• Knowledge Management Research
• /
• v.24 no.2
• /
• pp.241-262
• /
• 2023

The phenomena and game records that occur in sports matches are being analyzed in the field of sports game analysis, utilizing advanced technologies and various scientific analysis methods. Among these methods, social network analysis is actively employed in analyzing pass networks. As football is a representative sport in which the game unfolds through player interactions, efforts are being made to provide new insights into the game using social network analysis, which were previously unattainable. Consequently, this study aims to analyze the changes in pass networks over time for a specific football team and compare them in different scenarios, including variations in the game's nature (Qatar World Cup games vs. A match games) and alterations in the opposing team (higher FIFA rankers vs. lower FIFA rankers). To elaborate, we selected ten matches from the games of the Korean national football team following Coach Bento's appointment, extracted network indicators for these matches, and applied four indicators (efficiency, cohesion, vulnerability, and activity/leadership) from a football team's performance evaluation model to the extracted data for analysis under different circumstances. The research findings revealed a significant increase in cohesion and a substantial decrease in vulnerability during the analysis of game performance over time. In the comparative analysis based on changes in the game's nature, Qatar World Cup matches exhibited superior performance across all aspects of the evaluation model compared to A matches. Lastly, in the comparative analysis considering the variations in the opposing team, matches against lower FIFA rankers displayed superior performance in all aspects of the evaluation model in comparison to matches against top FIFA rankers. We hope that the outcomes of this study can serve as essential foundational data for the selection of football team coaches and the development of game strategies, thereby contributing to the enhancement of the team's performance.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.52-58
• /
• 2023

With the increasing awareness of the importance of carbon neutrality in response to global climate change, the utilization of hydrogen as a carbon-free fuel source is also growing. Hydrogen is commonly used in fuel cells (FC), but it can also be utilized in internal combustion engines (ICE) that are based on combustion. Particularly, ICEs that already have established infrastructure for production and supply can greatly contribute to the expansion of hydrogen energy utilization when it becomes difficult to rely solely on fuel cells or expand their infrastructure. However, a disadvantage of utilizing hydrogen through combustion is the potential generation of nitrogen oxides (NOx), which are harmful emissions formed when nitrogen in the air reacts with oxygen at high temperatures. In particular, for the EURO-7 exhaust regulation, which includes cold start operation, efforts to reduce exhaust emissions during the warm-up process are required. Therefore, in this study, the characteristics of nitrogen oxides and fuel consumption were investigated during the warm-up process of cooling water from room temperature to 88℃ using a 2-liter direct injection spark ignition (SI) engine fueled with hydrogen. One advantage of hydrogen, compared to conventional fuels like gasoline, natural gas, and liquefied petroleum gas (LPG), is its wide flammable range, which allows for sparser control of the excessive air ratio. In this study, the excessive air ratio was varied as 1.6/1.8/2.0 during the warm-up process, and the results were analyzed. The experimental results show that as the excessive air ratio becomes sparser during warm-up, the emission of nitrogen oxides per unit time decreases, and the thermal efficiency relatively increases. However, as the time required to reach the final temperature becomes longer, the cumulative emissions and fuel consumption may worsen.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.434-441
• /
• 2023

Determining the size or area of a plant's leaves is an important factor in predicting plant growth and improving the productivity of indoor farms. In this study, we developed a convolutional neural network (CNN)-based model to accurately predict the length and width of lettuce leaves using photographs of the leaves. A callback function was applied to overcome data limitations and overfitting problems, and K-fold cross-validation was used to improve the generalization ability of the model. In addition, ImageDataGenerator function was used to increase the diversity of training data through data augmentation. To compare model performance, we evaluated pre-trained models such as VGG16, Resnet152, and NASNetMobile. As a result, NASNetMobile showed the highest performance, especially in width prediction, with an R_squared value of 0.9436, and RMSE of 0.5659. In length prediction, the R_squared value was 0.9537, and RMSE of 0.8713. The optimized model adopted the NASNetMobile architecture, the RMSprop optimization tool, the MSE loss functions, and the ELU activation functions. The training time of the model averaged 73 minutes per Epoch, and it took the model an average of 0.29 seconds to process a single lettuce leaf photo. In this study, we developed a CNN-based model to predict the leaf length and leaf width of plants in indoor farms, which is expected to enable rapid and accurate assessment of plant growth status by simply taking images. It is also expected to contribute to increasing the productivity and resource efficiency of farms by taking appropriate agricultural measures such as adjusting nutrient solution in real time.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.39-59
