• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.161-169
• /
• 2018

This study presents a time synchronization system in decentralized structure by using the blockchain, a core technology of Bitcoin introduced by Satoshi Nakamoto in 2008. In this study, Getting away from existing time synchronization system in centralized structure, A blockchain network has completely decentralized structure using public blockchain. In decentralized structure, Only certain peers among the peers that participate in a blockchain network access the NTP server. Therefore, others can synchronize time without having to go to public network. Furthermore if appropriate time synchronization cycles are established for each peer, time synchronization can be maintained even when connection to public network is completely lost. A time synchronization system in this study has advantages of p2p system and can be also guaranteed reliability and stability because it used digital signature, merkle tree, consensus algorithm which are core characteristics of block chains.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.242-247
• /
• 2009

The ability of time reversal techniques to focus ultrasonic beams on the source location is important in many aspects of ultrasonic nondestructive evaluation. In this paper, we investigate the time reversal beam focusing of ultrasonic array sensors on a defect in layered media. Numerical modeling is performed using the commercially available software which employs a time domain finite difference method. Two different time reversal approaches are considered - the through transmission and the pulse-echo. Linear array sensors composed of N elements of line sources are used for signal reception/excitation, time reversal, and reemission in time reversal processes associated with the scattering source of a side-drilled hole located in the second layer of two layer structure. The simulation results demonstrate the time reversal focusing even with multiple reflections from the interface of layered structure. We examine the focusing resolution that is related to the propagation distance, the size of array sensor and the wavelength.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.107-120
• /
• 1992

The purpose of this study was to figure out the wife's employment and family economic structure of urban establishing families. For this purpose 274 establishing families in Seoul and its metropolitan area were interviewed through the standardized questionnares. Finally 264 questionnares were analyzed. The major findings were as follows; 1. The 23.9% of respondents had full-time job and 12.1% had part-time job. The major reason of nonemployment was child-rearing problems. And most ofthem answered that they would have job if child-rearing problems were sloved. 2. In both full-time and part-time job wives, the employment rate of high educational level's wives was high-relatively. 3. Total household monthly income of full-time job women was higher than the ones of part-time job and full-time wives. In total monthly income of full-time job women, the rate of wife's income was about 38%. 4. The costs of clothings, the cost of traffic and the total expenditures of full-time wife's household were higher than the ones of the other households. 5. The saving rate of the urban establishing families was about 27%.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.67-74
• /
• 2015

The heat conduction equation, a type of a Poisson equation which can be applied in various areas of engineering is calculating its value with the iteration method in general. The equation which had difference discretization of the heat conduction equation is the simultaneous equation, and each line has the characteristic of expressing in sparse matrix of the equivalent number of none-zero elements with neighboring grids. In this paper, we propose a data structure for sparse matrix that can calculate the value faster with less memory use calculate the heat conduction equation. To verify whether the proposed data structure efficiently calculates the value compared to the other sparse matrix representations, we apply the representative iteration method, CG (Conjugate Gradient), and presents experiment results of time consumed to get values, calculation time of each step and relevant time consumption ratio, and memory usage amount. The results of this experiment could be used to estimate main elements of calculating the value of the general heat conduction equation, such as time consumed, the memory usage amount.

• Ceramist
• /
• v.23 no.2
• /
• pp.114-131
• /
• 2020

Fracture in the titanium carbonitride-metal composites occurs by crack propagation through the carbonitride grains or in the interfaces. Thus, intrinsic properties of the carbonitride need to be enhanced and the interfaces should be also modified to coherent structure to strengthen the composites. Especially, interfacial structure can be the main factor to determine the mechanical properties of titanium carbonitride-metal composites because the interfaces between carbonitride grains and metallic phase are weak parts due to heterogeneous nature of carbonitride and metallic phase. In this paper, methodologies for improving the interfacial structure of titanium carbonitride-metal composites are suggested. Total area of the interfaces can be reduced using solid solution type carbonitrides as raw materials instead of a mixture of various carbonitrides in the composites. Also, synthesis of titanium carbonitride-metal composite powders and the low-temperature sintering of the composite powders for short time can be the way for formation of coherent interfaces. The sintering of the composite powders for short time at low temperature can reduce the potential of formation of interfaces by dissolution and precipitation of carbonitride in the liquid metal. As a result of formation of coherent boundaries due to low-temperature and short-time sintering, interfaces between titanium carbonitride grains and metallic phase have the favorable structure for the enhanced fracture toughness. It is believed that the low-temperature sintering of solid solution type composite powders for short time can be the way to improve the low toughness of the titanium carbonitride-metal composites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.879-886
• /
• 2006

