korea Exchange (KRX), the American Stock Exchange (AMEX), and the New York Stock Exchange (NYSE). In comparison with the performances of the KOSPI, XAX, and NYA indices during the same time periods, results from these experiments show that SPC chart-based portfolio revision presents itself a convenient and reliable method for optimally managing portfolios.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.193-198
• /
• 1983

In the determination of organic solvents in workplaces direct reading tube method have been used in Korea for decades. But this method is less accurate and couldn't measure TWA(Time Weighted Average) for 8 hours. Authors tried to detect Toluene concentration in S factory by using charcoal tube according to NIOSH method. The concentration was 158.8ppm. We propose this charcoal tube method should be substituted to get accurate results and to protect employee in workplaces related with solvents.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.280-283
• /
• 2023

Objectives: The purpose of this study was to examine the change in exposure concentration in the cleaning process after installing a local exhaust system. Methods: Dichloromethane measurement was conducted according to the KOSHA Guide (A-19-2019). Results: After the local exhaust device was installed, a total of three measurements were conducted, including temporary work environment measurements, and all of the measurements did not exceed the DCM exposure standard, but were more than 50% of the DCM Time Weighted Average((8-TWA) Conclusions: It is thought that the local ventilation system of a small business needs not only support for the initial installation cost, but also educational support for maintaining the performance of the local ventilation system and support for consumables (adsorbents, filters, etc.) that incur periodic costs.

• 대한산업공학회지
• /
• 제26권3호
• /
• pp.193-199
• /
• 2000

In many studies, considerable attention has been focussed upon choosing a model which represents underlying process of time series and forecasting the future. In the real world, however, there may be some cases that one model can not reflect all the characteristics of original time series. Under such circumstances, we may get better performance by combining the forecasts from several models. The most popular methods for combining forecasts involve taking a weighted average of multiple forecasts. But the weights are usually unstable. In cases the assumptions of normality and unbiasedness for forecast errors are satisfied, a Bayesian method can be used for updating the weights. In the real world, however, there are many circumstances the Bayesian method is not appropriate. This paper proposes a PNN(Probabilistic Neural Net) approach as a method for combining forecasts that can be applied when the assumption of normality or unbiasedness for forecast errors is not satisfied. In this paper, PNN method, which is similar to Bayesian approach, is suggested as an updating method of the unstable weights in the combination of the forecasts. The PNN method has been usually used in the field of pattern recognition. Unlike the Bayesian approach, it requires no assumption of a specific prior distribution because it gets probabilities by using the distribution estimated from given data. Empirical results reveal that the PNN method offers superior predictive capabilities.

• 한국화재소방학회논문지
• /
• 제23권5호
• /
• pp.24-31
• /
• 2009

본 연구에서는 우리나라 주요 침엽수종인 소나무(Pinus densiflora)와 활엽수종인 굴참나무(Quercus variabilis)의 낙엽에 대해 FTIR(Fourier Transform Infrared) 분광계를 이용하여 배출 연소가스 종류 및 농도를 측정하였다. 실험결과 소나무와 굴참나무 낙엽에서 Carbon monoxide, Carbon dioxide, Acetic acid, Butyl acetate, Ethylene, Methane, Methanol, Nitrogen dioxide, Ammonia, Hydrogen Fluoride, Sulfur dioxide, Hydrogen bromide 등 13개 연소가스가 검출되었고 굴참나무 낙엽에서는 Nitrogen monoxide가 추가로 검출되었다. 방출된 연소가스의 전체 농도는 소나무 낙엽이 굴참나무 낙엽에 비해 4.5배 많이 검출되었다. 특히, 시간가중평균가스농도(Time-Weighted Average, TWA, ppm) 기준을 초과하는 연소가스는 Carbon monoxide, Carbon dioxide, Butyl acetate가 검출되었고 단시간노출기준(Short Term Exposure Limit, STEL, ppm) 기준을 초과하는 연소가스는 Carbon monoxide, Carbon dioxide로 소나무 및 굴참나무 모두에서 나타났다. 이에 산불에서의 낙엽의 지표화 연소시 전체 가스 방출량의 99% 이상을 차지하고 있는 Carbon monoxide, Carbon dioxide의 건강 위험성이 높은 것으로 나타났다.

• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.28-34
• /
• 2019

점화원이 무엇이든 화염의 확산과 인체에 영향을 미치는 직접적인 요소는 가연물이다. 음악학원, 노래방 등에서 사용하고 있는 마감재인 흡음재는 폴리우레탄으로 구성되며 연소 시 다량의 유독가스를 발생한다는 것은 알려진 사실이다. 그럼에도 현행법은 학원의 경우 수용인원 100명 미만의 경우 난연 마감재를 사용해야 한다는 강행규정이 없다. 본 연구에서는 실제 음악학원에 설치된 흡음재를 수거하여 실화재 연소실험을 통해 화염확산 속도를 측정하였으며, MultiRaelite 복합가스 측정기(타겟물질 VOC, HCHO, SO₂, CO₂, CO, HCN, NO₂)를 이용하여 유독가스를 측정한 결과 Time weighted average (TWA)와 Short term exposure limit (STEL)의 허용농도를 초과하여 기기한계값이 측정되었다. 또한 시중에 판매중인 난연 흡음재와 비난연 흡음재를 비교 연소 실험한 결과, 착화 및 확산에 있어 현격한 차이를 보였다. 따라서 실험결과를 바탕으로 수용인원 100명 미만의 학원에도 난연 마감재 사용을 강제할 필요가 있음을 제언하고자 한다.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.51-60
• /
• 2010

Objectives: The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. Methods: From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. Results: The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). Conclusion: These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

• Journal of Preventive Medicine and Public Health
• /
• 제33권3호
• /
• pp.343-348
• /
• 2000

Objectives : This study was conducted to integrate the results of studies assessing the association between chronic noise exposure and blood pressure. Methods : Using a MEDLINE search with noise exposure, blood pressure and hypertension as key words, we retrieved articles from the literature that were published from 1980 to December 1999. The criteria for quality evaluation were as follows: 1) the study subjects must have been workers employed at a high noise level area 2) The paper should use average and cumulative noise exposure as method for exposure evaluation. 3) Blood pressure in each article should be reported in a continuous scale Among the 77 retrieved articles, six studies were selected for quantitative meta-analysis. Before the integration of the regression coefficients for the association between blood pressure and noise level, homogeneity tests were conducted. Results : All studies were a cross-sectional design and the study subjects were industrial workers. Five papers used a time-weighted average for noise exposure and only one paper calculated the cumulative noise exposure level. The measurement of blood pressure in the majority of studios were accomplished in a resting stale, and used an average of two or more readings. The homogeneity of studies was rejected in a fixed effect model, so we used the results in a random effect model. The results of the quantitative meta-analysis, the weighted regression coefficient of noise associated with systolic blood pressure and diastolic blood pressure were 0.05 (95% confidence interval [CI]: -0.03, 0.13) and 0.06 (95% CI: -0.01, 0.13), respectively. Conclusions : Our results suggested that chronic exposure to industrial noise does not cause elevated blood pressure.

• 한국산림과학회지
• /
• 제101권2호
• /
• pp.213-219
• /
• 2012

제5차 국가산림자원조사는 다양한 산림자원의 현황을 평가하고 시간경과에 따른 산림자원의 변화를 모니터링하기 위하여 연년조사체계로 개편되었다. 본 연구는 충청북도를 대상으로 연년조사체계에서 수집된 현지조사 표본점 자료를 이용하여 일정시점의 평균임목축적을 추정하기 위한 방법을 모색하기 위해 수행되었다. 연년통계량의 산출을 위하여 임상구분의 표본층을 고려하지 않은 단순임의추출법과 표본층을 고려한 사후층화이중추출법의 추정식을 이용한 추정치를 비교한 결과, 사후층화이중추출법에 의한 추정치의 정확도가 높은 것으로 나타났다. 최근 5년간 수집된 현지조사 자료를 통합하기 위하여 조사년도의 차이를 고려하지 않은 시차 무시법(Temporally Indifferent Method), 조사년도별 추정치를 산출한 후 통합하는 단순이동평균법, 그리고 연도별 표본개수에 의해 가중치를 부여하는 가중이동평균법에 의한 평균임목축적과 추정분산을 비교하였다. 평균임목축적은 시차 무시법과 가중이동평균법에서 동일한 것으로 나타났지만, 추정치의 정도를 나타내는 추정분산은 가중이동평균법을 이용한 것이 약간 향상되었으며, 결과적으로 연도별 변이를 반영할 수 있는 가중이동평균법이 보다 적합한 것으로 평가되었다.