• Pediatric Infection and Vaccine
• /
• v.18 no.2
• /
• pp.109-116
• /
• 2011

Purpose : Pneumococcus is one of the most important causes of invasive infection through the childhood period. In January 2008, the Clinical and Laboratory Standards Institute (CLSI) published revised penicillin breakpoints for Streptococcus pneumoniae and penicillin susceptibility rates of S. pneumoniae increased in Korea. This study was performed to determine the probability of oral amoxicillin for the empirical treatment achieving bactericidal exposure against pneumococcus using pharmacodynamics model. Methods : Twenty-three isolates of pneumococci were subjected to determine minimum inhibitory concentration (MIC) for ${\beta}$-lactams and macrolide. For the ${\beta}$-lactams, exposure of fT >MIC (time that free drug concentrations remain above the MIC) for 50% of the administration interval have determined the probability of target attainment (PTA), and regimens that had a PTA >90% were considered optimal. An analysis was performed by applying MIC of 23 isolates to a 5000-patient Monte Carlo simulation model. Results : Among 23 isolates from healthy children, 7 (30.4%) isolates were MIC ${\leq}$1.0 ${\mu}g$/mL and 19 (82.6%) were MIC ${\leq}$2 ${\mu}g$/mL for amoxicillin. Amoxicillin 40 mg/kg/day achieved PTA >90% at MIC ${\leq}$1.0 ${\mu}g$/mL but PTA decreased to 52% at MIC 2 ${\mu}g$/mL, whereas amoxicillin 90 mg/kg/day can predict 97% of PTA at MIC 2 ${\mu}g$/mL. Overall, oral amoxicillin 90 mg/ kg/day for the empirical treatment against pneumococcus can expect more successful response in Korean children. Conclusion : Considering the resistantce pattern of pneumococci in Korean children, we estimate that oral amoxicillin 90 mg/kg/day will provide a pharmacodynamic advantage for the empirical treatment against pneumococcus. And low dose amoxicillin or macrolide are expected to have higher chance of treatment failure than high dose oral amoxicillin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.205-212
• /
• 2021

The skin fibroblasts of different origins showed different expression levels of MMP-1 in response to TNF-α treatment or UV irradiation. We hypothesized that this is caused by polymorphism in the MMP-1 promoter region. To elucidate it, first of all, we analyzed and classified the genotype of the -1607 site of the MMP-1 promoter in 23 commercially available primary fibroblasts, and then we examined the expression of MMP-1 by TNF-α or UVB stimulation for each classified genotype. As a result of the analysis, fibroblasts with 6 1G/1G genotypes, 10 1G/2G genotypes, and 7 2G/2G genotypes were identified. Hs68 and Detroit 551 cell lines were confirmed to have 1G/2G genotypes. In the 1G/1G genotype, MMP-1 was expressed twice as high as that of the control group by TNF-α treatment, and was hardly expressed by UV light. In the case of the 1G/2G genotype, MMP-1 was expressed 2.45 fold higher by TNF-α treatment, and 1.4 fold by UV light than the control. In the case of the 2G/2G genotype, MMP-1 was expressed 1.35 fold by TNF-α treatment, and was highly expressed by 2.5 fold by ultraviolet rays compared to control. It can be estimated that MMP-1 expression is better induced in the 1G genotype by TNF-α and in the 2G genotype by UV light. In addition, it can be presumed that MMP-1 expression is increased by creating a site where the Ets transcription factor can bind by another G inserted at the -1607 position. These studies have not been conducted at all in fibroblasts in relation to skin aging, so it is an area that needs to be further studied in the future. In conclusion, since the skin is an organ that is affected by both intrinsic aging and photoaging at the same time, when analyzing the expression of MMP-1 as a target for improving skin aging, it is necessary to select cells with a genotype suitable for the experimental conditions of the study.

