• Title/Summary/Keyword: Time-Delay-Control

Search Result 2,130, Processing Time 0.033 seconds

In-Vivo Heat Transfer Measurement using Proton Resonance Frequency Method of Magnetic Resonance Imaging (자기 공명영상 시스템의 수소원자 공명 주파수법을 이용한 생체 내 열 전달 관찰)

  • 조지연;조종운;이현용;신운재;은충기;문치웅
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.40 no.3
    • /
    • pp.172-180
    • /
    • 2003
  • The purpose of this study is to observe the heat transfer process in in-vivo human muscle based on Proton Resonance Frequency(PRF) method in Magnetic Resonance Imaging(MRI). MRI was obtained to measure the temperature variation according to the heat transfer in phantom and in-vivo human calf muscle. A phantom(2% agarose gel) was used in this experiment. MR temperature measurement was compared with the direct temperature measurement using a T-type thermocouple. After heating agarose gel to more than 5$0^{\circ}C$ in boiling hot water, raw data were acquired every 3 minutes during one hour cooling period for a phantom case. For human study heat was forced to deliver into volunteer's calf muscle using hot pack. Reference data were once acquired before a hot pack emits heat and raw data were acquired every 2 minutes during 30minutes. Acquired raw data were reconstructed to phase-difference images with reference image to observe the temperature change. Phase-difference of the phantom was linearly proportional to the temperature change in the range of 34.2$^{\circ}C$ and 50.2$^{\circ}C$. Temperature resolution was 0.0457 radian /$^{\circ}C$(0.0038 ppm/$^{\circ}C$) in phantom case. In vivo-case, mean phase-difference in near region from the hot pack is smaller than that in far region. Different temperature distribution was observed in proportion to a distance from heat source.

Exogenous Sugars Involvement in Senescence and Ethylene Production of Tree Peony 'Luoyang Hong' Cut Flowers

  • Zhang, Chao;Liu, Miao;Fu, Jianxin;Wang, Yanjie;Li, Dong
    • Horticultural Science & Technology
    • /
    • v.30 no.6
    • /
    • pp.718-724
    • /
    • 2012
  • Sugars play important roles in petal senescence of cut flowers. In the Expt. 1 of this study, the effects of different concentrations of glucose (60, 90, and $120g{\cdot}L^{-1}$) and sucrose (30, 60, and $90g{\cdot}L^{-1}$) application on the vase life, rate of flower diameter increase, rate of flower weight increase and ethylene production of cut tree peony (Paeonia suffruticosa 'Luoyang Hong') were evaluated. At the earlier stage, treatments of different concentrations of glucose and sucrose all retarded the process of flower opening and inhibited the increase of flower diameter and weight, while senescence of flowers fed with different concentrations of glucose was delayed at later stage. Flowers treated with $90g{\cdot}L^{-1}$ glucose displayed the longest vase life, which showed significant difference (P < 0.05) from those of flowers with the control and sucrose treatments. All treatments with glucose or sucrose not only retarded the decrease of flower diameter and weight, but also suppressed the ethylene production at the earlier stage and delayed the peak of ethylene evolution. In order to study the effect of exogenous sugar on the postharvest response of cut tree peony to ethylene, Expt. 2 was conducted. Cut flowers were treated with $90g{\cdot}L^{-1}$ glucose for 4 hours before (GE) or after (EG) exposed to $10{\mu}L{\cdot}L^{-1}$ ethylene for 4 hours. Generally, the opening process of flowers with GE and EG treatments was similar to that of the control, however GE treatment delayed flower senescence. Both GE and EG treatments improved flower diameter and weight, and GE treatment delayed the time of flower weight decrease. Besides, GE delayed climacteric ethylene evolution for 8 hours. All above suggest that exogenous sugars delay tree peony 'Luoyang Hong' cut flower senescence and extend flower vase life through their roles in the decrease of water loss and the suppression of sensitivity to ethylene and ethylene production.

