• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.96-101
• /
• 2016

Previous literature has been investigated various aspects of accident occurrence and prevention in construction field. However, those studied were limited in that they only focused on the death accident without considering the loss time accident. Based on this, the goal of current study was to investigate the nature of the loss time accident, and compare the results with the death accident. Results showed that 1) the occurrence rate of death accident was significantly higher in the form work, temporary work, and steel frame work; 2) the temporary work showed significantly higher occurrence rate of the loss time accident and the death accident as compared to others; 3) ratio of the loss time accident to the death accident in domestic construction field was 50:1; 4) fall accident showed biggest occurrence rate in both the loss time accident and the death accident; and 5) more that 80% of workers in both the loss time accident and the death accident was between 41 and 65 years old.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.210-214
• /
• 2019

The allowable path-deviation time of aircraft in a free-space optical communication system has been estimated from various trajectories, using different values of aircraft speeds and turn rates. We assumed the existence of a link between the aircraft and a ground base station. First, the transmitter beam's divergence angle was calculated through two different approaches, one based on a simple optical-link equation, and the other based on an attenuation coefficient. From the calculations, the discrepancy between the two approaches was negligible when the link distance was approximately 110 km, and was under 5% when the link distance ranged from 80 to 140 km. Subsequently, the allowable path-deviation time of the aircraft within the tracking-error tolerance of the system was estimated, using different aircraft speeds, turn rates, and link distances. The results indicated that the allowable path-deviation time was primarily determined by the aircraft's speed and turn rate. For example, the allowable path-deviation time was estimated to be ~3.5 s for an aircraft speed of 166.68 km/h, a turn rate of $90^{\circ}/min$, and a link distance of 100 km. Furthermore, for a constant aircraft speed and turn rate, the path-deviation time was observed to be almost unchanged when the link distance ranged from 80 to 140 km.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2022

In the CNC machining process, problems such as lowering of machine operation rate, setting errors, and machining precision occur due to the increase in setting time and preparation time. These machining errors cause delays in delivery and increase in cost due to an increase in the number of mounting and dismounting of the workpiece, an increase in measurement and reprocessing time, and an increase in the finishing time in the assembly process. Therefore, in this study, by automating the setting of the work piece using OMV (On Machine Verification), which is a meteorological measurement system, the preparation time for machining the work piece and the setting accuracy were improved, the rework rate was reduced, and the mold manufacturing process was shortened. Through the advancement, standardzation, and automation of the mold part manufacturing process, we have improved productivity by minimizing low-value-added repetitive tasks. In addition, the measurement time was reduced by more than 50% and the machining measurement rate was improved by more than 20%, eliminating repetitive work for correcting machining defects, and reducing the work preparation time by more than 15% through automatic setting.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2315-2320
• /
• 2006

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for low bit rate video coding. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. In order to reduce the quality fluctuation, we use a sliding window scheme which does not require the pre-analysis process. Therefore, the proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.44-52
• /
• 2005

This paper proposes a neural network prediction model to improve the valid packet transmission rate for the QoS(Quality of Service) of multimedia transmission. The Round Trip Time(RTT) and Packet Loss Rate(PLR) are predicted using a neural network and then the transmission rate is decided based on the predicted RTT and the PLR. The suggested method will improve the transmission rate since it uses the rate control factors corresponding to time of data is being transmitted, while the conventional one uses the transmission rate determined based on the past informations. An experimental set-up has been established using a Linux PC system, and the multimedia data are transmitted using UDP protocol in real time. The valid transmitted packets are about 5% higher than the one in the conventional TCP-Friendly congestion control method when the suggested algorithm was applied.

• Korean Journal of Animal Reproduction
• /
• v.19 no.3
• /
• pp.181-189
• /
• 1995

In this study, methods on fabrication of microtool and setting of micromanipulator were examined and relationship between first polar body extrusion rate and maturation time of follicular oocyte, enulceation rae and repetition of trial, and enucleation rate and maturation period were investigated. The results are as follows: 1. Suitable outside diameter of micropipette tube was 1mm. Holding pipette with less than diameter of oocyte was fitred for manipulation, and zona dissection needle was easily operated when its sharp-point had diameter of about 8 ${\mu}{\textrm}{m}$ and length of 300${\mu}{\textrm}{m}$. The injection pipette with 20~35${\mu}{\textrm}{m}$ outside diameter was adequate for injection of blastomere into perivitelline space. 2. Separation of blastomere was effective when zona pellucida had cut with zonadissection needle and the embryo was pipetted gently with the pipette that had narrower diameter than that of embryo until separation of blastomeres had completed. 3. The extrusion rate of first polar body was 78% during 20~24% hours incubation for maturation. 4. According to repetitions of micromanipulation, the enucleation rate was increased to 85% and the time required for enucleation of a oocyte was shortened to 3 min. 5. The extrusion rate of first polar body and enucleation rate were 82 and 76% respectively, in the group of the oocytes cultured for 22 hours. However in the group cultured for 24 hours, the extrusion rate of first polar body and enucleation rate were 53 and 100% respectively.

