• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.52-59
• /
• 2011

Corrosion of metallic materials occurs by the reaction with corrosive environment such as atmosphere, marine, soil, urban, high temperature etc. In general, reduction of thickness and cracking and degradation are resulted from corrosion. Corrosion in all industrial facilities and infrastructure causes large economic losses as well as a large number of accidents. Economic loss by corrosion has been reported to be nearly 1-6% of GNP or GDP. In order to reduce corrosion damage of industrial facilities, corrosion map as well as a systematic investigation of the loss of corrosion in each industrial sector is needed. The Corrosion Science Society of Korea in collaboration with 15 universities and institutes has started to survey on the cost of corrosion and corrosion map of Korea since 2005. This work presents the results of the survey on cost of corrosion by Uhlig, Hoar, and input-output methods, and the evaluation of atmospheric corrosion rate of carbon steel, weathering steel, galvanized steel, copper, and aluminum in Korea. The total corrosion cost was estimated in terms of the percentage of the GDP of industry sectors and the total GDP of Korea. According to the result of Input/output method, corrosion cost of Korea was calculated as 2.9% to GDP (2005). Time of wetness was shown to be categories 3 to 4 in all exposure areas. A definite seasonal difference was observed in Korea. In summer and fall, time of wetness was higher than in other seasons. Because of short exposure period (12 months), significant corrosion trends depending upon materials and exposure corrosion environments were not revealed even though increased mass loss and decreased corrosion rate by exposure time.

• 한국응용곤충학회지
• /
• 제26권4호
• /
• pp.221-228
• /
• 1987

도열병균(稻熱病菌)(Pyricularia oryzae)의 포자발아(胞子發芽)에 가장 적합한 온도는 $26{\sim}30^{\circ}C$였으며, 발아(發芽)에 필요한 최소한의 수분존재시간(水分存在時間)은 4시간으로 나타났고, $34^{\circ}C$에서는 발아율(發芽率)이 10% 이하로 낮게 나타났다. 포자발아(胞子發芽)에 대한 상대습도의 영향은 고온(高溫)인 $34^{\circ}C$에서만 차이가 있었고 나머지 처리에서는 유의적(有意的)인 차이가 없었다(P>0.05). 발병효율(發病效率)은 $26^{\circ}C$에서 가장 높게 나타났으며 $18^{\circ}C$와 $22^{\circ}C,\;30^{\circ}C$에서는 $26^{\circ}C$에 비해 약 20% 정도였다. 주당(株當) 1개 이상의 병반(病斑)을 형성하는데 필요한 평균수분존재시간(平均水分存在時間)은 $18^{\circ}C$에서 22시간, $22^{\circ}C$에서 16시간, $26^{\circ}C$에서 10시간, $30^{\circ}C$에서는 8시간이었으며, $34^{\circ}C$에서는 주당(株當) 1개 이상의 병반(病斑)을 형성하지 못하였다. 접종(接種)후 병반(病斑) 발현시(發現時)까지의 잠복기간(潛伏其間)은 $18^{\circ}C$에서 $7{\sim}8$일(日), $22{\sim}26^{\circ}C$에서는 약 $4{\sim}5$일(日), $30^{\circ}C$에서는 $3{\sim}4$일(日)이었다. 병반(病斑) 크기 증가율(增加率)은 온도 및 습도조건과 밀접한 관계를 보였다. 1일당(日當) 평균(平均) 병반(病斑) 크기 증분(增分)은 상대습도 90% 이상인 경우, $18^{\circ}C$와 $22^{\circ}C$에서 0.7mm, $26^{\circ}C$에서 1mm, $30^{\circ}C$에서는 0.8mm 였고, 상대습도 85% 이하에서는 $30^{\circ}C$를 제외한 온도 조건에서 90% 이상에서의 증분(增分)의 $50{\sim}60%$ 밖에 되지 않았다.

