• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2013

Purpose: Adsorption properties of lysozyme and albumin according to physiochemical properties of commercial contact lens classified with the FDA categories and a contact lens fabricated in the laboratory were investigated. Methods: The contact lens were prepared using HEMA(2-hydroxyethyl methacrylate) and TRIM(3-(trimethoxysilyl) propyl methacrylate) in a cast mold. Artificial tears containing lysozyme and albumin were prepared. We measured the amounts of protein adsorbed on the each lenses with varying adsorbed time (48 hour) and the pH range (6, 6.8, 7.4, 8.2, 9) of artificial tear. Amount of the proteins absorbed on the contact lenses were measured by using HPLC. Results: Time to reach the equilibrium of protein adsorption for silicone hydrogel lens was taken longer than hydrogel lens. The amount of adsorbed both lysozyme and albumin at equilibrium were greater for the hydrogel lens than the silicone hydrogel lens, and larger for the ionic lens than the non-ionic lens. Lysozyme was more adsorbed on the higher water content of contact lens, whereas albumin was more adsorbed on the lower water content of contact lens. Only lysozyme was adsorbed on the Group IV hydrogel lens of ionic higher water content. The adsorption of protein on contact lens increased with pH of artificial tears as close to the isoelectric point of each protein. Conclusions: The adsorption amount of lysozyme is more affected by the ionic strength of the contact lens surface than the water content of contact lens. Albumin adsorption is more affected by water content than the ionic strength of the contact lens surface. For the adsorption of proteins on the silicone hydrogel lens, the pore size, determined both by the number of Si atoms and the chemical structure of the silicone-containing monomers, as well as the polarity of contact lens should be also considered.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.97-121
• /
• 2013

With the growing importance of knowledge for sustainable competitive advantages and innovation in a volatile environment, many researches on knowledge sharing have been conducted. However, previous researches have mostly relied on the questionnaire survey which has inherent perceptive errors of respondents. The current research has drawn the relationship among primary participant behaviors towards the participation level in knowledge sharing, basically from online user behaviors on Wikipedia, a representative community for online knowledge collaboration. Without users' participation in knowledge sharing, knowledge collaboration for creating knowledge cannot be successful. By the way, the editing patterns of Wikipedia users are diverse, resulting in different revisiting periods for the same number of edits, and thus varying results of shared knowledge. Therefore, we illuminated the participation level of knowledge sharing from two different angles of number of edits and revisiting period. The behavioral dimensions affecting the level of participation in knowledge sharing includes the article talk for public discussion and user talk for private messaging, and community registration, which are observable on Wiki platform. Public discussion is being progressed on article talk pages arranged for exchanging ideas about each article topic. An article talk page is often divided into several sections which mainly address specific type of issues raised during the article development procedure. From the diverse opinions about the relatively trivial things such as what text, link, or images should be added or removed and how they should be restructured to the profound professional insights are shared, negotiated, and improved over the course of discussion. Wikipedia also provides personal user talk pages as a private messaging tool. On these pages, diverse personal messages such as casual greetings, stories about activities on Wikipedia, and ordinary affairs of life are exchanged. If anyone wants to communicate with another person, he or she visits the person's user talk page and leaves a message. Wikipedia articles are assessed according to seven quality grades, of which the featured article level is the highest. The dataset includes participants' behavioral data related with 2,978 articles, which have reached the featured article level, with editing histories of articles, their article talk histories, and user talk histories extracted from user talk pages for each article. The time period for analysis is from the initiation of articles until their promotion to the featured article level. The number of edits represents the total number of participation in the editing of an article, and the revisiting period is the time difference between the first and last edits. At first, the participation levels of each user category classified according to behavioral dimensions have been analyzed and compared. And then, robust regressions have been conducted on the relationships among independent variables reflecting the degree of behavioral characteristics and the dependent variable representing the participation level. Especially, through adopting a motivational theory adequate for online environment in setting up research hypotheses, this work suggests a theoretical framework for the participation level of online knowledge sharing. Consequently, this work reached the following practical behavioral results besides some theoretical implications. First, both public discussion and private messaging positively affect the participation level in knowledge sharing. Second, public discussion exerts greater influence than private messaging on the participation level. Third, a synergy effect of public discussion and private messaging on the number of edits was found, whereas a pretty weak negative interaction effect of them on the revisiting period was observed. Fourth, community registration has a significant impact on the revisiting period, whereas being insignificant on the number of edits. Fifth, when it comes to the relation generated from private messaging, the frequency or depth of relation is shown to be more critical than the scope of relation for the participation level.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.331-338
• /
• 2018

