• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.795-804
• /
• 1999

The increasing number of users of mobile communication systems and the corresponding need for increased system capacity require the use of a modulation scheme which is both power and spectrally efficient. In this paper, we numerically calculate the BER performance of DS/CDMA-BPSK system in different fading channel (Rayleigh, Rician, Shadow Rician). Also, we calculate BER performance and the channel capacity of DS/CDMA-BPSK system which is constant or nearly constant envelopes in 3-state fading channel model. The Shadow Rician fading model described in this paper apply the parameters of the Canadian Mobile Satellite (MSAT). And we assume that the 3-state fading channel model is consist of Rayleigh fading state, Rician fading state, and shadow Rician fading state. This model can be used as a basis for the simulation of the land mobile satellite channel. The dynamic 3-state fading channel model is considered corresponding to different environments and the transitions between these environments. From the numerically calculate results, the DS/CDMA-BPSK system with MUI-20, PG-511 can not achieve the BER performance ($P_b\leq10^{-5}$). And the channel capacity did not meet the system requirement. Also, we know that the BER performance is depend m the occupancy probability of radio channel and the degree of shadow. From the results, we how that during shadowed time intervals it is necessary to use some form of error control coding and receiver diversity in order to support reliable data communication.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.117-125
• /
• 2016

PURPOSES : The density in uninterrupted traffic flow facilities plays an important role in representing the current status of traffic flow. For example, the density is used for the primary measures of effectiveness in the capacity analysis for freeway facilities. Therefore, the estimation of density has been a long and tough task for traffic engineers for a long time. This study was initiated to evaluate the performance of density values that were estimated using VDS data and two traditional methods, including a method using traffic flow theory and another method using occupancy by comparing the density values estimated using vehicular trajectory data generated from a radar detector. METHODS : In this study, a radar detector which can generate very accurate vehicular trajectory within the range of 250 m on the Joongbu expressway near to Dongseoul tollgate, where two VDS were already installed. The first task was to estimate densities using different data and methods. Thus, the density values were estimated using two traditional methods and the VDS data on the Joongbu expressway. The density values were compared with those estimated using the vehicular trajectory data in order to evaluate the quality of density estimation. Then, the relationship between the space mean speed and density were drawn using two sets of densities and speeds based on the VDS data and one set of those using the radar detector data. CONCLUSIONS : As a result, the three sets of density showed minor differences when the density values were under 20 vehicles per km per lane. However, as the density values become greater than 20 vehicles per km per lane, the three methods showed a significant difference among on another. The density using the vehicular trajectory data showed the lowest values in general. Based on the in-depth study, it was found out that the space mean speed plays a critical role in the calculation of density. The speed estimated from the VDS data was higher than that from the radar detector. In order to validate the difference in the speed data, the traffic flow models using the relationships between the space mean speed and the density were carefully examined in this study. Conclusively, the traffic flow models generated using the radar data seems to be more realistic.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.19-26
• /
• 2015

Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.27-40
• /
• 2006

The traffic information is provided, which based on the volume of traffic, speed, occupancy collected through the currently operating Vehicle Detector System(VDS). In addition to the trend in utilization fold of traffic information is increasing gradually with the applied various fields and users. Missing data in Vehicle detector data means series of data transmitted to controller without specific property. The missing data does not have a data property, so excluded at the whole data Process Hence, increasing ratio of missing data in VDS data inflicts unreliable representation of actual traffic situation. This study presented the imputation process due out which applied the methodologies that utilized adjacent stations reference and historical data utilize about missing data. Applied imputation process methodologies to VDS data or SeoHaeAn/Kyongbu Expressway, currently operation VDS, after processes at missing data ratio of an option. Imputation process held presented to per lane-30seconds-period, and morning/afternoon/daily time scope ranges classified, and analyzed an error of imputed data preparing for actual data. The analysis results, an low error occurred relatively in the results of the imputation process way that utilized a historical data compare with adjacent stations reference methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.258-266
• /
• 2013

We propose adaptive detection algorithm to reduce a false alarm by considering the characteristics of the random noise on the detection system based on a seismic sensor. The proposed algorithm consists of the first step detection using kernel function and the second step detection using detection classes. Kernel function of the first step detection is obtained from the threshold of the Neyman-Pearon decision criterion using the probability density functions varied along the noise from the measured signal. The second step detector consists of 4 step detection class by calculating the occupancy time of the footstep using the first detected samples. In order to verify performance of the proposed algorithm, the detection of the footsteps using measured signal of targets (walking and running) are performed experimentally. The detection results are compared with a fixed threshold detector. The first step detection result has the high detection performance of 95% up to 10m area. Also, the false alarm probability is decreased from 40% to 20% when it is compared with the fixed threshold detector. By applying the detection class(second step detector), it is greatly reduced to less than 4%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.89-97
• /
• 2012