• Sleep Medicine and Psychophysiology
• /
• v.26 no.1
• /
• pp.44-48
• /
• 2019

Objectives: Insomnia is one of the most prevalent sleep disorders. Recent studies suggest that cognitive and physical arousal play an important role in the generation of primary insomnia. Studies have also shown that information processing disorders due to cortical hyperactivity might interfere with normal sleep onset and sleep continuity. Therefore, focusing on central nervous system arousal and normalizing the information process have become current topics of interest. It has been well known that neurofeedback can reduce the brain hyperarousal by modulating patients' brain waves during a sequence of behavior therapy. The purpose of this study was to investigate effects of neurofeedback therapy on electroencephalography (EEG) characteristics in patients with primary insomnia. Methods: Thirteen subjects who met the criteria for an insomnia diagnosis and 14 control subjects who were matched on sex and age were included. Neurofeedback and sham treatments were performed in a random order for 30 minutes, respectively. EEG spectral power analyses were performed to quantify effects of the neurofeedback therapy on brain wave forms. Results: In patients with primary insomnia, relative spectral theta and sigma power during a therapeutic neurofeedback session were significantly lower than during a sham session ($13.9{\pm}2.6$ vs. $12.2{\pm}3.8$ and $3.6{\pm}0.9$ vs. $3.2{\pm}1.0$ in %, respectively; p < 0.05). There were no statistically significant changes in other EEG spectral bands. Conclusion: For the first time in Korea, EEG spectral power in the theta band was found to increase when a neurofeedback session was applied to patients with insomnia. This outcome might provide some insight into new interventions for improving sleep onset. However, the treatment response of insomniacs was not precisely evaluated due to limitations of the current pilot study, which requires follow-up studies with larger samples in the future.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.259-278
• /
• 2022

With the spread of Artificial Intelligence (AI), various AI-based services are expanding in the financial sector such as service recommendation, automated customer response, fraud detection system(FDS), credit scoring services, etc. At the same time, problems related to reliability and unexpected social controversy are also occurring due to the nature of data-based machine learning. The need Based on this background, this study aimed to contribute to improving trust in AI-based financial services by proposing a checklist to secure fairness in AI-based credit scoring services which directly affects consumers' financial life. Among the key elements of trustworthy AI like transparency, safety, accountability, and fairness, fairness was selected as the subject of the study so that everyone could enjoy the benefits of automated algorithms from the perspective of inclusive finance without social discrimination. We divided the entire fairness related operation process into three areas like data, algorithms, and user areas through literature research. For each area, we constructed four detailed considerations for evaluation resulting in 12 checklists. The relative importance and priority of the categories were evaluated through the analytic hierarchy process (AHP). We use three different groups: financial field workers, artificial intelligence field workers, and general users which represent entire financial stakeholders. According to the importance of each stakeholder, three groups were classified and analyzed, and from a practical perspective, specific checks such as feasibility verification for using learning data and non-financial information and monitoring new inflow data were identified. Moreover, financial consumers in general were found to be highly considerate of the accuracy of result analysis and bias checks. We expect this result could contribute to the design and operation of fair AI-based financial services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.853-860
• /
• 2022

The purpose of this study is to suggest an improvement plan for the calculation method of the engineer standard wage rate (ESWR) and to compute a reasonable ESWR. To this end, an adequacy review of theESWR calculation criteria was conducted along with an extensive engineering industry survey. The survey results were analyzed using an effective response sample of 748 companies out of 1,000 survey samples extracted by stratifying the 5,879 survey population. The main results were as follows. ①When calculating the engineering service fee, the prime contractor's engineer wage is suitable for the ESWR. The ESWR can be estimated by the formula 'average wage÷[1-proportion of subcontract orders×(1-subcontract rate)].' ② The field survey showed that the number of monthly working days was 20.35-20.54 days at 99 % confidence interval, which was significantly different from the current standard (22 days). In addition, as a result of a legal review of the ESWR criteria, it was found that the number of working days should be calculated in accordance with the Labor Standards Act after 2022. ③ Applying government guidelines, the time difference between the wage survey and the ESWR application can be corrected by the past ESWR increase rate for a specific period. ④ Using modeling based on the analysis above, the current ESWR was 13.5-14.5 % lower than the appropriate level. A lower ESWR was driven by the non-reflection of subcontract structure (4.1 %), overestimation of monthly work days (6.8-7.8 %), and application of past wage (2.6 %). The proposed model is expected to be widely used in policy making, as it can provide a useful framework for calculating the standard wage rate in similar industries as well as calculating appropriate engineering fees.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.634-643
• /
• 2023