Design and Performance Evaluation of Resequencing Algorithm for TCP Performance Enhancement in FHMIPV6 Handover (FHMIPv6 핸드오버에서 TCP 성능 향상을 위한 재정렬 알고리즘 설계 및 성능 분석)

  • Hwang An-Kyu;Lee Jae-Yong;Kim Byung-Chul;Lee Jae-Hoon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.3 s.345
    • /
    • pp.118-125
    • /
    • 2006
  • Mobile nodes in FHMIPv6 has both advantages of HMIPv6 protocol which reduces signaling delay time and resource consumption during a handover and fast handover algorithm which reduces packet loss. Fast handover algorithm can reduce packet loss by 'tunneling' method ; that transmits a packet from old access router to new access router in case of handover. However, the fast handover algorithm can cause a reordering problem in a receiver between packets tunneled from the previous access router and packets transmitted directly to the new access router, which could degrade the TCP performance due to congestion control. In this paper, we propose two algorithms to solve the reordering problem in fast handover. The first one uses a holding timer for tunneling, the other adds a new algorithm to routers that adopt snoop protocol. We compare the performance of the proposed reseuquencing algorithms with that of the existing FHMIPv6 protocol by simulation. The simulation results show that the proposed algorithms solve the reordering problems and enhance TCP performance by preventing TCP sender entering congestion control.

A WATM MAC Protocol for the Efficient Transmission of Voice Traffic in the Multimedia Environment (멀티미디어 환경에서 효율적인 음성 전송을 위한 WATM MAC 프로토콜)

  • 민구봉;최덕규;김종권
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.1A
    • /
    • pp.96-103
    • /
    • 2000
  • The voice traffic is one of the most important real-time objects in WATM(Wireless Asynchronous Transfer Mode) networks. In this paper, we propose a new MAC(Medium Access'Control) protocol for the efficienttransmission of voice traffic over WATM networks in the multimedia environment and compare the performanceto existing similar protocols. The new protocol separates the reservation slot period for voice and that for data toguarantee some level of QoS(Quality of Service) in voice traffic. This is denoted by a slot assignment functiondepending on the frame size. According to the characteristics of voice traffic which is repeatedly in silent states,the protocol allocates voice reservation request slots dynamically with respect to the number of silent(off state)voice sources and also sends the first block of talkspurt restarted after silent period with a reservation requestslot to reduce the access delay.The simulation results show that the proposed protocol has better performance than Slotted Aloha in bandwidthefficiency, and can serve a certain level of QoS by the given slot assignment function even when the number ofvoice terminals varies dynamically. This means we can observe that the new MAC protocol is much better thanthe NC-PRMA(None Collision-Packet Reservation Multiple Access) protocol.

  • PDF

Quality Characteristics of Bakery Products with Whole Green Wheat Powder (녹색 밀을 첨가한 베이커리 제품의 품질 특성)

  • Kim, Jin-Young;Lee, Ki-Teak;Lee, Jeung-Hee
    • Korean journal of food and cookery science
    • /
    • v.29 no.2
    • /
    • pp.137-146
    • /
    • 2013
  • Premature-green wheat is typically obtained by early harvest when culms of wheat still appear green in color, and the wheat and its food products have been considered as wellbeing foods. The pasting properties of prematured whole green wheat powder (WGWP), were analyzed with a rapid viscosity analyzer (RVA), and compared with commercial flours. The RVA values of lower peak viscosity and time, holding strength, final viscosity, as well as breakdown and setback viscosity showed that the WGWP could retard a gelatination of starch and also delay retrogradation in bakery products. WGWP with different levels of 10, 20, 30 or 50% was added into flours for preparing bakery product (bread, muffin and cookie), and their quality properties were evaluated. The addition of WGWP lead to a reduction in loaf volume of bread and muffin, and bakery products containing different levels of WGWP showed the changed internal surface structure (e.g. pore size) observed with a scanning electron microscope when compared with the control (0% WGWP). The hardness, gumminess, chewiness of bread and muffins were increased, and cohesiveness was decreased as the WGWP content increased, but the hardness of cookies was decreased. The bakery products added WGWP showed darker and more greenish and yellowish color than control (p<0.05). The sensory evaluation showed that bakeries with WGWP were scored to have more greenish taste and green color (p<0.05), and muffins and cookies with WGWP were evaluated to have more nutty and less oily taste (p<0.05).

Measurement System of Dynamic Liquid Motion using a Laser Doppler Vibrometer and Galvanometer Scanner (액체거동의 비접촉 다점측정을 위한 레이저진동계와 갈바노미터스캐너 계측시스템)

  • Kim, Junhee;Shin, Yoon-Soo;Min, Kyung-Won
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.31 no.5
    • /
    • pp.227-234
    • /
    • 2018
  • Researches regarding measurement and control of the dynamic behavior of liquid such as sloshing have been actively on undertaken in various engineering fields. Liquid vibration is being measured in the study of tuned liquid dampers(TLDs), which attenuates wind motion of buildings even in building structures. To overcome the limitations of existing wave height measurement sensors, a method of measuring liquid vibration in a TLD using a laser Doppler vibrometer(LDV) and galvanometer scanner is proposed in this paper: the principle of measuring speed and displacement is discussed; a system of multi-point measurement with a single point of LDV according to the operating principles of the galvanometer scanner is established. 4-point liquid vibration on the TLD is measured, and the time domain data of each point is compared with the conventional video sensing data. It was confirmed that the waveform is transformed into the traveling wave and the standing wave. In addition, the data with measurement delay are cross-correlated to perform singular value decomposition. The natural frequencies and mode shapes are compared using theoretical and video sensing results.

