• Journal of the Ergonomics Society of Korea
• /
• v.20 no.1
• /
• pp.1-13
• /
• 2001

Conventionally the subjective assessment for measuring the human sensibility is always performed after an experiment or a stimulus is terminated. This aftermath method can not. exactly, reflect the human sensibility which is produced at the moment of the presentation of the stimulus. In the present study, a new real-time subjective assessment system is developed. The system is composed of two parts: the sensibility input part and the sensibility evaluation part. The sensibility input part gets the values, which are recorded on the input board using pen-mouse, from the evaluation of each subject on his/her own subjective sensibility for the stimulus. The sensibility evaluation part displays the level of the pleasantness and arousal on one and two dimension in real time. An experiment on the design of the input board that any subject can easily and exactly evaluates one's own sensibility is also included in this study. The system can be used for evaluating the human subjective sensibility in real time, and, also, can be applied to other subjective assessment tests that require real time evaluation.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2008

IPTV Content delivery systems over wired networks confront scalability problems due to their high network bandwidth requirement for real-time services. Especially, VoD service provides Trick Mode features such as pause, fast forward and similar operations. However, Trick Mode services are delivered by the method of unicast only for controlling of the stream. With a point of views, this paper propose a new real-time multimedia streaming architecture over IP Networks, which tries to achieve bandwidth efficiency and supporting for mass clients better than traditional unicast services. The proposed methods divide the Transport Stream into a series of segments. After that, this divided partial Transport Stream makes multicast streaming periodically. Meanwhile Set-top Box of a client makes a rearrangement orderly by using Presentation Time Stamp field from the served Transport Stream packets. While the current Transport Stream segment is playing, it should be guaranteed that the next segment is downloaded on time. Consequently, the original video content can be played out continuously. The detail introduction of a new real-time multimedia streaming system with analysis and simulation follows as below.

• Proceedings of the CALSEC Conference
• /
• 2005.11a
• /
• pp.147-153
• /
• 2005

When a customer wants to buy an item at the Internet shopping mall, one of the difficulties is to decide when to buy the item because its price changes over time. If the shopping mall can be able to recommend appropriate buying points, it will be greatly helpful for the customer. Therefore, in this presentation, we propose a method to recommend buying points based on the time series analysis using a database that contains past prices data of items. The procedure to provide buying points for an item is as follows. First, we search past time series patterns from the database using normalized similarity, which are similar to the current time series pattern of the item. Second, we analyze the retrieved past patterns and predict the future price pattern of the item. Third, using the future price pattern, we recommend when to buy the item.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.184-190
• /
• 2008

This paper describes a message model based on XML (eXtensible Markup Language) to present real-time data from sensors and instruments at manufacturing processes for web service. HTML (Hyper Text Markup Language) is inadequate for describing real-time data from process control plants while it is suitable for displaying non-real-time multimedia data on web. For XML-based web service of process data, XML format for the data presentation was proposed after investigating data of various instruments at steel-making plants. Considering transmission delay inevitably caused from increased message length and processing delay from transformation of raw data into defined format, which was critical for operation of a real-time system, its performance was evaluated by simulation. In the simulation, we assumed two implementation models for conducting the transformation function. In one model, transformation was done at an SCC (Supervisory Control Computer) after receiving real-time data from instruments. In the other model, transformation had been carried out at instruments before the data were transmitted to the SCC. Various tests had been conducted under different conditions of offered loads and data lengths and their results were described.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7445-7449
• /
• 2013

Background: Breast cancer (BC) is the one of the most common cancers in women. It is also a leading cause of death. Unfortunately, some patients initially present with distant metastases and are diagnosed with stage IV disease that is nearly always, by then, incurable. This retrospective analysis investigated the risk factors for stage IV BC that may underlie such late presentation. Materials and Methods: In all, 916 patients with BC who visited the medical oncology polyclinic of eight different centres in Turkeybetween December 2011 and January 2013 were analysed. Results: A total of 115 patients (12.6%) presented with stage IV disease. In univariate analysis; to comparing these with patients at other stages, no statistical difference was found for median diagnosis age or age at menarche (p=0.611 and p=0.820), whereas age at menopause and age at first live birth were significant (p=0.018 and p=0.003). No difference was detected in terms of accompanying diseases, use of oral contraceptives and hormone replacement therapy, smoking, alcohol consumption and the rate of family history of BC between the patients (p=0.655, p=0.389, p=0.762, p=0.813, p=0.229, p=0.737). However, screening methods were employed less often, the rate of illiteracy was higher, and the rate of other cancers was higher in patients with stage IV BC (p=0.022, p=0.022, p=0.018). No statistical difference was observed between the patients in terms of tumour histopathology, and status of oestrogen receptor, progesterone receptor, or human epidermal growth factor-2 receptor (p=0.389, p=0.326, p=0.949, p=0.326). Grade 3 tumours were more frequent in patients with stage IV disease (p<0.001). On multivariate analysis, risk factors for stage IV breast cancer at the time of presentation were found to be age at first live birth and educational level (p=0.003 and p=0.047). Conclusions: Efforts should be made to perform mammography scans, in particular, at regular intervals through national training programs for all women, particularly those with family histories of breast and other types of cancer, and to establish early diagnosis of BC long before it proceeds to stage IV. Additionally, women's education had better be upgraded. In order to make women aware of BC, national education-programmes must be organised.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.877-890
• /
• 1999

