• Tuberculosis and Respiratory Diseases
• /
• v.47 no.6
• /
• pp.757-767
• /
• 1999

Background: Diagnosis by smear and/or cultures of the Mycobacterium tuberculosis from body fluid or biopsy specimen is "Gold standard". However the sensitivity of the direct microscopy is relatively low and culture of mycobacteria is time consuming. Despite an explosion in the techniques of rapid identification of mycobacteria by molecular genetic means, it is laborious and expensive and then rapid, inexpensive serodiagnosis is interested in diagnosis of tuberculosis. But sensitivity and specificity of known serologic antigen is not full sufficient level and then new antigen develop and combination cocktails of new developed antigens by ELISA are needed. Method: To compare the efficacy of different mycobacterial specific antigen and to assess the applicability of the combination of several different antigens in the diagnosis of tuberculosis, five ELISA tests derived 14KDa, 16KDa, 19KDa, 23KDa, 38KDa were evaluated in 57 active pulmonary patient and 24 inactive post-therapy follow up patient and 48 normal control. Results: The optical densities of ELISA test with 14KDa, 16KDa, 19KDa, 23KDa, 38KDa were significantly higher in active tuberculosis cases than in normal control(P<0.001, P<0.001, P<0.027, P<0.001, P<0.001) and those with 16KDa, 38KDa were significant higher in active tuberculosis cases than in inactive post-therapy follow up cases(P<0.01. P<0.001) and those of 14KDa, 16KDa, 23KDa, 38KDa were significant higher in inactive post-therapy follow up cases than in normal control(P<0.008. P<0.01. P<0.006. P<0.001). The sensitivity of 14KDa, 16KDa, 19KDa, 23KDa, 38KDa in active pulmonary patient cases was 42.1%, 43.9%, 15.8%, 28.0%, 70.2%, respectively and the specificity of 14KDa, 16KDa, 19KDa, 23KDa, 38KDa in active pulmonary patient cases was 95.8%, 95.8%, 91.7%, 89.6%, 93.8%, respectively. The sensitivity and specificity of combination 38KDa with 16KDa was 87% and 93.7%. Conclusion: The sensitivity and specificity of new antigens for serodiagnosis of the tuberculosis still remains limited at around 70%, which makes its a poor diagnostic tool for disease confirmation. A combination of cocktail antigens provided by cut-off value adjustment for serodiagnosis of tuberculosis some improved diagnostic yield than single antigen serologic test.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.297-311
• /
• 2011

This paper deals with a strategic investment decision model for improving investment profit in shipping industry. Despite the quantitative expansion of Korean shipping business, many shipping firms have suffered financial difficulties due to financial and operating risks that result from the characteristics of capital-intensive business as well as of volatility of shipping markets. As a result, managers in charge of making an investment decision, particularly in tramper business sector, are required to take both financial and operating risk factors into consideration. Put it differently, managers are strongly recommended to avoid these risks by ship asset play; buy-low and sell-high, which results in considerable capital gain and cost reduction. In addition, managers in shipping industry are also recommended to consider the ship chartering investment alternative when the freight markets show extreme volatility as the case of 2008 triggered by sub-prime mortgage financial crisis in USA. For example, the BDI suffered plunging down from 1000 in 2008 to 100 in 2010. Consequently, the 4th largest shipping company in Korea, DAEHAN Shipping Co., has collapsed primarily due to excessive tonnage expansion during the peak time of bulk market. In sum, the strategic investment decision model, suggested in this paper, is designed to include such factors as capital gain by asset play, timely chartering for alternative shipping service, and optimization of operating profit by tonnage adjustment in accordance with change in the shipping markets concerned.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.233-245
• /
• 2011

With the use of computed tomography (CT), computer-aided design/computer-assisted machining (CAD/CAM) technology and internet, the implant dentistry has been evolved. The surgical templates made by CAD/CAM technology and precise installation of implants, permit restorations to be inserted immediately after implants have been placed. The advantages of CAD/CAM guided implant procedures are flapless, minimally invasive surgery and shorter surgery time. With this technique, less postoperative morbidity and delivery of prosthesis for immediate function would be possible. A patient with an edentulous maxilla and mandible received 7 implants in mandible using CAD/CAM surgical templates. Prefabricated provisional fixed prostheses were connected immediately after implant installation. Provisional prostheses were evaluated for aesthetics and function during 6 months. Definitive prostheses were fabricated. At 6 months recall appointment, patient's occlusion was slightly changed. To prevent additional adverse effect, regular check-up and occlusal adjustment would be needed.