• Journal of Korean Physical Therapy Science
• /
• v.6 no.1
• /
• pp.931-942
• /
• 1999

The aim of this research is to grasp the relation between lumbago incidence rate and research hypothesis in the effects of sex life of the middle-aged couples in Taejon area upon lumbago. And so, this writer had questionaired the 400 middle-aged couples in five gus, Taejon megalopolis -Jung-gu, Seo-gu, Dong-gu, Yuseong-gu, and Taedeok-gu - from April 21, 1998 to May 10, 1998. Of them, total 209 question papers were drawn back; male 102, female 107. Analysis of the data is as follows. 1. 145(69.37%) subjects of total 209 had experience in lumbago after their sexual lives. 2. In the number of sex life a week, one or two times of lumbago incidence rate were the most rate as 41.55% and each other had a statistically significant relation (P 0.01). 3. In age and lumbago incidence rate, their thirties was 37.75% and each other had a significant relation (P 0.05). 4. In weight and lumbago incidence rate, the level of $50kg{\sim}60kg$ was highest and each other didn't have a significant relation (P 0.05). 5. In the mean time of sexual life, the period of $11{\sim}20$ minutes was 29.47% and each other had a significant relation (P 0.01). 6. In week time zone of sexual life and lumbago incidence rate, midnight was the highest rate, 36.23% and each other didn't have a significant relation (P 0.05). 7. In the lumbago incidence rate according to bedroom structure of sexual life, a bed was 38.17% and each other had a significant relation (P 0.05). 8. In the lumbago incidence rate according to sexual posture, a normal position showed the highest rate, 46.12% and each other didn't have a significant relation (P 0.05). Putting the abovesaid results together, lumbago has relation to the number of sex life a week, age, the mean time of sexual life, and bedroom structure of sexual life. Therefore, it is thought that it is necessary that middle-aged couples periodically study the educational programs to make an education for lumbago prevention, etc. the key points.

• Corrosion Science and Technology
• /
• v.2 no.4
• /
• pp.183-188
• /
• 2003

Corrosion of carbon and weathering steels were evaluated under 3 environmental exposures in Thailand (urban, rural and marine) for a year. The seasonal study was designed to determine different corrosion mechanisms by 6 months of dry season and 6 months of rainy season in a year. The sheltered exposure racks were used to determine the washing effect of min. At each site, climatic and pollutants analyses were carried out. The present study showed that the difference in corrosion rates of carbon and weathering steels was not so distinguished in both rural (AIT) and urban (TISTR) environments. The corrosion rate of weathering steel was somewhat lower than that of carbon steel and the decreasing tendency of corrosion rate with time was slightly higher for weathering steel than for carbon steel. In marine (Rayong) environment, the corrosion rate was higher and the effect of wet and dry seasons was observed. The corrosion rate in 6 dry months was higher for direct exposure than for sheltered exposure. However, in 6 rainy months. the corrosion rate of sheltered exposure was higher than that of direct exposure. In direct exposure for I year, that is, the first 6 dry months and the next 6 rainy months, the corrosion rate decreased with time. but in sheltered exposure, the corrosion rate did not decrease with time. instead, increased in the next 6 rainy months. This indicated that the protect ive layer formed in the first 6 dry months could be destroyed by high deposition of chloride to r sheltered exposure in the next 6 rainy months; whereas the rust layer for direct exposure could be kept sound due to washing effect in rainy season, even though the deposition rate of chloride was almost the same for direct and sheltered exposures. In marine environment, the weathering steel showed higher corrosion resistance than carbon steel but its corrosion rate was higher than those in other environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1092-1100
• /
• 2006

In this paper, we propose a full rate quasi-orthogonal space-time-frequency block coded orthogonal frequency division multiplexing(QOSTF-OFDM) that can achieve full symbol rate with four transmit antennas. Sincr: the proposed QOSTF-OFDM can not achieve full diversity, we use diversity advantage collection with zero forcing (DAC-ZF) decoder to compensate the diversity loss at receive side. At the same frequency efficiency, compared with linear orthogonal space-time codes which can not achieve full rate with four transmit antennas over complex constellations, low level modulation can be employed by proposed scheme due to its full rate, i.e., modulation advantage can be achieved. Due to modulation advantage and collected diversify advantage, the proposed scheme exhibits better BER performance than other orthogonal schemes.