• /
• 2007

The international involvement of a firm has been described as a gradual development process "a process in which the enterprise gradually increases its international involvement in many studies. This process evolves in the interplay between the development of knowledge about foreign markets and operations on one hand and increasing commitment of resources to foreign markets on the other." On the basis of Uppsala internationalization model, many studies strengthen strong theoretical and empirical support. According to the predictions of the classic stages theory, the internationalization process of firms have been recognized and characterized gradual evolution to foreign markets, so called stage theory: indirect & direct export, strategic alliance and foreign direct investment. However, termed "international new ventures" (McDougall, Shane, and Oviatt 1994), "born globals" (Knight 1997; Knight and Cavusgil 1996; Madsen and Servais 1997), "instant internationals" (Preece, Miles, and Baetz 1999), or "global startups" (Oviatt and McDougall 1994) have been used and come into spotlight in internationalization study of technology intensity venture companies. Recent researches focused on venture company have suggested the phenomenons of 'born global' firms as a contradiction to the stages theory. Especially the article by Oviatt and McDougall threw the spotlight on international entrepreneurs, on international new ventures, and on their importance in the globalising world economy. Since venture companies have, by definition. lack of economies of scale, lack of resources (financial and knowledge), and aversion to risk taking, they have a difficulty in expanding their market to abroad and pursue internalization gradually and step by step. However many venture companies have pursued 'Born Global Strategy', which is different from process strategy, because corporate's environment has been rapidly changing to globalization. The existing studies investigate that (1) why the ventures enter into overseas market in those early stage, even in infancy, (2) what make the different international strategy among ventures and the born global strategy is better to the infant ventures. However, as for venture's performance(growth and profitability), the existing results do not correspond each other. They also, don't include marketing strategy (differentiation, low price, market breadth and market pioneer) that is important factors in studying of BGV's performance. In this paper I aim to delineate the appearance of international new ventures and the phenomenons of venture companies' internationalization strategy. In order to verify research problems, I develop a resource-based model and marketing strategies for analyzing the effects of the born global venture firms. In this paper, I suggested 3 research problems. First, do the korean venture companies take some advantages in the aspects of corporate's performances (growth, profitability and overall market performances) when they pursue internationalization from inception? Second, do the korean BGV have firm specific assets (foreign experiences, foreign orientation, organizational absorptive capacity)? Third, What are the marketing strategies of korean BGV and is it different from others? Under these problems, I test then (1) whether the BGV that a firm started its internationalization activity almost from inception, has more intangible resources(foreign experience of corporate members, foreign orientation, technological competences and absorptive capacity) than any other venture firms(Non_BGV) and (2) also whether the BGV's marketing strategies-differentiation, low price, market diversification and preemption strategy are different from Non_BGV. Above all, the main purpose of this research is that results achieved by BGV are indeed better than those obtained by Non_BGV firms with respect to firm's growth rate and efficiency. To do this research, I surveyed venture companies located in Seoul and Deajeon in Korea during November to December, 2005. I gather the data from 200 venture companies and then selected 84 samples, which have been founded during 1999${\sim}$2000. To compare BGV's characteristics with those of Non_BGV, I also had to classify BGV by export intensity over 50% among five or six aged venture firms. Many other researches tried to classify BGV and Non_BGV, but there were various criterion as many as researchers studied on this topic. Some of them use time gap, which is time difference of establishment and it's first internationalization experience and others use export intensity, ration of export sales amount divided by total sales amount. Although using a mixed criterion of prior research in my case, I do think this kinds of criterion is subjective and