Supporting RSVP for IP Multicast over ATM Networks with MARS Architecture based on MCS (MCS 기반 MARS를 사용하는 ATM 망에서의 IP 멀티캐스트를 위한 RSVP 지원 방안)

  • Choe, Jeong-Hyeon;Lee, Mi-Jeong
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.26 no.7
    • /
    • pp.813-826
    • /
    • 1999
  • 실시간 멀티미디어 응용의 등장으로 멀티캐스트와 QoS(Quality of Service) 지원이 필수적인 망 서비스로 부각되고 있다. 이에, ATM 기반의 인터넷에서 IP 멀티캐스트의 효율적인 처리를 위하여 MARS(Multicast Address Resolution Server)가 제안되었고, 기존의 최선 서비스 기반의 인터넷에서 QoS(Quality of Service)를 지원하기 위하여 RSVP(Resource Reservation Protocol)가 제안되었다. 본 논문에서는 ATM 망에서 QoS가 지원되는 IP 멀티캐스트 서비스를 제공하기 위하여 MARS 구조에서 RSVP를 지원하는 두 가지 방안을 제안하고, 시뮬레이션을 통하여 그 성능을 분석하였다. 제안하는 두 가지 방법은 각각 'RSVP 전 홉 노드 방식'과 'MARS 서버 방식'이라 명명하였다. RSVP 전 홉 노드 방식은 송신원으로부터 ATM 망으로 진입하는 노드와 수신원을 향하여 ATM 망을 진출하는 노드 간에 각각 일대일 양방향 VC를 설정하여 멀티캐스트 그룹에 속하는 수신원들이 보내는 자원 예약 메시지를 ATM 망에서 전송하는 방안이다. MARS 서버 방식은 ATM 망을 진출하는 노드와 MARS 서버간에 MARS 제어 메시지 교환을 위해 존재하는 ATM VC를 사용하여 RSVP의 자원 예약 메시지를 전송하고, MARS 서버가 RSVP 자원 예약 메시지를 처리하도록 그 기능을 확장함으로써 ATM 망에서 필요로 하는 제어 VC 수를 절약할 수 있는 방안이다. 시뮬레이션을 통하여, MARS 서버 방식은 ATM 제어 VC의 수를 절약할 수 있을 뿐 아니라 경우에 따라 RSVP 자원 예약 메시지 전달 지연을 줄일 수도 있음을 볼 수 있었다. 그러나, MARS 클러스터 내에 동시에 존재하는 RSVP 흐름이 많을 때에는 MARS 서버 방식의 경우 MARS 서버에서의 병목 현상으로 인해 성능이 저하될 수 있다.Abstract Emerging real time multimedia applications require multicast service with a QoS(Quality of Service) support. An overlay service architecture MARS(Multicast Address Resolution Server) is proposed to support IP multicast over an ATM network, and a resource reservation protocol RSVP is proposed to provide QoS support in the Internet which is originally based upon best effort service only. In this paper, we propose two schemes to support IP multicast service with QoS support over ATM networks: 'RSVP Previous Hop Node(RPHN) scheme' and 'MARS server based scheme'. In RPHN scheme, the RSVP reservation messages are transported via one-to-one ATM control VC from the egress nodes to the ingress nodes of the the multicast flow set up between each pair of nodes. The RSVP message processing occurs at the ingress nodes of the multicast flow. Whereas, in the MARS server based scheme, the RSVP reservation messages are transported via the MARS control VCs between the egress nodes and the MARS server. The RSVP message processing burden is imposed at MARS server in this scheme. For MARS server based scheme, no additional ATM VC is required for RSVP reservation message transmission, while the processing burden at the MARS server is high. Simulation results show that the MARS server based scheme, may accomplish RSVP reservation message delivery with smaller delay as well as saving of the number of ATM VCs. When the number of simultaneous RSVP flows in the MARS cluster is large, however, MARS based scheme may suffer performance degradation since MARS server becomes a performance bottleneck.