• Journal of Gifted/Talented Education
• /
• v.25 no.1
• /
• pp.77-93
• /
• 2015

The purpose of this study was to explore the problem solving strategy for Goldberg machine tasks of the gifted students in elementary science depending on the cognitive style(tendency to field-dependent and field independent). It was aimed to provide suggestions for the features and differences of the problem solving strategies of the gifted students in elementary science according to their cognitive styles. A total of 16 students, from the gifted class of P elementary school in Hwaseong were sampled for the research, cognitive styles Test was conducted to divide the students in teams, and the teams were classified according to cognitive style tendencies to five groups of field-dependent group, weak field-dependent group, mixed group, weak field-independent group and field-independent group. The Goldberg device task given was to make a Goldberg device within the angle framework of (Figure) 1, for a bead to start from the starting point and to reach the final point the last. The results are as follows: First, regarding the plan for producing the device, the stronger the field-independent tendency, they established more specific strategy-reflected plan; the stronger the field-dependent tendency, they established less specific strategy-reflected plan. Second, all cognitive style groups took a limited period of time into consideration, to fabricate the devices for the ball to arrive the last using a fine adjustment rather than many devices. Third, the field-independent group used a lot of logical reasoning; the field-dependent group used a lot of intuitive thinking. Fourth, the field independent group properly utilized strategies such as cooperation and role allocation; the field-dependent group tried to solve the task personally rather than cooperatively with poor role allocation. Fifth, the intermediate mixed group solved the problem better than the inclined groups such as field-dependent or field-independent groups.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1407-1418
• /
• 2014

Korean youth spend tremendous time in school for preparing for college admissions. Their academic achievement and overall satisfaction with their lives are affected by how well they adapt to life in school. Successful adaptation to school is important enough to affect a student's future social life. One of the factors that affect adaptation to school is the psychological condition of adolescent anxiety. Anxiety is one of the common mental disorders that appear in people who are not familiar with new environments. Anxiety is known to be related to behavioral problems, and problems with psychological and emotional adaptation. This condition is dramatically increased in adolescents.Parental conflict in particular is known to be a major factor in affecting youth anxiety. As parental conflict became more severe, children felt more negative emotions such as anger, sadness and worry. Moreover, when a child's issue caused the parental conflict, there were more side effects in the emotional condition of the child. This study shows how parental conflict affects a child's anxiety and a child's school life.This problem is analyzed through structural equation modeling.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.953-960
• /
• 2019

The Miller cycle is a diesel engine that has been developed in recent years that it can reduce NOx and improve fuel consumption by reducing the compression ratio through intake valve closing (IVC) time control. The Miller cycle can be divided into the early Miller method of closing the intake valve before the bottom dead center (BDC) and the late Miller method of closing the intake valve after the BDC. At low speeds, the late Miller method is advantageous as it can increase the volumetric efficiency; while at medium and high speeds, the early Miller method is advantageous because of the high internal temperature reduction effect due to the expansion of the intake air during the piston lowering from IVC to BDC. Therefore, in consideration of the ef ects of the early and late Miller methods, it is necessary to adopt the most suitable Miller method for the operating conditions. In this study, a two-stage turbo charge system was applied to four-stroke engines and the process of enhancing the Miller effect through a reduction of the intake and exhaust valve overlap as well as the valve change adjustment mechanism were considered. As a result, the ef ects of fuel consumption and Tmax reduction were confirmed by adopting the Miller cycle with a two-stage supercharge, a reduction of valve overlap, and an increase of suction valve lift.

