• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.484-489
• /
• 2020

In this study, acoustic and viscosity data are collected in real time during the ball milling process and analyzed for correlation. After fast Fourier transformation (FFT) of the acoustic data, changes in the signals are observed as a function of the milling time. To analyze this quantitatively, the frequency band is divided into 1 kHz ranges to obtain an integral value. The integrated values in the 2-3 kHz range of the frequency band decrease linearly, confirming that they have a high correlation with changes in viscosity. The experiment is repeated four times to ensure the reproducibility of the data. The results of this study show that it is possible to estimate changes in slurry properties, such as viscosity and particle size, during the ball milling process using an acoustic signal.

• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.129-135
• /
• 2012

The simultaneous-source full waveform inversion improves the applicability of full waveform inversion by reducing the computational cost. Since this technique adopts simultaneous multi-source for forward modeling, unwanted events remain in the residual seismograms when the receiver geometry of field acquisition is different from that of numerical modeling. As a result, these events impede the convergence of the full waveform inversion. In particular, the streamer-type data with limited offsets is the most difficult data to apply the simultaneous-source technique. To overcome this problem, the global-correlation-based objective function was suggested and it was successfully applied to the simultaneous-source full waveform inversion in time domain. However, this method distorts residual wavefields due to the modified objective function and has a negative influence on the inversion result. In addition, this method has not been applied to the frequency-domain simultaneous-source full waveform inversion. In this paper, we apply a timedamping function to the observed and modeled data, which are used to compute global correlation, to minimize the distortion of residual wavefields. Since the damped wavefields optimize the performance of the global correlation, it mitigates the distortion of the residual wavefields and improves the inversion result. Our algorithm incorporates the globalcorrelation-based full waveform inversion into the frequency domain by back-propagating the time-domain residual wavefields in the frequency domain. Through the numerical examples using the streamer-type data, we show that our inversion algorithm better describes the velocity structure than the conventional global correlation approach does.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. This sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than loom.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.89-98
• /
• 2020

Prediction of clock behaviors is necessary to generate very high stable system time which is essential for a satellite navigation system. For the purpose, we applied the Auto-Regressive Integrated Moving Average (ARIMA) model to the prediction of two hydrogen masers' behaviors with respect to the rapid Coordinated Universal Time (UTCr). Using the packaged programming language R, we made an analysis and prediction of time series data of [UTCr - clocks]. The maximum variation width of the residuals which were obtained by the difference between the predicted and measured values, was 6.2 ns for 106 days. This variation width was just one-sixth of [UTCr-UTC (KRIS)] published by the BIPM for the same period. Since the two hydrogen masers were found to be strongly correlated, we applied the Vector Auto-Regressive Moving Average (VARMA) model for more accurate prediction. The result showed that the prediction accuarcy was improved by two times for one hydrogen maser.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.781-787
• /
• 2005

The correlation dimension can provide some intrinsic Information of an underlying dynamic system by reconstructing measured nonlinear time series. The vibration signals measured from a rotor with different clearance sizes between shaft and bushing were analyzed using the correlation dimension. The results showed that the correlation dimension can identify the size of the clearance of a rotor and the lubricating condition, which can not be analyzed by frequency spectrum or wavelet. The magnitude of the correlation dimension became smaller as the clearance larger and as the lubrication condition better.

• Journal of Korean Home Economics Education Association
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2000

The purpose of this study was to analyse the relationship between behaviors of the video game(frequency, time career) and related variables in middle and high school boys. The data were collected using questionnaires from 342 boys. The major results of this study are summarized as follows : (1) A correlation between the frequency and the time of video game was significant. but correlations between the career and the frequency. the time of video game were not significant. (2) The frequency of video game showed significant relationship with place. preference formation, relative preference. and parents involvement. The time of video game showed significant relationships with place. preference formation, relative preference, and cost. The career showed significant relationship with place and cost.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.401-407
• /
• 2021

The continuous active sonar technology is effective for detecting and tracking targets because of short target revisiting rate. Generalized Sinusoidal Frequency Modulation (GSFM) pulses suitable for continuous active sonar systems are known to be capable of obtaining high time-bandwidth product while maintaining the orthogonality between pulses. However, it is unknown how to calculate an appropriate length of time to correlate received GSFM pulses in the presence of a target with acceleration. In this paper, we propose a method to calculate the appropriate time length based on the correlation when matching the received signal in the continuous active sonar system using GSFM pulse. The proposed method calculates the correlation according to the acceleration of the target and calculates the signal processing length according to the correlation. It is shown that stable detection performance can be obtained when the signal processing length calculated by the proposed method through the level of the sidelobe is applied.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.185-192
• /
• 2010

This paper presents a hardware-efficient auto-correlation scheme for the synchronization of MIMO-OFDM based wireless local area network (WLAN) systems, such as IEEE 802.11n. Carrier frequency offset (CFO) estimation for the frequency synchronization requires high complexity auto-correlation operations of many training symbols. In order to reduce the hardware complexity of the MIMO-OFDM synchronization, we propose an efficient correlation scheme based on time-multiplexing technique and the use of reduced samples while preserving the performance. Compared to a conventional architecture, the proposed architecture requires only 27% logic gates and 22% power consumption with acceptable BER performance loss.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• PNF and Movement
• /
• v.8 no.1
• /
• pp.67-77
• /
• 2010

Purpose : The purpose of this study was to investigate the usefulness of clinical balance tests through the correlation of balance evaluation using by forceplate in elderly. Methods : Thirty nine healthy elderly subjects (14 males, 25 females) participated in the study. The subjects were evaluated with clinical balance tests [(Berg balance scale (BBS), Functional reach test (FRT), Tinetti's performance oriented mobility assessment (POMA), and one leg standing (OLS)]. Static balance evaluation was assessed by using forceplate. Center of pressure (COP) parameters were obtained using it as total path distance, total sway area, X mean frequency and Y mean frequency for 20 seconds in the following conditions: (1) comfortable standing with eyes opened and closed, (2) uncomfortable standing with eyes opened and closed. After static balance evaluation tested, dynamic balance evaluation was assessed. COP parameters were error distance and area during sine curve trace. COP parameters were movement time, error distance, and maintained time in the circle during COP movement task. Results : Clinical balance tests showed statistically significant correlation between static and dynamic balance evaluations. Among the clinical balance tests, the BBS, POMA, and OLS showed significant correlation with to assess the balance ability of elderly in clinical setting both evaluations. Conclusion : Clinical balance tests can be recommended in clinical setting because of low costs and simplicity.