• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.116-128
• /
• 2010

Modeling of the three phase electric arc furnace and its voltage flicker mitigation are the purposes of this paper. For modeling of the electric arc furnace, at first, the arc is modeled by using current-voltage characteristic of a real arc. Then, the arc random characteristic has been taken into account by modulating the ac voltage via a band limited white noise. The electric arc furnace compensation with static VAr compensator, Thyristor Controlled Reactor combined with a Fixed Capacitor bank (TCR/FC), is discussed for closed loop control of the compensator. Instantaneous flicker sensation curves, before and after accomplishing compensation, are measured based on IEC standard. A new method for controlling TCR/FC compensator is proposed. This method is based on applying a predictive approach with closed loop control of the TCR/FC. In this method, by using the previous samples of the load reactive power, the future values of the load reactive power are predicted in order to consider the time delay in the compensator control. Also, in closed loop control, two different approaches are considered. The former is based on voltage regulation at the point of common coupling (PCC) and the later is based on enhancement of power factor at PCC. Finally, in order to show the effectiveness of the proposed methodology, the simulation results are provided.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.137-154
• /
• 2019

This study analysed the center control emergency vehicle preemption[EVP] test result on the 1.782 km section around Gangbuk Fire Station. The pros and cons between center control and site control EVP was compared through the review of existing research. The test site was selected based on the higher link speed for choosing low congested area and 4 to 6 lane road. EVP operates green extension under the estimated arrival time to each intersection. This study is about EVP system field application and its evaluation by analyzing EVP operation result with the emergency vehicle's trace, GPS data. The impact on the surrounding traffic was analysed in delay from the queue length survey. Analysis showed the decrease in averge travel time 41.81%, but the increase in delay of surrounding traffic slightly. It is expected that EVP can be applied to the expanded area by researching EVP compensation scheme.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.196-204
• /
• 1996

The simplified dynamic models of the timer assembly in the diesel engine fuel injection system were developed. The first order system with time delay was assumed and the various parameters in this model were obtained by experimental data. These simplified dynamic models were used for the development of control algorithm of the injection timing control system. The PI control algorithm was modified to include the anti-windup property and disturbance compensation. This modified PI control algorithm was used for the control of the injection timing. Improved control accuracy and reduced control efforts were observed.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.25-31
• /
• 1999

This paper proposes a new wide-band beamforming algorithm which has Gaussian weighting at nested linear array for acoustic measurement. The beamforming is performed one-shot by using all sensors simultaneously, not octave-by-octave. Gaussian weighting of frequency-dependent function is applied to each sensor before time-delay compensation so as to control the frequency receiving band of each sensor. As the results of the simulations, it is confirmed that the proposed algorithm can form the one-shot beams having uniform directivity index and also it can be applied to the broad-band acoustic measurement.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.5
• /
• pp.30-41
• /
• 1999

본 논문에서는 연속시간과 이산시간에서 파라미터 불확실성과 시간지연을 가지는 비선형시스템에 대한 퍼지 견실 H∞ 제어기 설계방법을 제시한다. 비선형시스템은 변형한 T-S(Takagi- Sugeno) 퍼지모델을 사용하여 나타내고, 퍼지제어는 PDC(parallel distributed compensation) 개념을 이용한다. 또한 Lyapunov 접근방법을 이용하여 불확실성, 외란과 시간지연을 가지는 변형한 T-S 퍼지모델의 H∞ 노옴 한계를 가지는 자승적 안정성을 언급하고, LMI(linear matrix inequality) 기법을 이용하여 퍼지 견실 H∞ 제어기의 존재 조건과 제어기 설계방법을 제시한다. 그러므로 제시한 기법은 구하여진 충분조건을 만족하는 해를 찾음과 동시에 제어기를 한번에 설계할 수 있다. 마지막으로 예제를 통하여 제시한 방법의 타당성을 확인한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.161-165
• /
• 2001

최근 인터넷은 전 세계적으로 대중화되고 다양한 분야에서 많이 응용되고 있다. 특히 인터넷을 이용한 Telerobot 시스템의 연구가 활발히 진행되면서, 인터넷상에서의 네트워크 상태나 대역폭에 따른 시간지연 문제가 중요한 이슈가 되고 있다. 이는 조작자가 의도하는 데로 이동로봇을 제어하기 위해 반드시 해결되어야할 문제이다. 따라서 본 논문에서는 원격지의 조작자가 지시하는 데로의 원활한 주행을 위하여 이동로봇에 전송되는 명령에 신간정보를 함께 보냄으로써, 이를 수신한 이동로봇이 지연시간을 계산하여 시간지연에 따른 경로오차를 보상하거나, 이전의 경로를 이용하여 앞으로의 경로를 예측함으로써 이동로봇이 적절한 경로를 주행할 수 있도록 함을 목적으로 한다.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.790-799
• /
• 2018

This paper proposes a single-phase unified power quality conditioner (S-UPQC) for maintaining power quality issues in a microgrid. The S-UPQC can compensate the voltage and current harmonics, voltage sag, and swell as a dynamic voltage restorer (DVR), regardless of variations in the grid frequency. Odd harmonics are treated as even-order harmonics in a rotating frame to implement the harmonic compensators with only one repetitive controller (RC) without any harmonic extractor. The dynamic performance is improved and the delay time is reduced in the RC. The S-UPQC control scheme is designed to maintain accurate and stable operation under deviations of the grid frequency by using the Lagrange interpolation-based finite-impulse-response (LIFIR) filter approximation method. The proposed control schemes were validated through a simulation and experiment.

• Smart Structures and Systems
• /
• v.12 no.2
• /
• pp.157-179
• /
• 2013

We present an approach, based on the state dependent Riccati equation, for designing non-collocated seismic response control strategies for buildings accounting for physical constraints, with particular attention to force saturation. We consider both cases of active control using general actuators and semi-active control using magnetorheological dampers. The formulation includes multi control devices, acceleration feedback and time delay compensation. In the active case, the proposed approach is a generalization of the classic linear quadratic regulator, while, in the semi-active case, it represents a novel generalization of the well-established modified clipped optimal approach. As discussed in the paper, the main advantage of the proposed approach with respect to existing strategies is that it allows to naturally handle a broad class of non-linearities as well as different types of control constraints, not limited to force saturation but also including, for instance, displacement limitations. Numerical results on a typical building benchmark problem demonstrate that these additional features are achieved with essentially the same control effectiveness of existing saturation control strategies.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.409-418
• /
• 2013

This paper presents an enhanced control strategy which consists of a proportional-integral controller and a repetitive controller (RC) for improving the voltage performance of distributed generation (DG) under nonlinear load conditions. The proposed voltage controller is able to maintain a sinusoidal voltage at the point of common coupling (PCC) of the DG regardless of the harmonic voltage drop in the system impedance due to nonlinear load currents. In addition, by employing the delay time of the RC at one-sixth of the fundamental period, the proposed RC can overcome the slow response drawback of the traditional PI-RC. The proposed control strategy is analyzed and the design of the RC is presented in detail. The feasibility of the proposed control strategy is verified through simulation and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.1-12
• /
• 1991

In this paper the design and construction of discrete model following servo dontroller on the position control system is proposed. The operational time delay of the plant in the controller which is proposed, is considered and the system which is added by the integral compensation in first order difference equation is constructed. By applying the optimal regulator method to the system, the method which find the optimal state feedback gain is developed theoretically. The output of a model which is correspond to a DC Servo motor follow quickly the speed response of a DC Servo motor and the velocity error in ansteady-state is reduced in zero and the position response is controlled correctly, the performance of the controller is contoller is confirmed by Computer Simulation.