• Journal of the Korean Institute of Rural Architecture
• /
• v.1 no.1
• /
• pp.3-14
• /
• 1999

It is a important problem that the adjustment of a rural settlementas a unit of rural community, and many number of researcher tackled its. The aim of this paper is to verificate the process of rural con-struction, that is applied the regional resources, and to introduce the situation of attending inhabitants, and their employments as a results of this planning. We chose Odaira hamlets in Oomama town, it is located in Gunma prefecture as an object of this study. Odaira is a small village in the mauntain, and it is composed only 135 families. Odaira is an underpopulated hamlet. It is engaged no lively farming and forestry. Most of inhabitants are commuting to the cities around here. Inhabitants of Odaira who are conscious of the conditions of declining hamlet organized a group to improve it. This group have investigated all around the hamlet as a system of workshop. And they found the resources for sight-seeing, crops as the regional products, and other resources for rural planning under three keywords ; resources for the sight-seeing, the rigional products, and theimprovement of environments. In many resources, most important thing was the existens of a stalactite cave come down as a legend from old time. Local government of Oomama town and the inhabitants tried to explorate of stalactite cave and succesed to excavate it. They have constructed two facilities for management, parkaround the stalactite cave and these have been a new place of work for inhabitants. Arrangement of the rural constructions developed to other items schemed acording to the master plan, like as a camping ground, bungalows, a wet botanical garden, and a park beside a river. These also produced the new places of work for 54 people as a result of this rural planning. The most of them were the aged peoples and the women of farmer. The highest age was 83 years old, he is working at the camping ground. In the employment system at Odaira, people who desire to work and desire to employ both registrate to a commission of management of Odaira, and this commission arrange them in case of needs.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.1-8
• /
• 2010

Association rule mining techniques enable us to acquire knowledge concerning sales patterns among individual items from voluminous transactional data. Certainly, one of the major purposes of association rule mining is utilizing the acquired knowledge to provide marketing strategies such as catalogue design, cross-selling and shop allocation. However, this requires too much time and high cost to only extract the actionable and profitable knowledge from tremendous numbers of discovered patterns. In currently available literature, a number of interest measures have been devised to accelerate and systematize the process of pattern evaluation. Unfortunately, most of such measures, including support and confidence, are prone to yielding impractical results because they are calculated only from the sales frequencies of items. For instance, traditional measures cannot differentiate between the purchases in a small basket and those in a large shopping cart. Therefore, some adjustment should be made to the size of market baskets because there is a strong possibility that mutually irrelevant items could appear together in a large shopping cart. Contrary to the previous approaches, we attempted to consider market basket's size in calculating interest measures. Because the devised measure assigns different weights to individual purchases according to their basket sizes, we expect that the measure can minimize distortion of results caused by accidental patterns. Additionally, we performed intensive computer simulations under various environments, and we performed real case analyses to analyze the correctness and consistency of the devised measure.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.983-991
• /
• 2019

This study aims to analyze movies which contain various stories according to the size of their shots. To achieve this, it is needed to classify dataset according to the shot size, such as extreme close-up shots, close-up shots, medium shots, full shots, and long shots. However, a typical video storytelling is mainly composed of close-up shots, medium shots, full shots, and long shots, it is not an easy task to construct an appropriate dataset for extreme close-up shots. To solve this, we propose an image cropping method based on the region of interest (ROI) detection. In this paper, we use the face detection and saliency detection to estimate the ROI. By cropping the ROI of close-up images, we generate extreme close-up images. The dataset which is enriched by proposed method is utilized to construct a model for classifying shots based on its size. The study can help to analyze the emotional changes of characters in video stories and to predict how the composition of the story changes over time. If AI is used more actively in the future in entertainment fields, it is expected to affect the automatic adjustment and creation of characters, dialogue, and image editing.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.225-236
• /
• 2011

Various applications of LBS (Location Based Services) are being developed to provide the customized service depending on user's location with progress of wireless communication technology and miniaturization of personalized device. To effectively process an amount of vehicles' location data, LBS requires the techniques such as vehicle observation, data communication, data insertion and search, and user query processing. In this paper, we propose the historical location index, GIP-FB (Group Insertion tree with Flexible Buffer Node) and the flexible buffer node technique to adjust the cost of data insertion and search. the designed GIP+ based index employs the buffer node and the projection storage to cut the cost of insertion and search. Besides, it adjusts the cost of insertion and search by changing the number of line segments of the buffer node with user defined time interval. In the experiment, the buffer node size influences the performance of GIP-FB by changing the number of non-leaf node of the index. the proposed flexible buffer node is used to adjust the performance of the historical location index depending on the applications of LBS.