• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.695-699
• /
• 2003

It is general to use the control network in control systems in order to reduce the complexity of the related wiring harnesses and to improve the system flexibility. CAN becomes one of the most popular network protocols because of its low price, multiple sources, high performance and reliability. This paper describes a CAN based real-time control of the fire detection system for the intelligent building system. The proposed fire detection and alarm system is stronger than the previous one against noises and communication media faults and can solve many problems such as complex cabling and increment of I/O ports by using many sensors. Furthermore, MMI can be achieved easily with the personal computer that is used for replacing the traditional monitoring system. The proposed system is implemented and the experimental results are given.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.25-33
• /
• 2008

This paper presents a new approach of a evaluation of location marginal prices(LMPs) considering demand response resources in the competitive electricity market. The stabilization of the electric power supply and demand balance has been one of the major important activities in electric power industry. Recently, much attention is paid to the demand-side resources which are responsive to incentives or time-varying prices and existing power system planning and operation activities are incorporated with the so-called demand response resources. In this paper, we first present an analytical method for calculation of LMPs considering demand response resources and then break down the LMPs into three components. In this study, we assume that Korean power system consists of two major regions, one which is the metropolitan and the other is non-metropolitan region. In the case study, we have considered several LMPs cases with different use of locational demand response resource and we can obtain a locational signal to demand response resources. Also, the economics of demand response resources are evaluated, compared with the increase of transmission line capacity and of generation capacity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.291-297
• /
• 2010

A system called demand response programs (DRP) is being introduced among various countries owing to the lack of new generation capacity and the higher fuel generation cost. It is a program which provides for the end-users to select their consumption of electricity by recognizing the value of their consumption in real time. That is, Demand Response can be defined as the changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity or other signals. It is expected that the effects of DRP are preventing price spike, improving supply reliability and social welfare and increasing option of customers. Considering the customer's thermal comfort zone, this paper determines the most profitable combination of optimal incentives and amounts of load reduction for a retailer to maximize profits according to predicted outdoor temperatures while implementing DRP.

• Advances in Energy Research
• /
• v.7 no.2
• /
• pp.85-100
• /
• 2020

Distributed energy resources (DERs) are essential for coping with growing multiple energy demands. A microgrid (MG) is a small-scale version of the power system which makes possible the integration of DERs as well as achieving maximum demand-side management utilization. Hence, this study focuses on the analysis of optimal power dispatch considering economic aspects in a multi-carrier microgrid (MCMG) with price-responsive loads. This paper proposes a novel time-based demand-side management in order to reshape the load curve, as well as preventing the excessive use of energy in peak hours. In conventional studies, energy consumption is optimized from the perspective of each infrastructure user without considering the interactions. Here, the interaction of energy system infrastructures is considered in the presence of energy storage systems (ESSs), small-scale energy resources (SSERs), and responsive loads. Simulations are performed using GAMS (General Algebraic modeling system) to model MCMG, which are connected to the electricity, natural gas, and district heat networks for supplying multiple energy demands. Results show that the simultaneous operation of various energy carriers, as well as utilization of price-responsive loads, lead to better MCMG performance and decrease operating costs for smart distribution grids. This model is examined on a typical MCMG, and the effectiveness of the proposed model is proven.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.3
• /
• pp.175-188
• /
• 2000

This study was to investigate the consumption pattern, behaviors, and motivational attitudes related to fruit and vegetables. Data were collected from 344 mothers whose children were attending an elementary school and a middle school in Kimcheon. The average vegetable expenses were under 10,000 won per week. The frequency of purchasing vegetables was 2-3 times a week. Housewives usually bought the vegetables at local markets and grand shopping centers. As for buying vegetables, housewives considered the organic vegetables, preference, price, and nutrition in order. In the family, the vegetables were favored by husbands most and by sons least. The average fruit expenses were under 10,000 won per week. The frequency of purchasing fruit was 2-3 times a week. Housewives usually bought the fruit at local markets and grand shopping centers. As for buying fruit, housewives considered preference, price, and nutrition in order. The fruit were favored by all members most and by husbands least. Housewives identified barriers to increasing vegetables and fruit consumption, including preference for other foods, lack of availability, cost, and time and effort to prepare. Several implications for nutrition interventions were suggested. First, a key motivation for these women was eating healthy food when they are pregnant, suggesting a persuasive appeal to use in interventions. Second, review of the women's current behaviors led to an identification of four specific behaviors that had the most potential for increasing overall consumption. Finally, the findings suggested ways in which nutrition interventions could address each of the barriers identified.

