• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.833-834
• /
• 2015

For the design of a permanent magnet linear synchronous machine with slotless stator structure, this paper addresses a three-dimensional (3D) analytical approach for consideration of end effects. In contrast, analytical method can derive solutions in substantially shorter times with high reliability. Therefore, we derive accurate analytical solutions to dramatically reduce the time need for analysis. In addition, we performed characteristic analysis of permanent magnet linear synchronous machine (PMSLM) according to PM overhang length.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2523-2532
• /
• 1994

In this paper, active noise control is performed in a duct system using the periodic pulse train which corresponds to the periodic component of noise source as a reference signal. Control algorithm applied in this study is possible to eliminate the acoustic feedback which occurs in the conventional filtered-x and filtered-u LMS algorithm by using electrical reference signal and has the fast adaptation speed with low filter orders by using synchronous sampling method is discussed via computer simulations and experiments of case studies such as frequency modulation, amplitude modulation and frequency differency between source signal and reference signal.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.109-114
• /
• 2002

This paper analysis the transient performance of the modified excitation system using 4-quadrant chopper for a synchronous machine connected to HVDC system. Conventionally, capacitors are used to supply reactive power requirement at a strong converter bus. And the installation of a synchronous machine is essential in an isolated weak network to re-start after a shutdown of HVDC and to increase the system strength. However, a conventional static excitation system has some problems which are harmonic instability and the system stress due to overvoltage. To reduce these problems, the new excitation system, which has 4-quadrant chopper, is proposed. As the proposed system provides the capability to allow reverse current and isolate between AC network and excitation power, problems of overvoltage and harmonic instability can be solved. The investigation is performed and confirmed by the time domain digital simulation using PSCAD/EMTDC program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.763-764
• /
• 2006

In this paper, optimized model was designed for the starting characteristic of the Single-Phase Line-Start Permanent Magnet Synchronous Motor by using the Design of Experiment. A field pole angle, thickness and distance from center axis of permanent magnet were selected as design factor. We executed the transient state characteristic analysis of 8 test models. The transient state characteristic analysis was executed by using the 2 dimensional Finite Element Method and the Time Difference Method. We checked the fact that the selected design factor affected starting characteristic of the Line-Start Permanent Magnet Synchronous Motor. Depend on this result we found the optimized design point by using the response optimization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.241-243
• /
• 1999

This paper describes a series of experiments investigating the operational characteristics of high-Tc superconducting synchronous motor of five to six hundred watts capacity. In this experiment, ac 220V stator phase voltage and DC 4A excitation current are used, and the synchronous speed runs at 1800rpm. Hall Sensors are installed on the pole face and at the side of the Ag/Bi-2223 high-Tc superconducting tape in order to analyze the effect of the time-varying magnetic field on the motor performance when the load changes its value. The experimental observations are compared with the theoretical predictions.

• 한국통신학회논문지
• /
• 제12권2호
• /
• pp.115-123
• /
• 1987

종래의 스펙트럼 확산 통신방식은 비동기의 다중접속이 가능하다는 특징을 가지지만, 챈널간 간섭이 존재하기 때문에 동시 통신 가능한 챈널 수가 TDM 에 비해 작아, 주파수 이용 효율이 나쁘다. 이것을 개선하기 위해 본 논문에서는 새로운 변형 M계열을 확산 부호로 하는 동기식 스펙트럼 확산 다중 통신 방식을 제안한다. 시스템 구성후 실험결과 M계열 사용시보다 변형 M계열 사용시 챈널 간 간섭이 적음을 확인하였고 전송 대역폭이 클수록 수신파형이 양호함도 확인하였다.

• ETRI Journal
• /
• 제37권4호
• /
• pp.657-666
• /
• 2015

We propose a two-stage resource allocation algorithm for the high link utilization of an orthogonal frequency-division multiplexing passive optical network (OFDM-PON). An OFDM-PON is assumed to use a synchronous frame structure in supporting service differentiation. In distributing resources, the proposed algorithm first allocates a time window for each optical network unit (ONU), and then it arranges a subchannel, which is a group of subcarriers. This algorithm needs to satisfy two constraints. First, computations for the resource allocation should be done using a frame unit. Second, an ONU has to use a single subchannel to send upstream data for multiple services within a frame duration. We show through a computer simulation that the proposed algorithm improves the link utilization.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1322-1331
• /
• 2000

In this paper, we compare the performance of noncoherent DS-CDMA system where orthogonal code is used for identifying the user to reduce multiple access interference or for M-ary orthogonal signaling to improve the performance of demodulation. The effects of M-ary orthogonal signaling on the noncoherent demodulation is investigated and compared with one of coherent demodulation. The analysis results show that M-ary orthogonal signaling gives better performance than quasi-synchronous orthogonal scheme for a moderate number of users when the processing gain is 128 over AWGN channel. In addition, when the number of user is 41, M=64 orthogonal signaling has a similar performance to the quasi-synchronous orthogonal scheme at the BER of 10-2 when the time misalignment between channels is within 1/2 chip and M=256 orthogonal signaling always outperforms the quasi-synchronous orthogonal scheme. Start after striking space key 2 times.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 2002

To show a retina shape and thickness on the computer monitor, a laser has been used in Scanning Laser Ophthalmoscope(SLO) equipment using the travelling difference. This method requires exact synchronous control of laser travelling in optic system to show a clear 3-dimensional image of retina. To obtain this image, this exact synchronism is very important for making the perfect plane scanning. In this study, a synchronous control of the galvanometer using deadbeat torque observer to make 3-dimensional retina image is presented. For the more, a very simple mathematical model of the galvanometer is approved by experimental result.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.477-483
• /
• 2020

This study proposes a DQ synchronous reference frame model of a series-parallel tuned inductive power transfer (SP-IPT) system. The wireless power transmission system experiences control difficulty because the transmitter-side controller cannot directly measure the receiver-side load voltages and currents. Therefore, a control-oriented circuit model that shows the dynamics of the IPT system is required to achieve a well-behaved controller. In this study, an equivalent circuit model of the SP-IPT system in a synchronously rotating reference frame is proposed using the single-phase DQ transformation technique. The proposed circuit model is helpful in modeling the dynamics of the voltages and currents of the transmitter- and receiver-side resonant tanks and loads. The proposed circuit model is evaluated using frequency- and time-domain simulation results.