Purpose: Underground common duct fires are steadily occurring, and the proportion of property damage is particularly large among property and human casualties caused by fires. Especially, cable fires that occur in common areas can spread vertically quickly and pose a great risk. This paper aims to scientifically analyze the nature of the fire by reproducing the fire through experiments. Method: To analyze the characteristics of cable fires in underground common duct, heat release rate and temperature changes were measured through Room-corner (ISO 9705) test, and the vertical and horizontal propagation of cable fires was quantitatively compared and analyzed. Result: The Room Corner Test (ISO 9705) was used to compare the temperature changes at each data logger point. The results showed that the time it took for the fire to reach the ignition temperature in the horizontal and vertical directions from the center point of the first-tier cable was 589 seconds and 536 seconds, respectively, which means that the vertical fire propagation is 53 seconds faster than the horizontal propagation. This proves that the vertical propagation of fire is relatively faster than the horizontal propagation. The horizontal propagation speed of the fire was also compared for each floor cable tray. The results showed that the third-tier cable propagated at 3.4 times the speed of the second-tier cable, and the second-tier cable propagated at 1.5 times the speed of the first-tier cable. This means that the higher the cable is located, the faster the fire spreads and the larger the fire becomes. Conclusion: This study identified the risks of cable fires and analyzed the risks of vertical fire propagation during cable fires based on the results of the Room Corner Test. Studies to prevent the spread of fire and fire response policies to prevent vertical fire propagation are required. The results of this study are expected to be used to assess the fire risk of common areas and other fires.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.147-154
• /
• 2023

This study aims to determine the necessity, role, utilization, and operation and management plan in relation to the underwater space platform where humans can newly reside. It provides a comprehensive opinion on the need for creating undersea space and operation plans based on opinions of industry-university-affiliated organizations involved in the R&D project of the Ministry of Maritime Affairs and Fisheries for the utilization of undersea space and external experts participating in marine technology development. In this study, a survey was conducted on researchers participating in the construction of a Korean submarine space platform. FGI was conducted on marine technology development experts. Results were then derived. As a result of the analysis, the need for subsea space construction was found to be high. As for the role of subsea space, the most common opinion was to develop technology for utilizing subsea space and to secure marine science research functions. It was found that the creation of subsea space would have a positive impact on the domestic industry, especially the deep-sea development industry and the shipbuilding/offshore structure industry. In terms of utilization, after the end of the seabed space test bed, the response to utilization as a marine observation base and marine ecosystem research had the highest proportion. As for expected inconvenience, discomfort in the psychological environment was the highest. Experts suggest that securing a continuous budget is most important for stable operation in the future and that securing a manpower budget is essential for itemized budgets. In addition, it was judged that it would be appropriate to establish a prior agreement from the time of the prior agreement and prepare a countermeasure before proceeding with the project in order to ensure ownership issues, consignment management issues, and cost issues when using the project after the end of the project.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.811-825
• /
• 2023

In accordance with the government's stance of actively promoting intelligent administrative service policies through data utilization, in the disaster and safety management field, it also is proceeding with disaster and safety management policies utilizing data and constructing systems for responding efficiently to new and complex disasters and establishing scientific and systematic safety policies. However, it is difficult to quickly and accurately grasp the on-site situation in the event of a disaster, and there are still limitations in providing information necessary for situation judgment and response only by displaying vast data. This paper focuses on deriving specific needs to make disaster situation management work more intelligent and efficient by utilizing intelligent information technology. Through individual interviews with workers at the Central Disaster and Safety Status Control Center, we investigated the scope of disaster situation management work and the main functions and usability of the geographic information system (GIS)-based integrated situation management system by practitioners in this process. In addition, the data built in the system was reclassified according to purpose and characteristics to check the status of data in the GIS-based integrated situation management system. To derive needed to make disaster situation management more intelligent and efficient by utilizing intelligent information technology, 3 strategies were established to quickly and accurately identify on-site situations, make data-based situation judgments, and support efficient situation management tasks, and implementation tasks were defined and task priorities were determined based on the importance of implementation tasks through analytic hierarchy process (AHP) analysis. As a result, 24 implementation tasks were derived, and to make situation management efficient, it is analyzed that the use of intelligent information technology is necessary for collecting, analyzing, and managing video and sensor data and tasks that can take a lot of time of be prone to errors when performed by humans, that is, collecting situation-related data and reporting tasks. We have a conclusion that among situation management intelligence strategies, we can perform to develop technologies for strategies being high important score, that is, quickly and accurately identifying on-site situations and efficient situation management work support.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.979-995
• /
• 2023