In recent years, efficient energy management technologies are required, as environmental problems have emerged worldwide. In response to this, smart home services focused on efficient energy management technology seems to be emerging. And the integration of technology of user-oriented real-time energy monitoring and control systems is required. In this paper, we present a location-based green home service using smart phones for efficient energy management in a house. We design a green home network system to apply the green home service, and implement an integrated gateway system which connects and controls each appliance in a house. We develop appliance control services and indoor location services on smart phones, and determine whether user's occupancy of each room by measuring the location according to the variation of signal strength. In order to evaluate the performance of the energy savings, we have set up the scenarios of energy usage pattern and have compared the energy variation resulting from the application of the indoor location services with smart meters. A comparison of energy usage demonstrated that the energy saving of a house with the proposed location-based green home service was down up to 30%.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.370-375
• /
• 2008

When customer makes a phone call to get the necessary information, ARS (Automatic Response System) will provide them without the limitation of time and place. Therefore, the application field of ARS (Automatic Response System) has been expanded and also occupancy rates arepretty high. However, compared with the importance of ARS, there is little study regarding the closest information structure of the actual users. Therefore, this research is about the ARS information structure of Gimhea BIS (Bus Information System), and the point of this research is to analyze the problem of the ARS information structure so we can suggest an idea to improve it. As the methods of study, drawing the workflow of ARS, conducting user observation, comparing with cases another region and analysis them. As a result, by and large there was error in the structure of information so, system reformation was required. Now that, we suggested two ideas for the improvement and we conducted usability test under that problem. Usability test was conducted by Lab test with interview. As a result, we could understand merits and demerits of two ideas for improvement, and we completed final improvement to highlight only merits of two ideas for improvement. This study will be utilized as the base material to improve ARS of Gimhea BIS.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.45-60
• /
• 2003

A median is a safety feature most commonly used to separate opposing traffic on a divided highway. In designing highways, the selection and installation of a median can be a critical part from a safety viewpoint because road crossing accidents are definitely more serious than other accidents. In regard to the important function of the median. the proper countermeasure ought to have been provided and thorough study should have been carried out. In this paper, traffic accident data are analyzed to examine the accident reduction effect of the median, which are gathered from all over 4-lane national roads in Korea. The traffic accident data were categorized into two groups by the existence of a median. For more effective analysis, the data have been classified by accident type, severity. and occurrence time. To compare the effectiveness of median installation, not only the accident frequency but also the accident severity, EPDO. and the occupancy rate of specific accidents have been used as a mode of effectiveness. The analysis of the effectiveness of medians shows that both the accident frequency and the accident severity could decrease by providing a median. Also the section where a median was supplied showed the improvement of overall safety through fewer serious and fatal crashes as well as fewer head-on crashes. Therefore, conclusions can be drawn from results of this study that the median installation is an important means to increase the safety of over 4-lane national roads. This study is expected to provide the reasonability of the median installation by identifying the reduction of traffic accident after the median installation and to play a major role in selecting sections where the median is to be offered.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.191-206
• /
• 2016

Pedestrian performance measurement has generally used the average values of pedestrian volumes and speeds from a sample, although each individual's pedestrian behavior of the sample is mainly affected by his/her socio-economic and physical characteristics. In particular, if such individual characteristics of the sample have wide variations, the average values are hard to be representative. In this respect, this study found that a platoon of pedestrians had a major effect on their pedestrian flows on sidewalks. The more platoons was mixed on pedestrian roads, the lower pedestrian flow rate was. The indexes such as a pedestrian flow rate and an occupancy space are typically calculated by pedestrian volumes in a given period of time regardless of the existence of a platoon. However, it is plausible that a pedestrian speed and a level of pedestrian congestion can be different under the equal amount of pedestrian volumes. Therefore, this study suggested criteria for determining level of service for pedestrian considering platoon effects and confirmed that two places had different pedestrian LOSs because of the platoon effects, even if they showed the same pedestrian flow rate.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.35-41
• /
• 2016

Port congestion has been recognized as one of the critical factors for port service competitiveness and port selection criteria. However, congestion ratio, the congestion index currently used by Korea, plays a very limited role in shipping companies' and shippers' selection of port and port authorities' decision making regarding port management and development. This is mainly due to the fact that this ratio is only calculated as the ratio of the number of vessels by each port. Therefore, this study aims to measure service level related to vessel entry and departure in Korea ports by evaluating waiting ratio(WR) according to terminals and vessel types. The results demonstrate that the waiting ratio of containerships and non-containerships is less than 4% and 15% respectively, which satisfies the reasonable level suggested by the UNCTAD and OECD. Port of Pohang is revealed to have the highest WR of 57% and among the terminals, No. 1 Terminal of the Shinhang area has the highest WR. In terms of ship types, WR of Steel Product Carrier is highest, followed by General Cargo Ship and Bulk Carrier at the Pohang Shinhang area. In addition to WR, berth occupancy ratio as well as the number and time of waiting vessels can be utilized to evaluate service level by ports and terminals from port users' perspective, and furthermore, to improve the port management and development policy for port managers or authorities.