arbitrary rather than objective, so I do mention my research has some critical limitation in the classification of BGV and Non_BGV. The first purpose of research is the test of difference of performance between BGV and Non_BGV. As a result of t-test, the research show that there are statistically efficient difference not only in the growth rate (sales growth rate compared to competitors and 3 years averaged sales growth rate) but also in general market performance of BGV. But in case of profitability performance, the hypothesis that is BGV is more profit (return on investment(ROI) compared to competitors and 3 years averaged ROI) than Non-BGV was not supported. From these results, this paper concludes that BGV grows rapidly and gets a high market performance (in aspect of market share and customer loyalty) but there is no profitability difference between BGV and Non_BGV. The second result is that BGV have more absorptive capacity especially, knowledge competence, and entrepreneur's international experience than Non_BGV. And this paper also found BGV search for product differentiation, exemption strategy and market diversification strategy while Non_BGV search for low price strategy. These results have never been dealt with other existing studies. This research has some limitations. First limitation is concerned about the definition of BGV, as I mentioned above. Conceptually speaking, BGV is defined as company pursue internationalization from inception, but in empirical study, it's very difficult to classify between BGV and Non_BGV. I tried to classify on the basis of time difference and export intensity, this criterions are so subjective and arbitrary that the results are not robust if the criterion were changed. Second limitation is concerned about sample used in this research. I surveyed venture companies just located in Seoul and Daejeon and also use only 84 samples which more or less provoke sample bias problem and generalization of results. I think the more following studies that focus on ventures located in other region, the better to verify the results of this paper.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.234-240
• /
• 2007

Purpose: In this study we propose a block-iterative method for reconstructing Compton scattered data. This study shows that the well-known expectation maximization (EM) approach along with its accelerated version based on the ordered subsets principle can be applied to the problem of image reconstruction for Compton camera. This study also compares several methods of constructing subsets for optimal performance of our algorithms. Materials and Methods: Three reconstruction algorithms were implemented; simple backprojection (SBP), EM, and ordered subset EM (OSEM). For OSEM, the projection data were grouped into subsets in a predefined order. Three different schemes for choosing nonoverlapping subsets were considered; scatter angle-based subsets, detector position-based subsets, and both scatter angle- and detector position-based subsets. EM and OSEM with 16 subsets were performed with 64 and 4 iterations, respectively. The performance of each algorithm was evaluated in terms of computation time and normalized mean-squared error. Results: Both EM and OSEM clearly outperformed SBP in all aspects of accuracy. The OSEM with 16 subsets and 4 iterations, which is equivalent to the standard EM with 64 iterations, was approximately 14 times faster in computation time than the standard EM. In OSEM, all of the three schemes for choosing subsets yielded similar results in computation time as well as normalized mean-squared error. Conclusion: Our results show that the OSEM algorithm, which have proven useful in emission tomography, can also be applied to the problem of image reconstruction for Compton camera. With properly chosen subset construction methods and moderate numbers of subsets, our OSEM algorithm significantly improves the computational efficiency while keeping the original quality of the standard EM reconstruction. The OSEM algorithm with scatter angle- and detector position-based subsets is most available.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.173-198
• /
• 2020

For a long time, many studies have been conducted on predicting the success of campaigns for customers in academia, and prediction models applying various techniques are still being studied. Recently, as campaign channels have been expanded in various ways due to the rapid revitalization of online, various types of campaigns are being carried out by companies at a level that cannot be compared to the past. However, customers tend to perceive it as spam as the fatigue of campaigns due to duplicate exposure increases. Also, from a corporate standpoint, there is a problem that the effectiveness of the campaign itself is decreasing, such as increasing the cost of investing in the campaign, which leads to the low actual campaign success rate. Accordingly, various studies are ongoing to improve the effectiveness of the campaign in practice. This campaign system has the ultimate purpose to increase the success rate of various campaigns by collecting and analyzing various data related to customers and using them for campaigns. In particular, recent attempts to make various predictions related to the response of