CMOS 카메라 영상의 화질을 좌우하는 것은 여러 가지가 있는데 그 중에서 영상 노출시간은 중요한 요소이다. 영상 노출시간이 길게 되면 화면 전체 영상이 밝아지게 되고 노출시간이 짧아지면 전체 영상이 어두워지게 된다. 정지 피사체를 사진 촬영할 경우 자동노출 시스템이 적절한 노출시간을 얻는데 충분한 시간이 주어지기 때문에 실시간성이 요구되지 않는다. 하지만 주행 중인 자동차의 블랙박스 같이 주변 빛 환경이 빠르게 변하게 되면 이에 맞추어서 노출시간도 실시간으로 반응하여 적용되어야 한다. 이를 위해서는 실시간성과 주변 빛 환경에 대하여 강건한 자동노출 시스템이 요구된다. 본 논문에서는 ZYNQ의 로직과 ARM코어를 적용한 임베디드 시스템 설계로 병렬 연산처리 가능한 실시간 제어 시스템을 설계하였고 이를 바탕으로 PID 제어를 통해서 66ms 이내에 원하는 목표 값으로 수렴하고 노이즈에 강건한 실시간 CMOS 자동 노출 시스템을 개발하였다.
The study is to investigate which features are perceived by Social Network Service(SNS) users as the most required one to further boost the usage of service, and to examine the perception of these features of SNS sites varies according to their demographic and service usage characteristics. The study also is to suggest a few of research propositions on the relationships between required features of SNS sites and characteristics of SNS users, based on statistical analyses. To accomplish these research purposes, the study defined characteristics of SNS users including demographic(gender, age) and service usage one(start time of service usage, service usage place), and required features of SNS sites(system, service, information, emotion) based on the literature review of SNS. The results show, based on the statistical analyses using survey questionnaire on Korean and Chinese SNS users, that there are differences in perception of required features of SNS sites among the respondents grouped by age, start time of service usage, service usage place. Finally, the study proposed three research propositions, based on the analysis result, that could be used in SNS related researches in the future.
This study researched the microbial change of quality according to various phases of product flow of Dongtae-Jeon (a pan-fried dish) and rolled egg in packaged meals. In order to carry out the study, the time required, temperature, water activity and microbial quality were measured at various phases of production flow of Dongtae-Jeon and rolled egg in packaged meals, and the effects of these factors on microbial multiplication was analyzed. According to the phases in product flow of Dongtae-Jeon, it was shown that the time required is 12.5hrs and water activity is distributed 0.932-0.980. These conditions were suitable for microbial multiplication. According to the phases in product flow of rolled egg, it was shown that the time required is 3.3hrs. In addition, qualitative analysis of pathogenic microorganisms (Salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus) detected no such microorganisms in any of the samples.
Determination of the required reserve capacity has an important function in operation of power system and it is calculated based on the largest loss of supply. However, conventional method cannot be applied in future power system, because potential grid-connected distributed generator and abnormal temperature cause the large load imbalance. Therefore this paper address new framework for determining the optimal required reserve capacity taking into account the real time load imbalance. At first, we introduce the way of operating reserve resources which are the secondary, tertiary, Direct Load Control (DLC) and Load shedding reserves to make up the load imbalance. Then, the formulated problem can be solved by the Probabilistic Dynamic Programming (PDP) method. In case study, we divide two cases for comparing the cost function between the conventional method and the proposed method.
In this paper, a configuration procedure of a transportation infrastructure system for GNSS based very precise real-time positioning is proposed. This infrastructure system consists of several receiving station, a central station, and communication sub-systems. The required performance, design, implementation and verification of each sub-system are explained respectively. The required performance can be broken down into accuracy, integrity, stability, processing time. The design of the each sub-system is performed in accordance with the required performance and each sub-system is built with regard to the design. Lastly the implemented system is verified in comparison with the required performance.
