• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.153-158
• /
• 2012

A new diversity combining scheme is proposed for time-of-arrival (TOA) estimation of chirp signal in dense multipath channel. In the multipath channel, the performance of TOA estimation using conventional correlation matrix-based diversity combining scheme is degraded due to the lack of de-correlation effect. To increase the de-correlation effect, the proposed diversity scheme employs interleaving method based on the property of de-chirped signal. As a result, the proposed scheme increases de-correlation effect and also reduces the noise of TOA estimation. Finally, the diversity achieved from the proposed scheme improves TOA estimation performance. The de-correlation effect is analyzed mathematically. The estimation accuracy of the proposed diversity scheme is superior to that of conventional diversity scheme in multipath channel.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.27-35
• /
• 2015

대기행렬 시스템에는 고객들의 대기시간이 지나치게 길어지는 것을 막기 위해 다양한 정책들이 적용되는데, 본 연구에서는 고객숫자에 따른 제어 정책을 갖는 유한용량 M/G/1/K 대기행렬을 분석한다. 고객의 숫자에 따라 서버의 서비스율과 고객의 도착율을 조절하는 정책이다. 두 개의 한계점(thresholds) $L_1$과 $L_2$($${\geq_-}$$L1)를 설정하고 시스템 내 고객의 숫자가 $L_1$보다 작을 때는 시스템은 보통(또는 상대적으로 느린)의 서비스율(service rate)과 보통의 도착율(arrival rate)을 갖는다. 고객의 숫자가 증가하여 $L_1$이상이고 $L_2$보다 작으면 도착율은 그대로 이지만 서비스율을 증가시켜 빠르게 서비스한다. 이후 고객의 숫자가 더욱 증가하여 $L_2$ 이상이면 고객의 도착율도 작은 값으로 바꾸어 고객을 덜 입장시킨다. 위 정책을 갖는 M/G/1/K 대기행렬을 내재점 마코프 체인과 준-마코프 과정을 이용하여 분석하고 수치예제를 제시한다.

• ETRI Journal
• /
• 제36권3호
• /
• pp.460-468
• /
• 2014

This paper addresses the problem of joint time of arrival (TOA) and direction of arrival (DOA) estimation in impulse radio ultra-wideband systems with a two-antenna receiver and links the joint estimation of TOA and DOA to the sparse representation framework. Exploiting this link, an orthogonal matching pursuit algorithm is used for TOA estimation in the two antennas, and then the DOA parameters are estimated via the difference in the TOAs between the two antennas. The proposed algorithm can work well with a single measurement vector and can pair TOA and DOA parameters. Furthermore, it has better parameter-estimation performance than traditional propagator methods, such as, estimation of signal parameters via rotational invariance techniques algorithms matrix pencil algorithms, and other new joint-estimation schemes, with one single snapshot. The simulation results verify the usefulness of the proposed algorithm.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.153-162
• /
• 1997

M/G/1 queueing system is one of the most widely used one to model the real system. When operating a real systems, since it often takes cost, some control policies that change the operation scheme are adopted. In particular, the N-policy is the most popular among many control policies. Almost all researches on queueing system are based on the assumption that the arrival rates of customers into the queueing system is constant, In this paper, we consider the M/G/1 queueing system whose arrival rate varies according to the servers status : idle, set-up and busy states. For this study, we construct the steady state equations of queue lengths by means of the supplementary variable method, and derive the PGF(probability generating function) of them. The L-S-T(Laplace Stieltjes transform) of waiting time and average waiting time are also presented. We also develop an algorithm to find the optimal N-value from which the server starts his set-up. An analysis on the performance measures to minimize total operation cost of queueing system is included. We finally investigate the behavior of system operation cost as the optimal N and arrival rate change by a numerical study.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.886-893
• /
• 2010

This paper considers the problem of time difference-of-arrival(TDOA) source localization when the TDOA and angle of arrival(AOA) measurements from an airborne emitter source are subject to ground-platform sensor position. The optimization of sensors' position is a challenging problem and a solution with good localization accuracy has yet to be found. This paper proposes an estimator that can achieve these purposes and provides optimized sensor position for good localization accuracy using the proposed estimator. The developed algorithm and sensor position are then examined under the special case of a single airborne source. The theoretical developments are supported by simulations.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.146-150
• /
• 2015

