• Journal of Korean Society of Water and Wastewater
• /
• 제21권6호
• /
• pp.709-715
• /
• 2007

The dewaterability of a sludge can be characterized by two ways: the residual moisture content in the sludge cake after dewatering process, and the filtration of the sludge. Time to filter (TTF) represents filtration processes that are special cases of the flow through a solid matrix concept. TTF characterizes a resistance to filtration. The sludge resistance, in turn, can be subdivided into resistances associated with the solid phase and the liquid phase to evaluate the effect of each of the two phases on sludge dewaterability. In order to determine the dewatering characteristics of the water sludge samples, TTF and zeta potential were measured. For these studies cationic polymer was chosen for water sludge dewatering experiments. The zeta potential of thickener sludges neared from minus values to zero values till 4 days after sampling. The dewaterability of thickener sludges using cationic polymer was deteriorated according to the increase of detention time. As the detention time was increased from 4 to 10 days, the optimal dose of the polymer was increased from 4 to 8mg/L. Therefore, the optimal detention time plays an important part for the dewaterability of a sludge.

• Journal of Korean Society on Water Environment
• /
• 제20권4호
• /
• pp.370-375
• /
• 2004

Synthetic organic polyelectrolytes can be used to condition sludges to enhance their dewaterability. When conditioning biological sludges, the charge on the polymer has a significant impact on the effectiveness of the polymer as a conditioner. The objectives of this investigation were to determine the most effective type and dosage of polymer for conditioning digested sludge prior to dewatering, and to investigate the relationship between dewaterability and particle size. 3 types of digested sludge were used under the different digestion processes like anaerobic digestion, aerobic digestion and intermittent aerobic digestion. CST(capillary suction time), TTF(time-to-filter) and SRF(specific resistance to filtration) were tested as a dewaterability index and the number of particle distribution was analyzed using particle size analyzer. The results indicate that cationic polymer appears to be required for effective conditioning of these 3 types digested sludge and the optimal polymer dosage is about 0.6% of SS. CST and TTF are well correlated with mean particle diameter of which the dimension order is 1.7.

• Journal of Environmental Health Sciences
• /
• 제37권6호
• /
• pp.467-473
• /
• 2011

Objectives: Wastewater treatment plants typically produce a large volume of waste sludge. In this study, the conditioning and dewatering properties of a digested and thickened sludge from an industrial wastewater treatment plant were investigated in order to improve the dewaterbility of the sludge. Methods: Jar-tests and Buchner funnel tests were carried out to assess the conditioning and dewatering properties of a waste sludge. TTF (Time to Filter Test) and SRF (Specific Resistance to Filtration) were adopted as the indices of sludge dewaterbility. Results: The valuation indices influencing the dewaterbility of the waste sludge, including TTF, SRF, water contents, VS/TS ratio and turbidity, were measured. The TTF and SRF of the digested and thickened sludge were decreased to 40 sec, $3.43{\times}10^{12}$ m/kg, and 39 sec, $1.09{\times}10^{12}$ m/kg, respectively. Conclusions: The conditioner composed of natural inorganic materials turned out to be effective in the reduction of sludge water contents.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제22권3호
• /
• pp.23-32
• /
• 2014

Recently, it is increase in the processing of organic waste using anaerobic digestion. Therefore, the studies on the processing method for increasing the anaerobic digestion waste water. But it is very difficult to solid-liquid separation, because the characteristics of anaerobic digestion waste water. So this study evaluate solid-liquid separation efficiency of anaerobic digestion sludge using CST(Capillary Suction Time), TTF(Time to Filter). To address this problem, a membrane filter press of the lab scale was produced and the anaerobic digestion wastewater was applied to it. Polymer coagulants were found to be most suitable 7192PLUS and 1T60, It is necessary to minimum injection concentration is 7192PLUS (200 mg/L), 1T60 (100 mg/L). To evaluate dehydration efficiency, it was measured the moisture content of the dehydrated cake and suspended solids of decanted water. As a result, showed that a high removal efficiency of 97.4% when the solid-liquid separation using the membrane filter press. And the moisture content of the dehydrated cake was less than 65%.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제27권3호
• /
• pp.27-39
• /
• 2019

In this study, thermal-alkali pre-treatment (THAP) optimal condition and co-digestion efficiency with THAP of the mixture food waste and sewage sludge were evaluated for improving the performances of co-digestion for mixed food waste and sewage sludge. The optimal condition of THAP was evaluated for solubilization COD, CST(Capillary Suction Time), TTF(Time to Filter), and volatile fatty acids (VFAs) with THAP temperature and NaOH concentration. In addition, the co-digestion of mixed food waste and sewage sludge were evaluated using biochemical methane potential (BMP) test. The optimal THAP reaction temperature and NaOH concentration of food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L to solubilization COD over 20%, CST and TTF under 60sec and VFAs concentration over 12,000 mg-COD/L, respectively. The optimal condition of co-digestion of mixed food waste and sewage sludge equal to THAP condition. Therefore, it was determined that the optimal condition of THAP reaction temperature and NaOH concentration for co-digestion of mixed food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• 제18권5호
• /
• pp.608-618
• /
• 2004