campaigns using machine learning have been made. It is very important to select appropriate features due to the various features of campaign data. If all of the input data are used in the process of classifying a large amount of data, it takes a lot of learning time as the classification class expands, so the minimum input data set must be extracted and used from the entire data. In addition, when a trained model is generated by using too many features, prediction accuracy may be degraded due to overfitting or correlation between features. Therefore, in order to improve accuracy, a feature selection technique that removes features close to noise should be applied, and feature selection is a necessary process in order to analyze a high-dimensional data set. Among the greedy algorithms, SFS (Sequential Forward Selection), SBS (Sequential Backward Selection), SFFS (Sequential Floating Forward Selection), etc. are widely used as traditional feature selection techniques. It is also true that if there are many risks and many features, there is a limitation in that the performance for classification prediction is poor and it takes a lot of learning time. Therefore, in this study, we propose an improved feature selection algorithm to enhance the effectiveness of the existing campaign. The purpose of this study is to improve the existing SFFS sequential method in the process of searching for feature subsets that are the basis for improving machine learning model performance using statistical characteristics of the data to be processed in the campaign system. Through this, features that have a lot of influence on performance are first derived, features that have a negative effect are removed, and then the sequential method is applied to increase the efficiency for search performance and to apply an improved algorithm to enable generalized prediction. Through this, it was confirmed that the proposed model showed better search and prediction performance than the traditional greed algorithm. Compared with the original data set, greed algorithm, genetic algorithm (GA), and recursive feature elimination (RFE), the campaign success prediction was higher. In addition, when performing campaign success prediction, the improved feature selection algorithm was found to be helpful in analyzing and interpreting the prediction results by providing the importance of the derived features. This is important features such as age, customer rating, and sales, which were previously known statistically. Unlike the previous campaign planners, features such as the combined product name, average 3-month data consumption rate, and the last 3-month wireless data usage were unexpectedly selected as important features for the campaign response, which they rarely used to select campaign targets. It was confirmed that base attributes can also be very important features depending on the type of campaign. Through this, it is possible to analyze and understand the important characteristics of each campaign type.

• Journal of Preventive Medicine and Public Health
• /
• v.5 no.1
• /
• pp.57-95
• /
• 1972

This study was conducted to assess the effectiveness of service by maternity aids concerning maternal and child health in improving simultaneously infant mortality, contraception and vital registration among expectant mothers in rural Korea, where there is less apportunity for maternal and child health care. It is unrealistic to expect to solve this problem in rural Korea through professional persons considering the situation of medical facilities and the socioeconomic condition of residents. So, we intended to adopt a system of services by maternity aids who were educated formally among indigenous women. After the women were trained in maternal and child health, contraception, and registration for a short period, they were assigned as a maternity aids to each village to help with various activities concerning maternal and child health, for example, registration of pregnant women, home visiting to check for complications, supplying of delivery kits, attendance at delivery, persuasion of contraception, and invitation for registration and so on. Mean-while, four researchers called on the maternity aids to collect materials concerning vital events, maternal child health, contraception and registration, and to give further instruction and supervision as the program proceeded. A. Changes of women's attitude by services of maternity aid. Now, we examined to what extent' such a service system to expectant mothers affected a change in attitude of women residing in the study area as compared to women of the control area. 1) In the birth and death places, there were no changes between last and present infants, in study or control area. 2) In regard to attendants at delivery, there were no changes except for a small percentage of attendance (8%) by maternity aid in study area. But, I expect that more maternity sids could be used as attendants at delivery if they would be trained further and if there was more explanation to the residents about such a service. 3) Considering the rate of utilization of sterilized delivery kit, I am sure that more than 90 percent would be used if the delivery kit were supplied in the proper time. There were significant differences in rates between the study and the control areas. 