Photoperiod manipulation in controlling growth and flowering of Chrysanthemum (일장조절이 국화의 생장과 개화에 미치는 효과)

  • Suh, Jeung Keun;Kim, Ji Hee;Lee, Ae Kyung
    • FLOWER RESEARCH JOURNAL
    • /
    • v.18 no.3
    • /
    • pp.157-164
    • /
    • 2010
  • In Chrysanthemum ${\times}$ morifolium, 30 days of continuous short days (SD) are required for flowering. The effects of alternating short day (SD) - long day (LD) - SD treatments was tested in 5 daisy-like single cultivars, 'Limelight', 'Sunlight', 'Candle Light', 'Firebrand', and 'Twilight', Thee other decorative type cultivars, 'Spirit', 'SunburstSpriit', 'Mandalay', and 'Illini Harvest' was also included. Short day treatment was given for 30 days (control: 30SD) and 5 or 10 LD were interposed following 5 or 10 SD. Different responses were noticed when data from all cultivars were combined, showing that flowering was delayed and the number of ray florets were increased by 5 SD-10 LD-25 SD. The number of ray florets, 40 florets in 'Firebrand' and 60.8 florets in 'Candlelight' was increased significantly by 5 SD-10 LD-25 SD as compared to the control. There were no adverse effects by SD-LD-SD treatment, except for the delay in flowering time from 6 to 7 days. The number of ray florets in 'Illini Harvest' and 'Limelight' were, however, not increased by any SD-LD-SD treatments. Cultivar dependent responses should further be investigated in other newly available cultivars, and this information could be used to breed new cultivars.

Low Power TLB Supporting Multiple Page Sizes without Operation System (운영체제 도움 없이 멀티 페이지를 지원하는 저전력 TLB 구조)

  • Jung, Bo-Sung;Lee, Jung-Hoon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.18 no.12
    • /
    • pp.1-9
    • /
    • 2013
  • Even though the multiple pages TLB are effective in improving the performance, a conventional method with OS support cannot utilize multiple page sizes in user application. Thus, we propose a new multiple-TLB structure supporting multiple page sizes for high performance and low power consumption without any operating system support. The proposed TLB is organised as two parts of a S-TLB(Small TLB) with a small page size and a L-TLB(Large TLB) with a large page size. Both are designed as fully associative bank structures. The S-TLB stores small pages are evicted from the L-TLB, and the L-TLB stores large pages including a small page generated by the CPU. Each one bank module of S-TLB and L-TLB can be selectively accessed base on particular one and two bits of the virtual address generated from CPU, respectively. Energy savings are achieved by reducing the number of entries accessed at a time. Also, this paper proposed the simple 1-bit LRU policy to improve the performance. The proposed LRU policy can present recently referenced block by using an additional one bit of each entry on TLBs. This method can simply select a least recently used page from the L-TLB. According to the simulation results, the proposed TLB can reduce Energy * Delay by about 76%, 57%, and 6% compared with a fully associative TLB, a ARM TLB, and a Dual TLB, respectively.

Characteristics of Strength Development of Ultra-High Performance Concrete according to Curing Condition (초고성능 콘크리트의 양생 조건에 따른 강도 발현 특성)

  • Park, Jong-Sup;Kim, Young-Jin;Cho, Jeong-Rae;Jeon, Se-Jin
    • Journal of the Korea Concrete Institute
    • /
    • v.25 no.3
    • /
    • pp.295-304
    • /
    • 2013
  • Ultra-High Performance Concrete (UHPC) has recently been one of the most active research fields in Korea as well as in foreign countries, because it can contribute to a longer life and economic efficiency of structures. Although precast-type UHPC fabricated in a factory is preferable in terms of quality control and reduction of construction period, there exist, even in the precast structure, some parts that need to be cast in-place such as the joints between precast segments. In the cast-in-place UHPC, however, it is probable that an optimum curing condition can hardly be realized in contrast to the factory production. In this study, therefore, the trend of compressive strength development of UHPC was experimentally investigated by assuming various inferior curing conditions that may be anticipated at a construction site. Concrete specimens were fabricated and cured under different conditions with the variables such as curing temperature, delay time before the initiation of curing, duration of curing time and moisture condition. The strengths were compared with those of the specimens cured by standard high temperature steam. Through the analysis of the test results, some minimum requirements for curing have been proposed that are required when the UHPC is cast in-place. It is expected, through this study, that practical use of UHPC in construction sites can be increased.