The purpose of this study was to determine the optimum sterilization conditions for the production of retorted steamed egg using response surface methodology. Sterilization processes for eighteen conditions using varying sterilization temperature ($X_1$), time ($X_2$), and method ($X_3$) as the independent variables were carried out through a $3^2{\times}2$ experimental factorial design. Quality evaluations after sterilization included measurements of $F_0$ value ($Y_1$), peak stress ($Y_2$), pH ($Y_3$), color value ($Y_{4-6}$), and organoleptic test [preference for appearance ($Y_7$), overall acceptability ($Y_8$), and preference for texture ($Y_9$) and egg taste ($Y_{10}$)]. Dependent variables ($Y_{1-10}$) of eighteen conditions were more affected by temperature and time than by the sterilization method. Eight factors were selected among the dependent variables as significant factors related to the quality of the steamed egg. Finally, by establishing an optimum range of each dependent variable and contour analysis, the optimum sterilization conditions for the production of steamed egg were determined to be $120^{\circ}C$ for 25 min using a 2-step sterilization process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.310-319
• /
• 2018

The southern type grasses announced for the test were the Bermudagrass cultivars (Giant, Cheyenne, Mohawk, Panchero Frio, Common and Tifton 85) and the Bahiagrass cultivars (TifQuik, Tifton 9), and the changes in the productivity and nutrient content were surveyed in Jeju area (450m altitude). The different cultivars were sowed by broadcasting or drill seeding method, and Tifton 85 was transplanted from sprigs. The fresh and dry matter yield showed varying significant differences for different cultivars (p<0.05). The fresh yields of Tifton 85, TifQuik and Tifton 9 were excellent, compared to the other cultivars, and for the dry matter yield, Tifton 85 and Tifton 9 were excellent when compared to the other cultivars. Crude protein content showed significant differences among different cultivars (p<0.05). Cheyenne, Mohawk, Panchero Frio, and Common showed differences in the crude protein content by sowing method and harvest time (p<0.05). The different cultivars showed differences in the crude fiber content (p<0.05), and Tifton 9 registered significantly high content and Mohawk and Tifton 85 showed significant crude fiber content by harvest time (p<0.05). According to these results, the southern type grass cultivars showed big differences in the regenerative capacity against damage from frost, productivity, and nutrient content, so they need to be chosen according to the purposes, and to increase their usage, their evaluation needs to be conducted at various altitudes.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.52-58
• /
• 2023

With the increasing awareness of the importance of carbon neutrality in response to global climate change, the utilization of hydrogen as a carbon-free fuel source is also growing. Hydrogen is commonly used in fuel cells (FC), but it can also be utilized in internal combustion engines (ICE) that are based on combustion. Particularly, ICEs that already have established infrastructure for production and supply can greatly contribute to the expansion of hydrogen energy utilization when it becomes difficult to rely solely on fuel cells or expand their infrastructure. However, a disadvantage of utilizing hydrogen through combustion is the potential generation of nitrogen oxides (NOx), which are harmful emissions formed when nitrogen in the air reacts with oxygen at high temperatures. In particular, for the EURO-7 exhaust regulation, which includes cold start operation, efforts to reduce exhaust emissions during the warm-up process are required. Therefore, in this study, the characteristics of nitrogen oxides and fuel consumption were investigated during the warm-up process of cooling water from room temperature to 88℃ using a 2-liter direct injection spark ignition (SI) engine fueled with hydrogen. One advantage of hydrogen, compared to conventional fuels like gasoline, natural gas, and liquefied petroleum gas (LPG), is its wide flammable range, which allows for sparser control of the excessive air ratio. In this study, the excessive air ratio was varied as 1.6/1.8/2.0 during the warm-up process, and the results were analyzed. The experimental results show that as the excessive air ratio becomes sparser during warm-up, the emission of nitrogen oxides per unit time decreases, and the thermal efficiency relatively increases. However, as the time required to reach the final temperature becomes longer, the cumulative emissions and fuel consumption may worsen.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.72-82
• /
• 2024