4) Taking into consideration the utilization rate of the clinic for prenatal care and well baby care, if suck facilities were installed, it would probably be well utilized. 5) In the contraception, the rate of approval was as high as 89 percent in study area as compared to 82 percent in the control area. 6) Considering the rate of pre-and post-partum acceptance on contraception were as much as 70 percent or more, if motivation to use contraception was given to them adequately, the government could reach the goals for family planning as planned. 7) In the vital registration, the rate of birth registration in the study area was some what improved compared to that of the control area, while the rate of death registration was not changed at all. Taking into account the fact that the rate of confirmation of vital events by maternity aids was remarkably high, if the registration system changed to a 'notification' system instead of formal registration ststem, it would be improved significantly compared to present system. B. Effect of the project Thus, with changes in the residents' attitude, was there a reduction in the infant death rate? 1) It is very difficult problem to compare the mortality of infants between last and present infants, because many women don't want to answer accurately about their dead children especially the infants that died within a few days after birth. In this study the data of present death comes from the maternity aides who followed up every pregnancy they had recorded to see what had happened. They seem to have very reliable information on what happened in first few weeks with follow up visitits to check out later changes. From these calculaton, when we compared the rate of infant death between last and present infant, there was remarkable reduction of death rate for present infant compare to that of last children, namely, the former was 30, while the latter 42. The figure is the lowest rate that I have ever heard. As the quality of data we could assess by comparing the causes of death. In the current death rate by communicable disease was much lower compare to the last child especially, tetanus cases and pneumonia. 2) Next, how many respondents used contraception after birth because of frequent contact with the maternity aid. In the registered cases, the respondents showed a tendency to practice contraception at an earlier age and with a small number of children. In a comparison of the rate of contraception between the study and the control area, the rate in the former was significantly higher than that of the latter. What is more, the proportion favoring smaller numbers of children and younger women rose in the study area as compared to the control area. 3) Regarding vital registration, though the rate of registration was gradually improved by efforts of maternity aid, it would be better to change the registration system. 4) In the crude birth rate, the rate in the study area was 22.2 while in the control area was 26.5. Natural increase rate showed 15.4 in the study area, while control area was 19.1. 5) In assessment of the efficiency of the maternity aids judging by the cost-effect viewpoint, the workers in the Medium area seemed to be more efficiency than those of other areas.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.67-74
• /
• 2015

In recent years, frequent itemset mining for considering the importance of each item has been intensively studied as one of important issues in the data mining field. According to strategies utilizing the item importance, itemset mining approaches for discovering itemsets based on the item importance are classified as follows: weighted frequent itemset mining, frequent itemset mining using transactional weights, and utility itemset mining. In this paper, we perform empirical analysis with respect to frequent itemset mining algorithms based on transactional weights. The mining algorithms compute transactional weights by utilizing the weight for each item in large databases. In addition, these algorithms discover weighted frequent itemsets on the basis of the item frequency and weight of each transaction. Consequently, we can see the importance of a certain transaction through the database analysis because the weight for the transaction has higher value if it contains many items with high values. We not only analyze the advantages and disadvantages but also compare the performance of the most famous algorithms in the frequent itemset mining field based on the transactional weights. As a representative of the frequent itemset mining using transactional weights, WIS introduces the concept and strategies of transactional weights. In addition, there are various other state-of-the-art algorithms, WIT-FWIs, WIT-FWIs-MODIFY, and WIT-FWIs-DIFF, for extracting itemsets with the weight information. To efficiently conduct processes for mining weighted frequent itemsets, three algorithms use the special Lattice-like data structure, called WIT-tree. The algorithms do not need to an additional database scanning operation after the construction of WIT-tree is finished since each node of WIT-tree has item information such as item and transaction IDs. In particular, the traditional algorithms conduct a number of database scanning operations