Since polyelectrolytes have been used as conditioners, conventionally only a single polyelectrolyte has been added for sludge conditioning. However, the amount of polyelectrolyte needed for optimal conditioning of sludge is very critical. Overdosing reduces the sludge dewaterbility. In this experimental study, sludge conditioning with single or dual polyelectrolyte was conducted to avoid problems associated with overdosing. Single polyelectrolyte conditioning was conducted by one of cationic, nonionic, and anionic polyelectrolytes. The dual polyelectrolyte conditioning was performed by adding one polyelectrolyte and another one in sequence. The dewaterbility of sludges were measured by SRF(specific resistance to filtration), TTF(time to filter), CST(capillary suction time) respectively. Additionally, parameters such as turbidity, zeta potential, viscosity of conditioned sludges or supematant were measured to evaluate the changed characteristics of sludge by addition of polyelectrolytes. From the experiment results, it was concluded that single polyelectrolyte conditioning had a high probability of overdosing, whereas dual polyelectrolyte conditioning resulted in a better dewaterbility and less chance of overdosing. But, it was also found that dosing sequence in dual conditioning was very important according to the characteristics of sludge. Parameters such as viscosity, turbidity, zeta potential were found to be useful as a means of evaluating sludge dewaterbility.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제10권2호
• /
• pp.125-131
• /
• 2002

This study was carried out to evaluated for dewaterability of sewage sludge using waste oystershell and loess. The Jar-Test and the Buchner funnel test were proceeded for the assessment of dewaterability of a thickened sludge and digested sludge. TTF(Time to Filter), SRF(Specific Resistance to Filtration) were adopted as the valuation indices of sludge dewaterability. Dewatering conditioner which composed of both oystershell and loess is much dewaterable than the one composed of only oystershell. In the course of combining with oystershell and loess, the following fact was found that the dewaterability of the combination which have the higher ratio of oystershell than that of loess is superior. The most suitable oystershell :loess ratio of dewatering conditioner is 9:1 in treating both thickened sludge and digested sludge.

• Journal of Korean Society of Environmental Engineers
• /
• 제34권10호
• /
• pp.651-655
• /
• 2012

This study aimed to investigate the effect of an inorganic conditioner composed of natural inorganic materials on the dewaterbility of sewage sludge and compare the performance with those of conventional organic polymeric conditioners. A dosage of 2.0 mg inorganic conditioner/g sludge TS decreased time to filter test (TTF), specific resistance to filtration (SRF), water content of dewatered sludge cake, turbidity from 146 to 41 sec, from $8.3{\times}10^{14}$ to $2.4{\times}10^{14}$ m/kg, from 82.1 to 77.1%, from 112 to 61.1 NTU, respectively, which was compatible to the conventional cation organic polymer. An inorganic conditioner would be used in sewage sludge treatment as a suitable alternative conditioner. Regression analysis showed a strong relationship among TTF, SRF, and water content.

• Membrane Journal
• /
• 제24권3호
• /
• pp.194-200
• /
• 2014

The purpose of this study was to evaluate the performance of newly developed Large Pore Micro-Filtration (LPMF) membrane in Lab size for the application of water treatment, and to find its problems with solutions. The out-to-inside filtration hollow fiber LPMF membrane of which average pore size was $5{\mu}m$ was used at this study and its material was the PET braid reinforced PVDF. Filtration tests were done through gravity with 30 cm water head difference or pressure below 1.5 bar, and the backwash was done instantaneously with the filtrate after pressurizing it to about 4 bar. The water flux of the LPMF membrane with 0.2 bar TMP (Trans Membrane Pressure) was 2 times higher than $0.4{\mu}m$ MF membrane with $0.05{\mu}m$ UF filtrate of the tap water and it was measured also with 20~30 cm water head difference which showed over 800 LMH at 30 cm water head difference. And Time-To-Filter (TTF) was performed by using $5{\mu}m$ filter paper to optimize coagulants and dosage which enhanced filtrate's turbidity and stabilized filtration flux. When the LPMF was operated with 30 cm gravity with very high dose of inorganic coagulants, the flux was maintained over 80 LMH with 93.5~99.5% turbidity removal. Especially, the filtration was maintained stably in the flux and about 97% of the recovery rate by instantaneous pressurized backwash with about 4 bar of the filtrate when the packing density was about 19%. But there was instability in filtration, since the TMP was continuously going up by inefficient backwash when the packing density was 43%.