The 6th International Conference on Construction Engineering and Project Management
/
pp.72-76
/
2015
Capital project benchmarking requires an effective cost normalization process to compare cost performance of projects accomplished in different time and location. Existing cost normalization approaches have been established based on the assumption that all required information for cost normalization is fully identified once a project is completed. Cost normalization, however, is sometimes required to evaluate phase-level outcomes of an ongoing project where the required information is not fully available. This paper aims to provide a cost normalization procedure for phase-based performance assessment. The procedure consists of three normalization steps: currency conversion, location adjustment, and time adjustment considering various scenarios where the required information is not fully identified. This paper also presents how the cost normalization procedure has been applied to the 10-10 Performance Assessment Program, which is a phase-based performance assessment system developed by the Construction Industry Institute (CII). Both researchers and industrial professionals can apply the cost normalization procedure to studies and practices regarding to cost estimation, feasibility analysis, and performance assessment.
The incubation time required for hatching of O. ocellatus were investigated through the processes of egg and embryonic developments by the dissecting microscopic and visual observations. And differences in ecological characteristics of the plankton mode of life or the benthic mode of life according to total numbers of the suckers on each short arm of the hatched juvenile larvae of O. ocellatus were studied by comparisons with other octopodidae species. Compared with the recent a few results reported by other researchers associated with the incubation time required for hatching by female adult mother of O. minor (73-90 days after spawning at $20.9-21.5^{\circ}C$ ranges), in this study, the incubation time required for hatching by female adult mother of O. ocellatus was 56-57 days after spawning at $11.0-20.4^{\circ}C$. Therefore, the incubation time required for hatching by female adult mother varied with Octopodidae species. In this studies, each ovarian egg laid by a female was connected to an egg string attaching to the surface of the wall or bottom of vacunt shell of Rapana venosa. Egg and embryonic developments of this species were studied in the indoor aquaria, in the specific gravity ranging 1.024-1.025. the hatched juvenile of O. ocellatus is 10.3 mm in the mean total length and 4.5 mm in mantle length, and each of its short arms has 18-20 suckers. The just hatched juvenile larvae of O. ocellatus enter the benthic mode of life (benthic larval stage) after hatching. In particular, regarding differences in ecological characteristics of the mode of life according to total numbers of the suckers, O. vulgaris may not need to have many suckers because they enter the planktonic mode of life after hatching, however O. ocellatus may need to have many suckers, because they should adapt to the benthic mode of life. And also the just hatched juvenile larvae of O. minor (bearing many suckers more than O. ocellatus) enter the benthic mode of life (benthic larval stage) after hatching. Therefore, the total number of the suckers on each short arm of the hatched juvenile larvae can be used for determining whether an octopus species has planktonic larval stages or benthic larval stage (benthic mode of life). In particular, The intracohort cannibalism phenomena appeared at the hatched juvenile larval stage because the larval stage of O. ocellatus and O. minor enter into the benthic larval stage in the early stage, unlike entering into the plaktonic larval stage in other Octopus species such as O. vulgaris: at this time, the early hatched larvae fed the late hatched larvae (they are the same species and almost same ages). Therefore, the intracohort cannibalism pheneomena occur in the just hatched juvenile stage of only O. ocellatus and O. minor.
Singgih, Ivan Kristianto;Jin, Xuefeng;Hong, Soondo;Kim, Kap Hwan
Industrial Engineering and Management Systems
/
제15권3호
/
pp.278-288
/
2016
Automation ensures accurate and well-organized container transportation in container terminals. This paper addresses operational issues such as equipment scheduling and the coordination between various pieces of equipment in a rail-based automated container terminal. Containers are relayed using multiple types of equipment from road trucks to a vessel and vice versa. Therefore, handshaking is required during a container transfer between different pieces of equipment. Synchronization between the schedules of all the equipment is important to reduce equipment waiting times and the time required for transporting containers, which results in a short turnaround time for a vessel. This paper proposes an integrated control system with the objective of synchronizing the operations of different types of equipment, provides a list of decisions to be made by the control module of each type of equipment, and shows all the required information transfers between control modules. A scheme for the integrated scheduling of multiple types of equipment is proposed. The decisions made by each control module in a real-time fashion are listed with detailed explanations, and the information transfer between managers in a real-time situation at the proposed terminal is described.