In this paper, we proposed an advanced authentication structure for reducing the certificate acquisition time which is one of the factors that should be improved in a conventional wireless PKI. A conventional key exchange method simply performs the key exchange setup step based on discrete algebraic subjects. But the mutual-authentication procedure of wireless PKI for reducing authentication time uses an elliptical curve for a key exchange setup step. We simulated and compared the authentication structure proposed by Sufatrio, K. Lam[4] and the our authentication structure in terms of the authentication time. Simulation results show that the proposed method reduces the authentication time comparing to the conventional wireless PKI authentication method.

• Structural Engineering and Mechanics
• /
• v.40 no.3
• /
• pp.431-451
• /
• 2011

Time delay inevitably exists in active control systems, and it may cause the degradation of control efficiency or instability of the systems. So time delay needs to be compensated in control design in order to eliminate its negative effect on control efficiency. Today time delay in linear systems has been more studied and some treating methods had been worked out. However, there are few treating methods for time delay in nonlinear systems. In this paper, an active controller for a nonlinear and hysteretic building structure with time delay is studied. The nonlinear and hysteretic behavior of the system is illustrated by the Bouc-Wen model. By specific transformation and augmentation of state parameters, the motion equation of the system with explicit time delay is transformed into the standard state space representation without any explicit time delay. Then the fourth-order Runge-Kutta method and instantaneous optimal control method are applied to the controller design with time delay. Finally, numerical simulations and comparisons of an eight-story building using the proposed time-delay controller are carried out. Simulation results indicate that the control performance will deteriorate if time delay is not taken into account in the control design. The simulations also prove the proposed time delay controller in this paper can not only effectively compensate time delay to get better control effectiveness, but also work well with both small and large time delay problems.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.107-128
• /
• 2017

Time is an indispensable element in creating a story. This makes comics artists use various time techniques such as prolepsis, summary, ellipsis and flashback to increase immersion in story when they create comics. This is intended to make a study on retrospective structure among various temporal structures. Retrospective structure means progress in different time sequence, and increases immersion by making readers become strained or relaxed. Besides, retrospective structure plays a role of increasing or decreasing the pace of story. The person who systematically put the retrospective structure into shape is $G\acute{e}rard$ Genette. He in his book "Narrative Discourse" classified retrospective structure into three types. These are made up of structure of analepse externes, analepse internes and analepse mixted. This makes a study on retrospective structure in narrative comics based on $G\acute{e}rard$ Genette's retrospective structure. To this end, Kang Full's webtoon was analyzed. The reason to analyze Kang Full's is that this work has storyline where things happening in parental generation is interwined with things in offspring generation, accordingly this is work suitable for studying the retrospective structure. This study is intended to examine whether three retrospective structures suggested by $G\acute{e}rard$ Genette are actually used through an analysis of , and as a result, it is intended to prove the fact that retrospective structure has an effect on immersion in work.

• Smart Structures and Systems
• /
• v.6 no.4
• /
• pp.363-372
• /
• 2010

Accurate peak response estimation of a seismically excited structure with frictional damping system (FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated the peak response of the structure with FDS by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In case that earthquake excitation is defined probabilistically, corresponding response of the structure with FDS becomes to have probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake excitation generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Coefficients of the proposed PDF are obtained by regression of the statistical distribution of the time history responses. Finally, the correlation between the resulting PDFs and statistical response distribution is investigated.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.605-607
• /
• 2011

A Study on the flow-structure characteristics of a 3/2 way pneumatic valve is essential for optimizing the performance of ship engines. It is important for the valve to have desirable safety factor am reduced weight from the safety and economic point of view. In this study, we capture flow-structure characteristics of 3/2 way pneumatic valve. This is optimized based on the proper design criteria. The air at a pressure of 30 bar is the working fluid which is made to fill in the tack in short time. This time is defined as the filling time. The flow and structure analysis is performed for three cases under maximum stress and safety factor. In optimum design, considering the flow-structure characteristics, we model twenty seven cases by using DOE(design of experiments) method Here, analysis for each cases is performed and then metamodels are created We obtain optimized parameters and then analysis is repeated to compare with the initial model. Finally, the feasibility of the optimum design is verified.