In this paper, a multimedia mail including video, sound, graphic data has been proposed as the next generation mail of the text based mail. In order to develop the multimedia mail, the most outstanding problem is the fact that the multimedia data are too huge to send them to the receiving end directly. The fact of big data may cause many problems in both transferring and storing the data of the multimedia mail. Our main idea is to separate between a control program for the multimedia presentation and multimedia data. Since the size of a control program is as small as a plain text mail, it has no problem to send it attached to the internet mail to the receiver directly. Instead, the big multimedia data themselves may remain on the sender's computer or be sent to a designated server so that the data may be transferred to the receiver only when the receiver activates the play of the multimedia mail. In this scheme, our research focus is paced on the buffer management and the thread scheduling for the real time play of the multimedia mail on internet. Another problem is to provide an easy way of editing a multimedia presentation for an ordinary people having no programming knowledge. For the purposed, VIP(Visual Interface Player) has been used and the results or multimedia mail implemented on LAN has been described.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.1
• /
• pp.28-35
• /
• 2011

Background: The aim of the study was to describe the characteristics, treatments, and outcomes of critically ill patients with pandemic Influenza A/H1N1 2009 at a major medical center in Korea. Methods: This retrospective observational study examined critically ill adult patients with pandemic Influenza A/H1N1 2009, who were admitted to the AMC between August and December 2009. Results: 27 patients with confirmed pandemic Influenza A/H1N1 2009 were admitted to the intensive care unit (ICU) at the Asan Medical Center (AMC). The median age (IQR) was 59 years (41~67), and 66.7% of the patients were older than 51 years. A total of 81.5% of the patients had 2 or more co-morbidities. The median time (IQR) from symptom onset to presentation was 2 days (1~4), and the median time from presentation to ICU admission was 0 days (0~1.5). All patients received oseltamivir (300 mg/day) and 13 patients received triple combination therapy (oseltamivir, amantadine, ribavirin). Twelve patients required mechanical ventilation on the first day of ICU admission. A total of 6 patients (22.2%) died within 28 days of admission. The patients who died had significantly higher acute physiology and chronic health evaluation (APACHE) II and sequential organ failure assessment (SOFA) scores at presentation. There were no significant differences in age, co-morbidities, or antiviral regimens between survivors and non-survivors. Conclusion: Critical illness related to pandemic Influenza A/H1N1 2009 was common in elderly patients with chronic co-morbidities. All patients were given high-dose oseltamivir or triple combination antiviral therapy. Nonetheless, patients with critical illnesses associated with pandemic Influenza A/H1N1 2009 had a death rate of 22.2%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.164-173
• /
• 2007

In this paper, we present a time-triggered mechanism for providing energy consumption profiles in the level of C functions. The similar mechanisms have already been introduced at the previous researches such as PowerScope and ePRO. Instead, we, in this paper, introduce our efforts to extend these researches to incorporate power domains and DVS(Dynamic Voltage Scaling), then to provide GUI-based tool as a plug-in to ESTO which is an IDE for Embedded S/W development based on Eclipse. From our experimental results, we could conclude that our approach worked and produced consistent energy consumption profiles on the DVS-applied program codes, and also displayed function level and time domain power consumption information with diverse presentation skills such as tables, phi-chart, bar-chart, 2-D graphs, consequently, is expected to provide more ease-to-use and productive IDE for lower power embedded S/W developers.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1992.07a
• /
• pp.443-447
• /
• 1992

This study describes the strategy for advanced decision support system (ADSS) development for integrated management of water resources and quality in reservoir systems. The developed ADSS consists of database that contain hydrologic data, observed operational data, and data to support specific reservoir operations simulation, optimization models, and water quality models. The optimization model, mass balance simulation model and water quality models are used in a general prototype ADSS, menu driven controlling framework that assists the user to specify and evaluate the alternative operational scenarios at one time. These alternative scenarios are evaluated by the models and the results are compared through the use of a graphical based display system. This graphical based system uses an icon based schematic representation of the system to organize the presentation of the results. The ADSS includes the ability to use monthly or weekly time periods of analysis for the models and it can use monthly historical or stochastically generated inflows.