This study aimed to develop a scientifically and systematically standardized xylooligosaccharide analytical method that can be applied to products with various formulations. The analysis method was conducted using HPLC with Cadenza C₁₈ column, involving pre-column derivatization with 1-phenyl-3-methyl-5-pyrazoline (PMP) and UV detection at 254 nm. The xylooligosaccharide content was analyzed by converting xylooligosaccharide into xylose through acid hydrolysis. The pre-treated methods were compared and evaluated by varying sonication time, acid hydrolysis time, and concentration. Optimal equipment conditions were achieved with a mobile phase consisting of 20 mM potassium phosphate buffer (pH 6)-acetonitrile (78:22, v/v) through isocratic elution at a flow rate of 0.5 mL/min (254 nm). Furthermore, we validated the advanced standardized analysis method to support the suitability of the proposed analytical procedure such as specificity, linearity, detection limits (LOD), quantitative limits (LOQ), accuracy, and precision. The standardized analysis method is now in use for monitoring relevant health-functional food products available in the market. Our results have demonstrated that the standardized analysis method is expected to enhance the reliability of quality control for healthy functional foods containing xylooligosaccharide.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.3
• /
• pp.177-182
• /
• 2008

Background: Isoniazid (INH, H) is a key drug of the standard first-line regimen for the treatment of tuberculosis (TB), yet some reports have suggested that treatment efficacy was maintained even though INH was omitted from the treatment regimen. Methods: One hundred forty C57BL/6 mice were infected with the H37Rv strain of M. tuberculosis with using a Glas-Col aerosol generation device, and this resulted in depositing about 100 bacilli in the lung. Four weeks after infection, anti-TB treatment was initiated with varying regimens for 4-8 weeks; Group 1: no treatment (control), Group 2 (4HREZ): 4 weeks of INH, rifampicin (R), pyrazinamide (Z) and ethambutol (E), Group 3: 1HREZ/3REZ, Group 4: 4REZ, Group 5: 4HREZ/4HRE, Group 6: 1HREZ/3REZ/4RE, and Group 7: 4REZ/4RE. The lungs and spleens were harvested at several time points until 28 weeks after infection, and the colony-forming unit (CFU) counts were determined. Results: The CFU counts increased steadily after infection in the control group. In the 4-week treatment groups (Group 2-4), even though the culture was negative at treatment completion, the bacilli grew again at the 12-week and 20-week time points after completion of treatment. In the 8-week treatment groups (Groups 5-7), the bacilli did not grow in the lung at 4 weeks after treatment initiation and thereafter. In the spleens of Group 7 in which INH was omitted from the treatment regimen, the culture was negative at 4-weeks after treatment initiation and thereafter. However, in Groups 5 and 6 in which INH was taken continuously or intermittently, the bacilli grew in the spleen at some time points after completion of treatment. Conclusion: TThe exclusion of INH from the standard first-line regimen did not affect the treatment outcome in a murine model of TB in the early stage of disease. Further studies using a murine model of chronic TB are necessary to clarify the role of INH in the standard first-line regimen for treating TB.