• 한방안이비인후피부과학회지
• /
• 제10권1호
• /
• pp.284-305
• /
• 1997

A Literatural study on the etiological factors, classification, prescription of hemorrhoids and hemorrhoids complicated by anal fistula following results were obtained. 1. The cause of hemorrhoids are long time sit, long time gate, overfatigue, overeating, imbalance of stool( constipation or diarrhea), pregnant fertility(overfatigue after childbirth, insufficiency of middle warmer energy), uncontrol sexual excess, pathgenic factors of wetness, heat, wind, dry, genetic cause, excess of anxiety, pile up of heat poison, weakness of entrails and viscera. The cause of hemorrhoid complicated by anal fistula are attack of external wind, heatness, dry, fire, wetness(pathgenic factors), inapporiate treatment and chronic disease, greasy diet, excess of anxiety, constipation, uncontrol sexual excess, obstacle of circulation of vital energy and blood on anal site. 2. Classification of hemorrhoids are female hemorrhoids, male hemorrhoids, pulse hemorrhoids, intestines hemorrhoids, vital energy hemorrhoids, wine hemorrhoids, blood hemonhoids, flowing hemorrhoids. Classification with other method are external hemorrhoids, internal hemorrhoids, mixed hemorrhoids, excrescence hemorrhoids, nipple homorrhoids. External hemorrhoids is classified of varicosis of hemorrhoidal vein, connective tissue form, thrombus form. Classification of hemorrhoid complicated by anal fistula are simple lower hemorrhoid, lower mixed hemorrhoid, deep hemorrhoid, outer of one hole hemorrhoid, a horseshoe hemorrhoids. Once more classificated of four are space of sphincter muscle form, penetration sphincter muscle form, upper of sphincter muscle form, outer of sphincter muscle form. 3. Therapy method of hermorrhoid and hemorrhoid complicated by anal fistula are internal method, fumigation method method, ointment, method of close with medicine, necrotizing method, hot medicated compress( gxternal method), injection, insertion, bind, (operation) and acupuncture therapy (the others method) 4. Herb medicine for many used of internal method are Scutellaria baikalensis George(黃芩), Coptis japonia Makino(黃連), Rehmania giutinosa Liboschitz ex Fischer & Meyer(生地黃), Poncirus trifoliata Refinesque(枳殼), Sanguisorba officinalis Linne(地楡), Sophora japonica L.(槐花), Cnidium officinale Makino (川芎), Astragalus membranaceus Bunge(황기), Angelica gigas Nakai (當歸). 5. Herb medicine for many used of fumigation are Schlechtendalia Chinesis J. Bell (五倍子), Artemisia Vulgaris L. var indica Maxim(艾葉), Poncirus trifoliata Refinesque (枳殼), Nepeta japonica Maximowicy(荊芥), And herb medicine for many used of ointment are Calomelas(輕粉), Alum(白礬), Boswellia carterii Birdwood(乳香), Os Draconis Fossilia Ossis Mastodi(龍骨).

• Restorative Dentistry and Endodontics
• /
• 제37권3호
• /
• pp.155-159
• /
• 2012

Objectives: To investigate the effect of dentin moisture degree and air-drying time on dentin-bond strength of two different one-step self-etching adhesive systems. Materials and Methods: Twenty-four human third molars were used for microtensile bond strength testing of G-Bond and Clearfil $S^3$ Bond. The dentin surface was either blot-dried or air-dried before applying these adhesive agents. After application of the adhesive agent, three different air drying times were evaluated: 1, 5, and 10 sec. Composite resin was build up to 4 mm thickness and light cured for 40 sec with 2 separate layers. Then the tooth was sectioned and trimmed to measure the microtensile bond strength using a universal testing machine. The measured bond strengths were analyzed with three-way ANOVA and regression analysis was done (p = 0.05). Results: All three factors, materials, dentin wetness and air drying time, showed significant effect on the microtensile bond strength. Clearfil $S^3$ Bond, dry dentin surface and 10 sec air drying time showed higher bond strength. Conclusions: Within the limitation of this experiment, air drying time after the application of the one-step self-etching adhesive agent was the most significant factor affecting the bond strength, followed by the material difference and dentin moisture before applying the adhesive agent.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.435-448
• /
• 2022

Objectives: As the time spent wearing masks has increased with spread of COVID-19, various research related to masks have been reported. However, there are still few experiments on the physiological response of the body to wearing industrial dust masks in South Korea. Considering the actual working hours at the work site, it is necessary to investigate the comfort of industrial dust masks. Therefore, this study aims to confirm the change in subjective discomfort level according to the wearing time for industrial dust masks in South Korea that have been certified for safety by KCS. Methods: This study evaluated subjective discomfort level over four hours. The experimental conditions were five types: not worn (control group), special grade, first grade, second grade (with valve), and second grade (without valve). The subjective discomfort levels were classified for breathing, warmth (body and face) and wetness (body and face). Subjects recorded their discomfort level on a checklist every one hour. Results: In special grade and second grade (without valve), the discomfort level in terms of breathing, warmth (face), and wetness (face) was significantly higher than that of the control group. However, the effects of all kinds of industrial dust masks on the discomfort level in the body were low. Conclusions: Since this study was conducted on subjects working in an office with a comfortable working environment, it is difficult to apply it to workers at actual industrial sites. However, it is considered meaningful as the first clinical study to evaluate the subjective level of discomfort over a long time for domestic industrial dust masks that have been certified for safety by KCS.

• 한국농림기상학회지
• /
• 제7권1호
• /
• pp.78-90
• /
• 2005

각 지점의 강우 발생에 따른 토양수분의 감쇄 현상을 특성화 할 수 있는 감쇄 곡선의 경험식을 도출하였다. 시간에 따른 토양수분의 감쇄 곡선은 거의 모든 지점에서 지표와 지하에 걸친 토양수분 측정 자료들과 높은 일치성을 나타내었다. 각 사면에서의 감쇄 특성 을 살펴보면 사면 상부에서 하부로 내려올수록 추정된 감쇄 곡선에 보다 더 수렴하는 경향을 보였다. 또한 각 지점별로 감쇄 곡선이 각 강우에 대하여 재현되는 경향을 보여 각 지점에서 포화와 감쇄가 각 지점의 고유한 특성을 가지고 있음을 나타내었다. 또한, 강우 발생에 대한 토양수분의 감쇄와 충전 등의 사면의 특성화에 기준이나 지표로서의 습윤지수의 유의성을 확인할 수 있었다. 궁극적으로 사면 유출의 명확한 기작을 규명하는데 있어서 보다 더 객관적인 검증을 위하여 계절별, 연별과 같은 추가적인 토양수분의 측정과 정밀도 있는 자료의 분석이 필요할 것으로 사료된다.

