• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.35-42
• /
• 1991

Recently, HID lamps have been considered as important in regard to the trend of energy saving, and increasingly and diversely used in various ways. This paper will show the simulating models concerning high-pressure arc discharge system directly applicable for its design and manufacture, and analyze its various characteristics. For warm-up characteristics, the evaporating process of inner atoms is described in terms of second-order differential equation: for the thermal conduction from are axis to discharge wall and outer bulb, its transfer process is introduced according to five first-order differential equations. Under the steady state satisfying LTE, the time-variant characteristics are suggested by means of time-dependent energy balance equation derived from fluid equations, approximation of radiation energy and material functions in the discharge tube. The simulating models concerning these equations are then applied for high-pressure mercury lamp.

• Structural Engineering and Mechanics
• /
• v.6 no.7
• /
• pp.773-784
• /
• 1998

To assess the collapse risk of transmission line structures subject to natural hazards, it is important to identify what hazard may cause the structural collapse. In Australia and many other countries, a large proportion of failures of transmission line structures are caused by severe thunderstorms. Because the wind loads generated by thunderstorms are not only random but time-variant as well, a time-dependent structural reliability approach for the risk assessment of transmission line structures is essential. However, a lack of appropriate stochastic models for thunderstorm winds usually makes this kind of analysis impossible. The intention of the paper is to propose a stochastic model that could realistically and accurately simulate wind loading due to severe thunderstorms. With the proposed thunderstorm model, the collapse risk of transmission line structures under severe thunderstorms is assessed numerically based on the computed failure probability of the structure.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.193-196
• /
• 2000

In this paper, the performance of DS-CDMA system with smart antenna is analyzed for different bandwidths (1.25MHz, 5MHz) and different channel environments (rural, urban). For the analysis of smart antenna system, the vector channel model having the spatio-temporal correlation is needed. Hence, the channel is modeled as a time-variant linear filter in time, and each multipath is assumed as a reflective wave from only one direction (only one cluster) in space. A simulation is carried out by dividing several multipaths within one chip into each one and searching the strongest signal. DS-CDMA system with smart antenna using wider bandwidth present better performance than that using narrow bandwidth. It is shown that the smart antenna is more effective in urban area when using 2D-RAKE receiver.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.525-534
• /
• 2015

A new structural dynamic fuzzy reliability analysis under stochastic loads which are applied several times is proposed in this paper. The fuzzy reliability prediction models based on time responses with and without strength degeneration are established using the stress-strength interference theory. The random loads are applied several times and fuzzy structural strength is analyzed. The efficiency of the proposed method is demonstrated numerically through an example. The results have shown that the proposed method is practicable, feasible and gives a reasonably accurate prediction. The analysis shows that the probabilistic reliability is a special case of fuzzy reliability and fuzzy reliability of structural strength without degeneration is also a special case of fuzzy reliability with structural strength degeneration.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.79-82
• /
• 2000

In this paper, the performance of 05-CDMA system with smart antenna is analyzed for different bandwidths (1.25MHz, 5MHz) and different channel environments (rural, urban). For the analysis of smart antenna system, the vector channel having the spatio-temporal correlation is modeled as a time-variant linear filter in time, and each multipath is assumed as a reflective wave from only one direction (only one cluster) in space. Several multipaths within one chip are distinguished into each one and the strongest signal is selected. DS-CDMA system with smart antenna using wider bandwidth present better performance than that using narrow bandwidth. It is shown that the smart antenna is more effective in urban area when using 2D-RAKE receiver.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.479-482
• /
• 2000