to mine weighted itemsets, whereas the algorithms based on WIT-tree solve the overhead problem that can occur in the mining processes by reading databases only one time. Additionally, the algorithms use the technique for generating each new itemset of length N+1 on the basis of two different itemsets of length N. To discover new weighted itemsets, WIT-FWIs performs the itemset combination processes by using the information of transactions that contain all the itemsets. WIT-FWIs-MODIFY has a unique feature decreasing operations for calculating the frequency of the new itemset. WIT-FWIs-DIFF utilizes a technique using the difference of two itemsets. To compare and analyze the performance of the algorithms in various environments, we use real datasets of two types (i.e., dense and sparse) in terms of the runtime and maximum memory usage. Moreover, a scalability test is conducted to evaluate the stability for each algorithm when the size of a database is changed. As a result, WIT-FWIs and WIT-FWIs-MODIFY show the best performance in the dense dataset, and in sparse dataset, WIT-FWI-DIFF has mining efficiency better than the other algorithms. Compared to the algorithms using WIT-tree, WIS based on the Apriori technique has the worst efficiency because it requires a large number of computations more than the others on average.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.68-79
• /
• 2009

The interplay between hedonic and utilitarian attributes has assumed special significance in recent years; it has been proposed that consumption offerings should be viewed as experiences that stimulate both cognitions and feelings rather than as mere products or services. This research builds on previous work on hedonic versus utilitarian benefits, regulatory focus theory, customer satisfaction to address two question: (1) Is the shopping goal at the point of purchase different from the shopping value? and (2) Is the customer loyalty after the use different from the shopping value and shopping goal? We surveyed 345 peoples those who have bought the electronic-goods within 6 months. This research dealt with the shopping value which is consisted of 2 types, hedonic and utilitarian. Those who pursue the hedonic shopping value may prefer the pleasure of purchasing experience to the product itself. They tend to prefer atmosphere, arousal of the shopping experience. Consistent with previous research, we use the term "hedonic" to refer to their aesthetic, experiential and enjoyment-related value. On the contrary, Those who pursue the utilitarian shopping value may prefer the reasonable buying. It may be more functional. Consistent with previous research, we use the term "utilitarian" to refer to the functional, instrumental, and practical value of consumption offerings. Holbrook(1999) notes that consumer value is an experience that results from the consumption of such benefits. In the context of cell phones for example, the phone's battery life and sound volume are utilitarian benefits, whereas aesthetic appeal from its shape and color are hedonic benefits. Likewise, in the case of a car, fuel economics and safety are utilitarian benefits whereas the sunroof and the luxurious interior are hedonic benefits. The shopping goals are consisted of the promotion focus goal and the prevention focus goal, based on the self-regulatory focus theory. The promotion focus is characterized into focusing ideal self because they are oriented to wishes and vision. The promotion focused individuals are tend to be more risk taking. They are more sensitive to hope and achievement. On the contrary, the prevention focused individuals are characterized into focusing the responsibilities because they are oriented to safety. The prevention focused individuals are tend to be more risk avoiding. We wanted to test the relation among the shopping value, shopping goal and customer loyalty. Customers show the positive or negative feelings comparing with the expectation level which customers have at the point of the purchase. If the result were bigger than the expectation, customers may feel positive feeling such as delight or satisfaction and they would want to share their feelings with other people. And they want to buy those products again in the future time. There is converging evidence that the types of goals consumers expect to be fulfilled by the utilitarian dimension of a product are different from those they seek from the hedonic dimension (Chernev 2004). Specifically, whereas consumers expect the fulfillment of product prevention goals on the utilitarian dimension, they expect the fulfillment of promotion goals on the hedonic dimension (Chernev 2004; Chitturi, Raghunathan, and Majahan 2007; Higgins 1997, 2001) According to the regulatory focus theory, prevention goals are those that ought to be met. Fulfillment of prevention goals in the context of product consumption eliminates or significantly reduces the probability of a painful experience, thus making consumers experience emotions that result from fulfillment of prevention goals such as confidence and securities. On the contrary, fulfillment of promotion goals are those that a person aspires to meet, such as "looking cool" or "being sophisticated." Fulfillment of promotion goals in the context of product