As wildfires are difficult to predict, real-time monitoring is crucial for a timely response. Geostationary satellite images are very useful for active fire detection because they can monitor a vast area with high temporal resolution (e.g., 2 min). Existing satellite-based active fire detection algorithms detect thermal outliers using threshold values based on the statistical analysis of brightness temperature. However, the difficulty in establishing suitable thresholds for such threshold-based methods hinders their ability to detect fires with low intensity and achieve generalized performance. In light of these challenges, machine learning has emerged as a potential-solution. Until now, relatively simple techniques such as random forest, Vanilla convolutional neural network (CNN), and U-net have been applied for active fire detection. Therefore, this study proposed an active fire detection algorithm using state-of-the-art (SOTA) deep learning techniques using data from the Advanced Himawari Imager and evaluated it over East Asia and Australia. The SOTA model was developed by applying EfficientNet and lion optimizer, and the results were compared with the model using the Vanilla CNN structure. EfficientNet outperformed CNN with F1-scores of 0.88 and 0.83 in East Asia and Australia, respectively. The performance was better after using weighted loss, equal sampling, and image augmentation techniques to fix data imbalance issues compared to before the techniques were used, resulting in F1-scores of 0.92 in East Asia and 0.84 in Australia. It is anticipated that timely responses facilitated by the SOTA deep learning-based approach for active fire detection will effectively mitigate the damage caused by wildfires.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.174-197
• /
• 2024

Personal ornaments made from precious metals that have been excavated from tombs dating to the Maripgan period (4th-6th century) of the Silla Kingdom are a major subject of analysis in the study of gender and hierarchy among the tomb occupants. Nonetheless, bracelets had been neglected until Ha Daeryong's recent research on determining gender through bracelets attracted attention. Accordingly, an examination and organization of the fundamental elements of Silla bracelets was needed. In response, this paper examines their physical characteristics, appearance, changes over time, and related wearing practices. The data for this study is derived from 176 bracelets, mostly made from silver or gold. Copper and glass bracelets are also included. Many of them were cast in a single-use earthen mold. Even the notched and protruding designs were created by casting rather than carving. Glass bracelets and bracelets with dragon designs were made using molds with round cavities. Excluding those produced using metal sheets, the rest of the bracelets are thought to have been cast in a mold with a long-string-shaped cavity and then bent round. After being bent, the two ends were either soldered together (closed type) or left open (open type). As demonstrated in the study by Lee Hansang, Silla bracelets evolved from plain rounded rod-shaped bracelets, such as the one excavated from the Northern Mound of Hwangnamdaechong Tomb, to versions with notched designs, and eventually to those with protruding designs, which gained popularity by the sixth century. The precedents of plain rounded rod-shaped bracelets are presumed to have been thin rod-shaped bracelets from the Proto-Three Kingdoms period. Bracelets need to be fit to the wrists so that they do not slip off easily when worn. The open type design was the preferable way to achieve this. Moreover, given the ductility of gold, silver, and copper, it seems that it would have been possible to stretch or deform them. In the end, I concluded that even if a bracelet is too small to pass man's hand, the open type could have been worn. Furthermore, if a closed-type bracelet were pressed into an oval shape, it would not be impossible for a man to put it on. When bracelets are divided according to their degree of deformability into type A (the open type) through type D, which is almost impossible to deform, type A is commonly found with wearers of thin hollow earrings, and types C and D (which are difficult to deform) are not found with wearers of thin hollow earrings, but only with wearers of thick hollow earrings. Therefore, it can be seen that men were allowed to wear bracelets, and the existing studies that differentiate between men and women based on the wearing of thin hollow earrings, thick hollow earrings, and swords remain valid.