• Korean journal of food and cookery science
• /
• v.15 no.5
• /
• pp.490-499
• /
• 1999

The purpose of this study was to investigate the changes of taste components in the boiled beef brisket soup stock and shank soup stock by varying pretreatment, boiling temperature and time. Free amino acids and nucleotides color and sensory evaluation in each samples were analyzed. The results were obtained as follows : 1. The amount of free amino acids in the brisket soup stock pretreated by soaking and blanching showed a tendency to increase in proportion to boiling time. The amount of glutamic acid in the brisket soup stock was much in order of soaking > blanching > roasting pretreatment. While the amount of glutamic acid in the boiled soup stock samples pretreated by soaking and blanching was much more at low temperature than at high temperature, the glutamic acid contents in the boiled soup stock pretreated by roasting were large at high temperature. The amount of glutamic acid in pretreated by soaked soup stock showed the highest and recorded 8.73 mg% at 6 hour-low temperature-boiling. 2. The amount of free amino acids in the shank soup stock did not show any regular tendency and had few changes in quantity by the methods of pretreatment. Each amount of glutamic acid in the shank soup stock pretreated by soaking and blanching was the highest, when boiled for 3 hours at high temperature. The samples pretreated by roasting showed the highest record 2.49 mg%, when boiled for 6 hours at high temperature, but could not recognize any regular tendency in the case of boiling at low temperature. 3. The amount of nucleotides in the brisket soup stock generally showed increase in proportion to boiling time. The amount of 5'-IMP extracted from the brisket soup stock was much in order of blanching > soaking > roaking pretreatment, but few differences between blanching and soaking soup stock samples. The amount of 5'-IMP extracted from soup stock samples pretreated by soaking and blanching was high at low-boiling and by roasting at high-boiling. Each amount of 5'-IMP extracted from soup stocks pretreated by soaking(BSL) and blanching(BBL) was the highest at 6 hour-low-boiling(37.06 mg%), and 5 hours(38.37 mg%) respectively. The amount of 5'in the soup stock pretreated by roasting(BRH) showed the highest records at 6 hour-high-boiling(10.85 mg%). 4. The amount of 5'-IMP extracted from the shank soup stock preteated by soaking and blanching showed a tendency to decrease after 3 hours boiling irrelative of boiling temperature. The amount of 5'in the shank soup stock was much in order of soaking > blanching > roasting pretreatment and showed high at the boiling of high temperature. In the sample pretreated by roasting it showed the highst records when boiled for 6 hours at high temperature(1.55 mg%). 5. The L Value of the brisket soup stock pretreared by roasting at high temperature(BRH) was the lowest and the b value of it was the highest of all the brisket samples boiled for 6 hours. No differences were found in the Value of L, a, and b in shank soup stock by the methods of pretreatment and boiling temperature. 6. The sensory scores in color and flavor of the brisket soup stock showd that BRH was higher than the other samples, and the preference in taste and overall was the highest in BSH while it was the lowest in BRH. The preference in the all sensory characteristics of SSH was higher than any other shank soup stock, but did not show any significant difference statistically.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.310-339
• /
• 2015

In this paper, the possibility of a terrestrial fixed 4K UHD (Ultra High Definition) and mobile HD (High Definition) convergence broadcasting service through a single channel employing the FEF (Future Extension Frame) multiplexing technique in DVB (Digital Video Broadcasting)-T2 (Second Generation Terrestrial) systems is examined. The performance of such a service is also investigated. FEF multiplexing technology can be used to adjust the FFT (fast Fourier transform) and CP (cyclic prefix) size for each layer, whereas M-PLP (Multiple-Physical Layer Pipe) multiplexing technology in DVB-T2 systems cannot. The convergence broadcasting service scenario, which can provide fixed 4K UHD and mobile HD broadcasting through a single terrestrial channel, is described, and transmission requirements of the SHVC (Scalable High Efficiency Video Coding) technique are predicted. A convergence broadcasting transmission system structure is described by employing FEF and transmission technologies in DVB-T2 systems. Optimized transmission parameters are drawn to transmit 4K UHD and HD convergence broadcasting by employing a convergence broadcasting transmission structure, and the reception performance of the optimized transmission parameters under AWGN (additive white Gaussian noise), static Brazil-D, and time-varying TU (Typical Urban)-6 channels is examined using computer simulations to find the TOV (threshold of visibility). From the results, for the 6 and 8 MHz bandwidths, reliable reception of both fixed 4K UHD and mobile HD layer data can be achieved under a static fixed and very fast fading multipath channel.