• Corrosion Science and Technology
• /
• 제16권6호
• /
• pp.273-277
• /
• 2017

Atmospheric corrosion is clearly the most noticeable of all corrosion processes. A tremendous amount of economic losses are caused by atmospheric corrosion. Thus, it is imperative to know the level of atmosphere's aggressiveness or in other words "corrosivity", before designing or planning any corrosion prevention strategy. In Singapore, corrosivity values were not recorded earlier though the process of measurement and recording was prevalent in other countries. With an aim of filling this gap, three test sites were setup at three locations in Singapore to represent marine, industrial and urban atmospheres or their mixtures. Subsequently, corrosivity readings were measured and recorded according to ISO 9223:2012 for the first time in Singapore. Salient atmospheric constituents or parameters like time of wetness (TOW), $Cl^-$, $SO_2$, $NO_2$, $O_3$, and $HNO_3$ were measured at all sites over a period of time to categorize corrosivity of particular atmosphere. The effect of the atmosphere on corrosion of steel, Cu, Al, and Zn has also been investigated and quantified. "Estimated" and "determined" corrosivities were quantified and compared according to ISO 9223 standard. The study data along with final corrosivity measurements will be presented and discussed in the present work.

• 한국농림기상학회지
• /
• 제26권1호
• /
• pp.63-74
• /
• 2024

농업에서 서리는 치명적인 피해를 가져오기 때문에 관측과 예측이 매우 중요하다. 기상청 서리관측자료를 분석한 최근 보고에 따르면 기후변화에 따른 지구온난화에도 불구하고 봄철 늦서리일이 빨라지지 않았고, 서리 빈도도 감소하지 않았다. 따라서 농업 서리피해에 대비하여 위험 예상 지역에서의 서리 관측 자동화와 지속적인 운영이 중요하다. 기존에 활용되고 있는 엽면습윤센서를 이용한 서리관측은 관측센서의 오염이나 주변 환경의 습도 변화에 따라 기준 전압값이 장기간에 걸쳐 변동하는 문제가 있었다. 본 연구에서는 이러한 문제를 자동적으로 해결하도록 데이터로거 프로그램으로 구현하였다. 구축된 서리자동관측시스템은 안정적으로 장기간에 걸쳐 시간 고해상도 관측자료를 축적할 수 있다. 이 자료는 향후 기계학습 방법을 이용한 서리 진단모델의 개발과 주변 지역에 대한 서리발생 예측 정보 생산에 활용할 수 있을 것이다.

• 센서학회지
• /
• 제31권2호
• /
• pp.79-84
• /
• 2022

Self-powered sensors play an important role in everyday life, and they cover a wide range of topics. These sensors are meant to measure the amount of relevant motion and transform the biomechanical activities into electrical signals using triboelectric nanogenerators (TENGs) since they are sensitive to external stimuli such as pressure, temperature, wetness, and motion. The present advancement of TENGs-based self-powered wearable, implantable, and patchable sensors for healthcare monitoring, human body motion, and medication delivery systems was carefully emphasized in this study. The use of TENG technology to generate electrical energy in real-time using self-powered sensors has been the topic of considerable research among various leading scholars. TENGs have been used in a variety of applications, including biomedical and healthcare physical sensors, wearable devices, biomedical, human-machine interface, chemical and environmental monitoring, smart traffic, smart cities, robotics, and fiber and fabric sensors, among others, as efficient mechanical-to-electric energy conversion technologies. In this evaluation, the progress accomplished by TENG in several areas is extensively reviewed. There will be a discussion on the future of self-powered sensors.

• Corrosion Science and Technology
• /
• 제10권3호
• /
• pp.87-94
• /
• 2011

The typical corrosion prevention method inside the steel upper box girder in a suspension bridge involves the use of paints. However, in an effort to reduce environmental impact and cost, the suspension portion of the Yeongjong Bridge, Korea utilizes dehumidification systems to control humidity and prevent corrosion inside its box girder. Maintaining a uniform humidity distribution at the proper level inside the box girder is critical to the successful corrosion control. In this study, the humidity and the resultant atmospheric corrosivity inside the box girder of the Yeongjong Bridge was monitored. The corrosion rate of the steel inside the box girder was obtained using thin-film electrical resistance (TFER) corrosion sensors. Time-of-wetness (TOW) measurements and the deposition rates of atmospheric pollutants such as $Cl^{-}$ and $SO_{x}$ were also obtained. Classification of the atmospheric corrosivity inside the box girder was evaluated according to ISO 9223. As a result, no corrosion was found in the upper box girder, indicating that the dehumidification system used in the Yeongjong Bridge is an effective corrosion control method.