• The Korean Journal of Food & Health Convergence
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2022

The term "Organic Food" is no longer strange to consumers around the world. Many people are concerned about their safety and health, so they have chosen this safe food. However, the decision to buy this product still faces some difficulties and challenges, such as the high price of organic products, short-time use, supply of products and so on. This study conducted an analysis to investigate the determinants of Danang City consumers' intention to purchase organic foods in Vietnam. The results show that, there are 6 influencing factors, including: subjective norm, food safety & health consciousness, consumer knowledge & environment consciousness, price of the product, availability product and trust in brands and certifications. The study uses a combination of 2 qualitative and quantitative methods. Qualitative methods are used through analysis, evaluation and synthesis of previous studies to build research models and scales for variables. Quantitative method with 250 samples applied SPSS 25.0 to test the scale by Cronbach's Alpha coefficients, to analyze the discovery factor EFA and regression analysis. The findings of the study provide useful information for consumers to buy organic foods and for marketers to increase sale of organic foods in Vietnam in general and Danang city in particular.

• IE interfaces
• /
• v.15 no.3
• /
• pp.279-285
• /
• 2002

A break-even analysis is a method used widely for profit planning or decisions in most companies. It is useful tool in financial studies because it is simple and offers useful insights from a modest amount of data. Although it is widely used, it has some weaknesses. It is limited in particular to the analysis for a short term time horizon or one period. We suggest a new break-even procedure to analyze projects with a long term time horizon as keeping the simplicity of a conventional break-even analysis. We will make efforts doing to include actual data for a cost or an income as much as possible rather than developing a mathematical model to improve unreality of a traditional break-even analysis. Also, we will use the spreadsheet software to solve problems.

• Journal of the Korea Society for Simulation
• /
• v.11 no.3
• /
• pp.49-58
• /
• 2002

It takes 2 or 3 months to manufacture memory device. Defect has to exist owing to hundreds of processes. If there are too many defects, the memory has to be rejected. But if there are a few defects, it will be more efficient and cost reducing for the company to use it by repairing. Therefore, laser-repair process is needed for such a reason and redundancy analysis is needed to establish correct target of laser-repair process. The equipment development company had provided the redundancy analysis and each development company had developed and provided separately. So, to analyze the similar type of defects, redundancy analysis time can be very different by the manufacture. The purpose of this research is to strengthen the competitive price and to apply correlation concept in business for reducing the redundancy analysis time to repair the defects

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1128-1131
• /
• 2004

SFF(solid freeform fabrication) is another name of RP(rapid prototyping). The SFFS for office type wishes to develop system that can produce small object such as hand phone, cup, accessory etc. with high speed, and also intend suitable system in office environment by compact design, and buy easily by inexpensive price. As can manufacture high speed in existent SFF process technology, representative process that have competitive power in price is 3DP (three dimensional printing) technology. The 3DP technology is way to have general two dimensional printing technology and prints to three dimension, is technology that make three-dimensional solid freeform that want binder doing jetting selectively on powder through printer head. We designed and manufactured SFFS for office based on 3DP process technology design and manufactured, and composed head system so that use 3 printer heads at the same time to improve the fabrication speed of system. We used printer head of INCJET company and cartridge used HP45 series model who can buy easily in general city. And we directly fabricated three dimensional solid freeform using developed SFFS for office type.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.343-356
• /
• 2011

This paper proposes an accelerated life evaluation of drive shaft. The life test of drive shaft for independent suspension type AWD vehicle should be performed by use of the least test sample because many number of samples can't be used for the test because of its mass capacity and high price. We calculated the no failure test time by application of no failure test concept, and the already performed test data for drive shaft are applied for some kinds of reliability coefficients which are needed for calculation of life test time. And, for analysis of real driving condition of vehicle, the load spectrum is prepared using the needed road condition and vehicle data. The inverse power model is used for accelerated life test. The equivalent torque of load spectrum is achieved by use of Miner's Rule, and then the final accelerating condition is determined by decision of the accelerated test torque. This paper shows that the accelerated life test results corresponds with the target life and the proposed life test method can be very well applied to no failure life test for mass capacity machinery components.