This study was conducted to find the shortest optimum time for taking oral temperature and axillary temperature, which does not affect reliability of body temperature. For this purpose, first, the time at which all the samples are reaching maximum temperature is identified Second, the mean maximum temperature is compared with the mean temperature of each consecutive measurement by T-test to find the time at which no significant changes in temperature occurs along time sequence. Third, optimum temperatures are set at points of -0.2℉, -0.4℉, -0.6℉, -0.8℉, -1.0℉, -1.2℉, -1.4℉, from maximum temperature. A point of time at which 90% of samples reach at optimum temperature is identified and defined as optimum time. The study sample, a total of 164 cases were divided into two groups according to their measured body temperature. The group with body temperature below 37 $^{\circ}C$(A group) and above 37$^{\circ}$1'C (B group) were compared on the time required to reach maximum temperature and optimum temperature. The results are as follow. 1. The time required for total sample to reach maximum temperature was 13 minutes in both groups by oral method, 15 minutes in A group and 13 minutes in B group by axillary method. Time required for 90 % of cases reach maximum temperature by oral method was 10 minutes in both group. By axillary method, 12 minutes in A group. (Ref: table 2) 2. Statistical analysis by means of T-test, the time which does not show a significant change by oral method were 12 minutes in A group and 11 minutes in B group, and by axillary method 14 minutes in A group and 11 minutes in B group. (Ref: table 5, 6.) 3. Where optimum temperature was defined as maximum temperature minus 0.2 ℉, optimum time was found 8 minutes in both groups by oral method, and 11 minutes in A group and 9 minutes in B group by axillary method 4. Where optimum temperature was defined as maximum temperature minus 0.4 ℉, optimum time was found 7 minutes in A group and 6 minutes in B group by oral method, and 9 minutes in A group and 7 minutes in B group by axillary method 5. Where optimum temperature was defined as maximum temperature minus 0.8 ℉, optimum time was found 6 minutes in A group and 6 minutes in B group by axillary method (Ref: table 7, 8, 9, 10) 6. The commonly practiced temperature taking time, 3 minutes in oral method and 5 minutes in axillary method can be accepted as pertinent when physiological variation of body temperature at the mean level of -1, 2 ℉ is accepted. 7. The difference in time required to resister maximum temperature was compared between the group with body temperature below 37$^{\circ}C$ and above 37$^{\circ}$1'C, and found no significant difference in oral mettled and 1 - 4 minute difference in axillary method with shorter time requirement in feverish group.
This study was designed to analyze the dietetic practitioner's job in the over 600-ed hospitals in korea and to assess their labor time spent and staffing need indices. The actual time spent and expected labor time spent on dietitians' activities were investigated and the proper dietic staffing needs in the hospitals was also calculated. A job analysis questionnaires were developed and mailed to 20 hospitals. Completed questionnaires were received form 12 hospitals for a response rate of 60%. The followings are summary of the results. 1. The jobs dietitians at the hospitals were classified into the following 7 areas, direct patient care, indirect patient care, therapeutic patient care, education & counseling, meeting & research, delay & movement, and administration & food services. 2. The actual time spent on dietetic practice was 48.6 hours and expected labor time spent was 99.2 hours, Therefore, the proper time required to conduct classified jobs was 2.1 times higher than the time spent. Especially, the time required for performing clinical nutrition services including direct patient care, indirect patient care, therapeutic patient care was significantly higher than the time needed. 3. The average times required for the direct patient care was 1334.6min, for the indirect patient care was 796.3min, for the therapeutic patient care was 1634.5min, for the education & counseling was 265.2min, for the meeting & research was 366.7min, for the delay & movement was 327.3min, and for the administration & food services was 1170min. The staffing need indices was 12.3. As a conclusion, the standardized job descriptions for the dietitian to carry out their job at the hospital should be established. And the clinical dietitians as nutrition professionals have to be recruited to provide systematically hospitalized patients with medical nutrition therapy at each hospital.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.