COSPAS-SARSAT 위원회에서는 2000년 이후부터 새롭게 발사되는 미국, EU, 러시아의 중궤도 항법위성에 탐색구조 탑재체를 탑재하여 중궤도 탐색구조(MEOSAR) 서비스를 제공키로 결정하였다. 비컨에서 송출되는 조난신호는 비컨 상공의 각 위성들에 각기 다른 도달시간과 도플러 주파수를 가지고 도달하며, 이를 바로 중궤도 수신국(MEOLUT)으로 전달한다. 중궤도 수신국에서는 적어도 3~4개의 위성을 동시에 추적하여 조난신호를 전달받고, 조난신호 간 TDOA(Time Difference of Arrival)와 FDOA(Frequency Difference of Arrival)를 이용하여 비컨의 위치를 추정한다. 그러나 비컨은 임의의 시간에 50초 간격으로 조난신호를 송출하므로, 대형 조난상황에서 비컨 신호가 겹치는 현상이 나타날 수 있고, 겹쳐진 비컨 신호들을 COSPAS-SARSAT에서 개발하고 있는 현재 방식으로 모든 비컨 위치를 추정하는 것은 어렵다. 따라서 여기에서는 이를 해결하기 위한 방안으로 CAF MAP 알고리즘을 소개하고, COSPAS-SARSAT 시스템의 성능 요구사항을 만족시킬 수 있도록 MCAF MAP 기법을 제안하고, 그 성능을 나타낸다.

• Journal of Astronomy and Space Sciences
• /
• 제37권1호
• /
• pp.43-50
• /
• 2020

We have developed an algorithm for tracking coronal mass ejection (CME) propagation that allows us to estimate CME speed and its arrival time at Earth. The algorithm may be used either to forecast the CME's arrival on the day of the forecast or to update the CME tracking information for the next day's forecast. In our case study, we successfully tracked CME propagation using the algorithm based on g-values of interplanetary scintillation (IPS) observation provided by the Institute for Space-Earth Environmental Research (ISEE). We were able to forecast the arrival time (Δt = 0.30 h) and speed (Δv = 20 km/s) of a CME event on October 2, 2000. From the CME-interplanetary CME (ICME) pairs provided by Cane & Richardson (2003), we selected 50 events to evaluate the algorithm's forecast capability. Average errors for arrival time and speed were 11.14 h and 310 km/s, respectively. Results demonstrated that g-values obtained continuously from any single station observation were able to be used as a proxy for CME speed. Therefore, our algorithm may give stable daily forecasts of CME position and speed during propagation in the region of 0.2-1 AU using the IPS g-values, even if IPS velocity observations are insufficient. We expect that this algorithm may be widely accepted for use in space weather forecasting in the near future.

• 지구물리와물리탐사
• /
• 제10권2호
• /
• pp.131-137
• /
• 2007

초동발췌 방법과 이와 관련된 오차문제를 고찰하고 자료처리 전산화 측면에서 초동발췌 및 오차계산의 실용적 알고리즘을 제안하였다. 제안한 초동발췌 방법은 2단계로 구성된다. 1) 초동신호 중 트레이스 간 연속성이 양호한 최초의 피크(peak) 또는 트라프(trough)를 발췌한다. 2) 발췌시점 전방 일정구간의 기록을 직선으로 근사화 하고 이 직선의 시간 절편을 초동주시로 한다. 근사화 구간의 길이는 대략 초동 웨이브렛 폭의 1/4보다 다소 작게 설정한다. 초동발췌에 내재된 오차의 정량적인 척도는 기록의 특정시점에 초동의 도착 여부를 판단하는 데 필요한 기록의 길이로 정의한다. 기록의 길이를 나타내는 공식은 신호의 주파수대역과 신호대잡음비의 함수로 표시된다. 3개의 공대공 탄성파기록의 초동을 수동 및 제안한 방법으로 발췌하였고 각 트레이스의 오차한계를 계산하였다. 실험결과 제안한 근사직선 시간절편법의 우수한 성능과 발췌된 초동평가에 있어서 발췌오차의 유용성을 확인하였다.