consumption significantly increases the probability of a pleasurable experience, thus enabling consumers to experience emotions that result from the fulfillment of promotion goals. The proposed conceptual framework captures that the relationships among hedonic versus utilitarian shopping values and promotion versus prevention shopping goals respectively. An analysis of the consequence of the fulfillment and frustration of utilitarian and hedonic value is theoretically worthwhile. It is also substantively relevant because it helps predict post-consumption behavior such as the promotion versus prevention shopping goals orientation. Because our primary goal is to understand how the post consumption feelings influence the variable customer loyalty: word of mouth (Jacoby and Chestnut 1978). This research result is that the utilitarian shopping value gives the positive influence to both of the promotion and prevention goal. However the influence to the prevention goal is stronger. On the contrary, hedonic shopping value gives influence to the promotion focus goal only. Additionally, both of the promotion and prevention goal show the positive relation with customer loyalty. However, the positive relation with promotion goal and customer loyalty is much stronger. The promotion focus goal gives the influence to the customer loyalty. On the contrary, the prevention focus goal relates at the low level of relation with customer loyalty than that of the promotion goal. It could be explained that it is apt to get framed the compliment of people into 'gain-non gain' situation. As the result, for those who have the promotion focus are motivated to deliver their own feeling to other people eagerly. Conversely the prevention focused individual are more sensitive to the 'loss-non loss' situation. The research result is consistent with pre-existent researches. There is a conceptual parallel between necessities-needs-utilitarian benefits and luxuries-wants-hedonic benefits (Chernev 2004; Chitturi, Raghunathan and Majaha 2007; Higginns 1997; Kivetz and Simonson 2002b). In addition, Maslow's hierarchy of needs and the precedence principle contends luxuries-wants-hedonic benefits higher than necessities-needs-utilitarian benefits. Chitturi, Raghunathan and Majaha (2007) show that consumers are focused more on the utilitarian benefits than on the hedonic benefits of a product until their minimum expectation of fulfilling prevention goals are met. Furthermore, a utilitarian benefit is a promise of a certain level of functionality by the manufacturer or the retailer. When the promise is not fulfilled, customers blame the retailer and/or the manufacturer. When negative feelings are attributable to an entity, customers feel angry. However in the case of hedonic benefit, the customer, not the manufacturer, determines at the time of purchase whether the product is stylish and attractive. Under such circumstances, customers are more likely to blame themselves than the manufacturer if their friends do not find the product stylish and attractive. Therefore, not meeting minimum utilitarian expectations of functionality generates a much more intense negative feelings, such as anger than a less intense feeling such as disappointment or dissatisfactions. The additional multi group analysis of this research shows the same result. Those who are unsatisfactory customers who have the prevention focused goal shows higher relation with WOM, comparing with satisfactory customers. The research findings in this article could have significant implication for the personal selling fields to increase the effectiveness and the efficiency of the sales such that they can develop the sales presentation strategy for the customers. For those who are the hedonic customers may be apt to show more interest to the promotion goal. Therefore it may work to strengthen the design, style or new technology of the products to the hedonic customers. On the contrary for the utilitarian customers, it may work to strengthen the price competitiveness. On the basis of the result from our studies, we demonstrated a correspondence among hedonic versus utilitarian and promotion versus prevention goal, WOM. Similarly, we also found evidence of the moderator effects of satisfaction after use, between the prevention goal and WOM. Even though the prevention goal has the low level of relation to WOM, those who are not satisfied show higher relation to WOM. The relation between the prevention goal and WOM is significantly different according to the satisfaction versus unsatisfaction. In addition, improving the promotion emotions of cheerfulness and excitement and the prevention emotion of confidence and security will further improve customer loyalty. A related potential further research could be to examine whether hedonic versus utilitarian, promotion versus prevention goals improve customer loyalty for services as well. Under the budget and time constraints, designers and managers are often compelling to choose among various attributes. If there is no budget or time constraints, perhaps the best solution is to maximize both hedonic and utilitarian dimension of benefits. However, they have to make trad-off process between various attributes. For the designers and managers have to keep in mind that without hedonic benefit satisfaction of the product it may hard to lead the customers to the customer loyalty.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.68-92