다중경로 채널의 시변 특성은 OFDM(orthogonal frequency division multiplexing) 신호의 직교성을 파괴시키며 이는 인접 채널간 간섭(ICI: interchannel interference)을 발생시켜 도플러 주파수에 비례하는 오류를 발생시킨다. 본 논문에서는 채널 시변의 원인을 주파수 옵셋과 도플러효과로 규정하고, 주파수 옵셋을 보정하기 위해 기존의 선형보간법(LI: linear interpolation method)대신 선형위상보간법(LPI: linear phase interpolation)과 도플러효과에 의한 ICI 를 제거하기 위해 기존의 주파수영역 등화기법보다 효과적인 시간영역 등화기법을 제안한다. 제안된 기법이 주파수 옵셋이 있는 시변 다중경로 페이딩 환경에서 OFDM 시스템에 적합함을 컴퓨터 모의실험을 통해 확인한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.161-165
• /
• 1999

다중경로 채널의 시변 특성은 OFDM(orthogonal frequency division multiplexing) 신호의 직교성을 파괴시키며 이는 인접 채널간 간섭(ICI: inter channel interference)을 발생시켜 도플러 주파수에 비례하는 오류를 발생시킨다. 본 논문에서는 채널 시변의 원인을 주파수 옵셋과 도플러효과로 규정하고, 주파수 옵셋을 보정하기 위해 기존의 선형보간법(LI: linear interpolation method)대신 선형위상보간법(LPI: linear phase interpolation)과 도플러효과에 의한 ICI를 제거하기 위해 기존의 주파수영역 둥화기법보다 효과적인 시간영역 등화기법을 제안한다. 제안된 기법이 주파수 옵셋이 있는 시변다중경로 페이딩 환경에서 OFDM 시스템에 적합함을 컴퓨터 모의실험을 통해 확인한다.

• Communications for Statistical Applications and Methods
• /
• v.13 no.3
• /
• pp.491-501
• /
• 2006

We consider a multiple change point model with autoregressive conditional heteroscedasticity (ARCH). The model assumes that all or the part of the parameters in the ARCH equation change over time. The occurrence of the change points is modelled as the discrete time Markov process with unknown transition probabilities. The model is estimated by Markov chain Monte Carlo methods based on the approach of Chib (1998). Simulation is performed using a variant of perfect sampling algorithm to achieve the accuracy and efficiency. We apply the proposed model to the simulated data for verifying the usefulness of the model.

• Journal of Korea Multimedia Society
• /
• v.19 no.1
• /
• pp.22-29
• /
• 2016

Hidden Markov Model is one of the most successful and popular tools for modeling real world sequential data. Real world signals come in a variety of shapes and variabilities, among which temporal and spectral ones are the prime targets that the HMM aims at. A new problem that is gaining increasing attention is characterizing missing observations in incomplete data sequences. They are incomplete in that there are holes or omitted measurements. The standard HMM algorithms have been developed for complete data with a measurements at each regular point in time. This paper presents a modified algorithm for a discrete HMM that allows substantial amount of omissions in the input sequence. Basically it is a variant of Baum-Welch which explicitly considers the case of isolated or a number of omissions in succession. The algorithm has been tested on online handwriting samples expressed in direction codes. An extensive set of experiments show that the HMM so modeled are highly flexible showing a consistent and robust performance regardless of the amount of omissions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.451-462
• /
• 2003

At the paper the method of 3D holographic moving image reconstruction is discused. The main idea of this method is based on the substitution of optically created static hologram by equal diffraction array created by acoustical (AO) field which formed by bulk sound waves. Such sound field can be considered as dynamic optical hologram, which is electrically controlled. At the certain moment of time when the whole hologram already formed, the reference optical beam illuminates it, and due to acoustooptical interaction the original optical image is reconstructed. As the acoustically created dynamic optical hologram is electronically controlled, it can be used for moving 3-dimentional scene reconstruction in real time. The architecture of holographic display for moving scene reconstruction is presented at this paper. The calculated variant of such display laboratory model is. given and discussed. The mathematical simulation of step by step images recording and reconstruction is given. The pictures of calculated reconstructed images are presented. The prospects, application areas, shortcomings and main problems are discussed.