• /
• 1995

Recentry the structure of the retail trade have been chanaed with its environmantal changes. Some studies may be necessary on the changing process of environment and fundamental structure analyses of the retail trade. This study analyzes the location of retail trades, inhabitants' behavior in retail tredes and their desirable utilization scheme of them in Kwangju-si. Some study methods, contents and coming-out results are as follows: 1. Retail trades can be classified into independent stores, chain-stores (supermarket, voluntary chain and frenchiise system and convenience store), department stores, cooperative associations, traditional, markets mail-order marketing, automatic vending and others by service levels, selling-items, prices, managements, methods of retailing and store or nonstore type. 2. In Kwangju, the environment of retail trades is related to the consumers of population structure: chanes in consumers pattern, trends toward agings and nuclear family, increase of leisur: time and female advances to society. Rapid structural shift in retail trade has also been occurred due to these social changes. Traditionl and premodern markets until 1970s altere to supermarkets or department stores in 1980s, and various types, large enterprises and foreign capitals came into being in 1990s. 3. The locational characteristics of retail trades are resulted from the spatial analysis of the total population distribution, and from the calculation of segregation index in the light of potential demand. The densely-populated areas occurs in newly-built apartment housing complex which is distributed with a ring-shaped pattern around the old urban core. The numbers and rates of the aged over sixty in Kwangsan-gu and the circumference area of Mt.Moodeung, are larger and higher where rural elements are remarkable. A relation between population distribution and retail trade are analysed by the index of population per shop. The index of the population number per shop is lower in urban center, as a whole, being more convenient for consumers. In newly-formed apartment complex areas, on the other, the index more than 1,000 per shop, meeting not the demands for consumers. Because both the younger and the aged are numerous in these areas, the retail trade pattern pertinent to both are needed. Urban fringes including Kwangsan-gu and the vicinity of Mt.Moodeung have some problems owing to the most of population number per shop (more than 1, 500) and the most extensive as well. 4. The regional characteristic of retail trade is analyzed through the location quotient of shops by locational patterns and centerality index. Chungkum-dong is the highest-order central place in CBD. It is the core of retail trades, which has higher-ordered specialty store including three big department stores, supermarkets and large stores. Taegum-dong, Chungsu-dong, Taeui-dong, and Numun-dong that are neiahbored to Chungkum-dong fall on the second group. They have a central commercial section where large chain stores, specialty shopping streets, narrow-line retailing shops (furniture, amusement service, and gallary), supermarkets and daily markets are located. The third group is formed on the axis of state roads linking to Naju-kun, Changseong-kun, Tamyang-kun, Hwasun-kun and forme-Songjeong-eup. It is related to newly, rising apartment housing complex along a trunk road, and characterized by markets and specialty stores. The fourth group has neibourhood-shopping centers including older residential area and Songjeong-eup area with independent stores and supermarkets as main retailing functions. The last group contains inner residential area and outer part of a city including Songjeong-eup. Outer part of miscellaneous shops being occasionally found is rural rather than urban (Fig. 7). 5. The residents' behaviors using retail trade are analyzed by factors of goods and facilities. Department stores are very high level in preference for higher-order shopping-goods such as clothes for full dress in view of both diversity and quality of goods(28.9%). But they have severe traffic congestions, and high competitions for market ranges caused by their sma . 64.0% of respondents make combined purpose trips together with banking and shopping. 6. For more efficiency of retail-trading, it is necessary to induce spatial distribution policy with regard to opportunity frequency of goods selection by central place, frontier regions and age groups. Also we must consider to analyze competition among different types of retail trade and analyze the consumption behaviors of working females and younger-aged groups, in aspects of time and space. Service improvement and the rationalization of management should be accomplished in such as cooperative location (situation) must be under consideration in relations to other functions such as finance, leisure & sports, and culture centers. Various service systems such as installment, credit card and peremium ticket, new used by enterprises, must also be carried service improvement. The rationalization and professionalization in for the commercial goods are bsically requested.